Beruflich Dokumente
Kultur Dokumente
Module 1
Mathematics
1.1 Arithmetic
1-1
Copyright Ayr College, 2010
Copyright Notice
Copyright. All rights reserved. No part of this textbook including Ayr College logo and
branding may be reproduced in any form or by any means without prior permission in writing to
the Marketing and PR Manager..
LEVEL 1
A familiarisation with the principal elements of the subject.
Objectives: The applicant should be familiar with the basic elements of the subject.
The applicant should be able to give a simple description of the whole subject, using common words and
examples.
The applicant should be able to use typical terms.
LEVEL 2
A general knowledge of the theoretical and practical aspects of the subject.
An ability to apply that knowledge.
Objectives: The applicant should be able to understand the theoretical fundamentals of the subject.
The applicant should be able to give a general description of the subject using, as appropriate, typical
examples.
The applicant should be able to use mathematical formulae in conjunction with physical laws describing the
subject.
The applicant should be able to read and understand sketches, drawings and schematics describing the
subject.
The applicant should be able to apply his knowledge in a practical manner using detailed procedures.
LEVEL 3
1-2
Copyright Ayr College, 2010
Record of Revisions
Revision
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Issue Date
Inserted By
Date Inserted
1-3
Copyright Ayr College, 2010
Table of Contents
Module 1.1 Arithmetic_________________________________________________________7
Fractions__________________________________________________________________7
Types of Fractions_________________________________________________________7
Working with Fractions______________________________________________________7
Decimals_________________________________________________________________17
Working with Decimals_____________________________________________________17
Conversion Between Fractions and Decimals__________________________________23
Convert a Decimal to a Fraction______________________________________________23
Convert a Fraction to a Decimal______________________________________________23
Percentages______________________________________________________________29
Definition________________________________________________________________29
Changing a Fraction to a Percentage__________________________________________29
Changing a Percentage to a Fraction__________________________________________29
Changing a Percentage to a Decimal__________________________________________29
Changing a Decimal to a Percentage__________________________________________30
Values of a Percentage of a Quantity__________________________________________30
Expressing one Quantity as a Percentage of Another_____________________________30
Rounding, Significant Figures, and Decimal Places______________________________35
Rounding_______________________________________________________________35
Significant Figures________________________________________________________36
Decimal Places___________________________________________________________37
Mean, Median, Mode and Range______________________________________________39
Definitions_______________________________________________________________39
Calculating Mean_________________________________________________________39
Calculating Median________________________________________________________40
Calculating Mode_________________________________________________________40
Calculating Range________________________________________________________41
Angles___________________________________________________________________47
Definitions and Conversions_________________________________________________47
Degrees and Radians: Measuring Angles______________________________________48
Acute Angles_____________________________________________________________49
Obtuse Angles___________________________________________________________49
Reflex angles____________________________________________________________49
Right Angles_____________________________________________________________50
Complementary Angles____________________________________________________50
Supplementary Angles_____________________________________________________51
Perpendicular Lines_______________________________________________________51
Triangles_________________________________________________________________57
Properties of shapes.______________________________________________________57
Definitions_______________________________________________________________57
1-4
Copyright Ayr College, 2010
1-5
Copyright Ayr College, 2010
EASA 66 Reference
Arithmetic
Arithmetical terms and signs, methods of multiplication
and division, fractions and decimals, factors and multiples,
weights, measures and conversion factors, ratio and
proportion, averages and percentages, areas and volumes,
squares, cubes, square and cube roots.
1.1
1-6
Copyright Ayr College, 2010
Level
2
2.
3.
etc
etc
Mixed Numbers. These include whole numbers and vulgar fractions. For example:
1
4
1
3
6
, 2 , 6
, 27
etc
5
7
2
11
4.
For all fractions, the number above the bar is called the numerator and the number below
the bar is called the denominator.
5.
Simplest Form.
30
1
is
.
60
2
simplest form by dividing numerator and denominator by equal numbers until they will not
divide further. For example:
8
2
=
12
3
denominator by 4).
1-7
Copyright Ayr College, 2010
7.
Converting.
To convert mixed numbers to improper fractions, multiply the whole
number by the denominator and add to the numerator. For example:
2
3
13
=
5
5
8.
Cancelling.
Cancelling improper fractions involves exactly the same process as
cancelling vulgar fractions. For example:
28
7
=
= 7
4
1
9.
45
15
1
=
= 7
2
2
6
and
Multiplication
(a)
Express all mixed numbers as improper fractions
(b)
(c)
(d)
(e)
(f)
Examples:
(1)
2
2
4
8
x4 =
x
=
9
9
1
9
(2)
1
10.
4
1
5
9
7
5
1
x 2
x
=
x
x
5
3
14
5
3
14
Division
(a)
(b)
(c)
Examples:
1
1-8
Copyright Ayr College, 2010
3
2
= 1
1
2
(1)
3
5
3
12
1
=
7
4
7
4
(2)
3
7
4
(3)
3
5
16
8
3
1
x
4
7
3
7
x
12
4
3
16
x
5
8
7
16
3
28
=
2
6
5
1
5
1
11.
Example:
1
9
3
1
5
7
4
x 1
=
2
4
2
7
4
3
7
2
12
x
x
4
9
7
1
12.
12
7
7
2
12
x
x
4
9
7
1
=
2
3
Addition
(a)
Express all fractions as mixed numbers in lowest terms
(b)
(c)
To add the vulgar fractions, you must convert each fraction so that their
denominators are all the same. This is done by finding the lowest common
multiple (LCM) of the denominators.
1-9
Copyright Ayr College, 2010
Examples:
(1)
1
1
3
659
+
+
=
10
30
5
6
(2)
9
5
3
+
+ 1
4
12
8
= 2
= 3 +
1
5
3
+
+
12
8
4
= 3 +
6 10 9
24
= 3 + 1
20
30
2
3
1
5
3
+
+ 1
4
12
8
= 3 +
1
24
= 4
25
24
1
24
Note: If your addition of fractions results in an improper fraction, you must convert this to
a mixed number as shown in example (2).
13.
Subtraction
The same basic procedure should be used for subtraction as for addition.
Examples:
(1)
(2)
2
8
86
2
=
=
9
9
3
9
8
4
2
4
2
4
- 1
= 2
- 1
= 1 +
3
7
3
7
3
7
= 1 +
(3)
14 12
21
2
21
1
3
1
3
- 1
= 3 +
3
4
3
4
= 3 +
49
12
= 2 +
12 4 9
12
16 9
12
converted to
= 2 +
= 2
1-10
Copyright Ayr College, 2010
12
before the
12
7
12
14.
1
7
3
- 5
+ 3
12
2
4
= 2
(2)
= 2 +
8
12
2
3
1
3
1
- 1
+ 4
3
8
4
= 4 +
15.
679
12
= 2 +
= 5 +
24 3 18 8
24
3 18 8
24
17
24
Remember that your final step in any calculation must be to simplify (cancel fractions).
Example:
3
3
9
3
+ 1
- 2
10
5
4
= 2
15
20
= 2 +
12 18 15
20
3
4
1-11
Copyright Ayr College, 2010
Intentionally Blank
1-12
Copyright Ayr College, 2010
Worksheet
1.
2.
7.
4
9
(c)
21
3
5
(d)
21
25
1
7
(e)
11
3
(b)
21
5
53
7
(c)
(d)
210
4
(e)
99
8
6
14
x
7
15
(b)
2
1
2
x 2
x 1
3
7
5
(c) 1
2
3
10
x
x
5
8
21
3
9
10
25
(b)
2
1
3
3
7
(c)
(c)
17
1
1
2
x7
29
8
4
(c)
2
3
4
+
+
3
4
5
1
1
3
3
9
6.
5.
(b)
4.
6
7
3.
7
5
3
x
x
10
14
6
(b)
1
15
3
x
5
24
8
2
3
+
3
7
(d)
1
1
1
1
1
+
+
+
+
2
3
4
5
6
(b)
3
1
2
+
+
4
2
3
(e)
1
7
+
8
16
(a)
(d)
4
2
11
7
(b)
3
2
- 2
4
5
(e)
(c)
7
2
1
- 2
5
7
4
2
- 8
9
3
1-13
Copyright Ayr College, 2010
8.
(a)
(d)
(g)
1
1 4
1 x2
5
3 5
1 5
2
2 6
1 2
2 3
3
7
1-14
Copyright Ayr College, 2010
3
1
7 1
1 1
4
8 2
5
(e)
2 7 1
2
2 x 3 4
7 24 2
3
(i)
(b)
1
1
5
1 2
2
3 42
(h)
3
1
1 1
5
3
1
(c)
(f) 3
1 2 5
3 7 6
3 3
x
4 7
1 1
1
1 2
3 2
2
5 3 1
16 4 3
2 1 1
3 4 6
Answers
20
7
a)
2.
a) 3
3.
a)
4
5
b) 2
4.
a)
5
6
b) 1
5.
a)
1
8
b) 12
6.
a) 1
7.
a)
8.
a) 4
f)
2
3
2
21
9
10
61
72
5
6
b)
31
9
1.
b) 4
1
5
c)
c) 7
c)
1
6
108
5
4
7
d)
146
25
d) 52
15
7
e) 12
3
8
1
4
c) 3
c) 2
11
12
c) 2
b) -
13
20
c) -
26
35
d)
b) -
5
7
c) 2
4
9
d)
g) 1
5
12
h) -
5
36
i) 1
b) 1
1
2
e)
13
60
e) 3
9
16
6
77
e) -1
2
9
3
5
e) 1
d) 1
9
20
19
55
11
24
1-15
Copyright Ayr College, 2010
Intentionally Blank
1-16
Copyright Ayr College, 2010
Decimals
Working with Decimals
1.
Decimals are a very important and particular set of fractions. They are fractions whose
denominators are powers of 10, i.e. 10, 100, 1000, 10000 etc (do not be concerned
about the meaning of 'powers of 10', you will deal with this later in the course). Decimals
are not written in the usual fraction form, but in shorthand using a decimal point.
Examples:
a)
1
= 0.1
10
d) 5
2.
b)
7
= 5.7
10
e)
1
= 0.01
100
63
c)
1
= 0.001
1000
7
= 63.07
100
If you have difficulty in relating decimals to fractions, the following table may help.
THOUSANDS
HUNDREDS
TENS
UNITS
TENTHS
HUNDREDTHS
THOUSANDTHS
1000
100
10
1
10
1
100
1
1000
The number of digits after the decimal point is called decimal places.
Examples:
4.
a)
b)
c)
d)
In addition of decimals, particular care must be taken to ensure that decimal points are
in line.
Example:
27.3
0.021
68.3
95.621
1-17
Copyright Ayr College, 2010
5.
6.
27.3
4.36
22.94
When multiplying decimals, ignore the decimal point until the final answer is obtained,
then count the number of decimal places in both the numbers being multiplied. This is
the number of decimal places in the answer.
Example:
Note: It does not matter which you multiply first (i.e. the 9, the 3 or the 1) providing 00 is
placed before the answer when multiplying out the 100s (in this case the 9) and 0 is
placed before the answer when multiplying out the 10s (in this case the 3) So the above
calculation could have looked like this:
273
931
273
8 190
245 700
254 163
7.
5.2
462)2402.4
2310
924
924
1-18
Copyright Ayr College, 2010
24.024 24
4.62
5
Worksheet
1.
2.
18.098 + 210.099
c)
0.025 + 10.995
21.76 - 18.51
b)
32.76 - 20.086
c)
10.75 - 19.999
b)
1.27 x 0.871
c)
-1.01 x 0.89
b)
3.375 1.5
4.
b)
Evaluate:
a)
3.
0.251 + 10.298
5.05 x 13.8
Calculate:
a)
42.39 0.09
c)
0.002 0.8
1-19
Copyright Ayr College, 2010
Intentionally Blank
1-20
Copyright Ayr College, 2010
Answers
1.
a) 10.549
b) 228.197 c) 11.02
2.
a) 3.25
b) 12.674
3.
a) 69.69
b) 1.10617 c) -0.8989
4.
a) 471
b) 2.25
c) -9.249
c) 0.0025
1-21
Copyright Ayr College, 2010
Intentionally Blank
1-22
Copyright Ayr College, 2010
a)
0.8 =
b)
6.25 = 6 +
c)
0.037 =
4
5
25
1
= 6
100
4
37
1000
a)
4
=
5
0.375
8 3.000
b)
3
=
8
0.8333
6 5.0000
c)
5
=
6
Here, we cut off the result to the number of decimal places required.
Thus
5
= 0.83 correct to 2 decimal places
6
or
5
= 0.8333 correct to 4 decimal places
6
Module 1.1 Aritmetic
1-23
Copyright Ayr College, 2010
Intentionally Blank
1-24
Copyright Ayr College, 2010
Worksheet
1.
2.
b)
0.02
c)
0.004
3.
0.73
5
8
b)
13
15
c)
3
200
b)
2
7
, 0.44 and
5
16
1
3
, 0.167 and
6
20
1-25
Copyright Ayr College, 2010
Intentionally Blank
1-26
Copyright Ayr College, 2010
Answers
73
100
1.
a)
2.
a) 0.63
3.
a)
b)
1
50
0.87
3
1
,
and 0.167
20
6
c)
1
250
0.02
b)
2
7
,
and 0.44
5 16
1-27
Copyright Ayr College, 2010
Intentionally Blank
1-28
Copyright Ayr College, 2010
Percentages
Definition.
A percentage is a fraction whose denominator is 100.
Example:
3% means
3
100
3
as a percentage =
5
3
x 100% = 60%
5
a)
b)
8% as a fraction =
8%
8
2
100% 100 25
12 % as a fraction =
12 21 %
100%
25 1
25 1
x
2 100 200 8
65
, as a decimal = 0.65
100
a)
65% as a fraction =
b)
32 % as a fraction =
32 21
100
, as a decimal = 0.325
1-29
Copyright Ayr College, 2010
0.021 as a fraction =
21
2.1
,=
, as a percentage = 2.1%
1000
100
b)
0.037 as a fraction =
37
3.7
,=
, as a percentage = 3.7%
1000
100
a)
4
4% of 60 =
x 60
100
12
5
= 2
2
5
5
b)
3 21
3 % of 1500 =
x 1500
100
7
105
x 1500 =
= 52
200
2
12 as a percentage of 50 =
b)
4 as a percentage of 60 =
1-30
Copyright Ayr College, 2010
12
x 100
50
24%
4
x 100 = 6.67%
60
Worksheet
1.
2.
3.
4.
Calculate:
a)
4% of 30
b)
0.8% of 360
d)
120% of 75
e)
80% of 90
c)
1.5% of 60
Express:
a)
30 as a percentage of 50
b)
24 as a percentage of 16
c)
d)
e)
0.6
b)
0.35
c)
0.48
d)
0.05
e)
0.325
f)
25%
g)
13%
h)
4.5%
i)
16 %
b)
0.025
c)
1.25
d)
f)
1
12
g)
Express as a percentage:
a)
e)
0.43
3
7
2
3
3
8
1-31
Copyright Ayr College, 2010
Intentionally Blank
1-32
Copyright Ayr College, 2010
Answers
1
or 1.2
5
1.
a) 1
2.
a) 60%
3.
a)
3
5
b)
7
20
c)
12
25
d)
1
20
f)
1
4
g)
13
100
h)
9
200
i)
49
300
4.
a) 43%
f) 8
1
%
3
b)
2.88
b) 150%
b) 2.5%
g) 37
c)
0.9 d)
c) 4%
c) 125%
90 e) 72
d) 133
d) 66
1
1
% e) 11 %
3
9
2
%
3
e)
13
40
e) 42
6
%
7
1
%
2
1-33
Copyright Ayr College, 2010
Intentionally Blank
1-34
Copyright Ayr College, 2010
Examples:
3.044 rounded to hundredths is 3.04 (because the next digit, 4, is less than 5).
3.045 rounded to hundredths is 3.05 (because the next digit, 5, is 5 or more).
3.0447 rounded to hundredths is 3.04 (because the next digit, 4, is less than 5).
For negative numbers the absolute value is rounded.
Examples:
2.1349 rounded to hundredths is 2.13
2.1350 rounded to hundredths is 2.14
Round to Even Method: This method is also known as unbiased rounding, convergent
rounding, statistician's rounding or bankers' rounding. It is identical to the common method of
rounding except when the digit(s) following the rounding digit start with a five and have no nonzero digits after it. The new algorithm is:
With all rounding schemes there are two possible outcomes: increasing the rounding digit by
one or leaving it alone. With traditional rounding, if the number has a value less than the halfway mark between the possible outcomes, it is rounded down; if the number has a value exactly
half-way or greater than half-way between the possible outcomes, it is rounded up. The roundModule 1.1 Aritmetic
1-35
Copyright Ayr College, 2010
to-even method is the same except that numbers exactly half-way between the possible
outcomes are sometimes rounded up - sometimes down.
Although it is customary to round the number 4.5 up to 5, in fact 4.5 is no nearer to 5 than it is to
4 (it is 0.5 away from both).
When dealing with large sets of scientific or statistical data, where trends are important,
traditional rounding on average biases the data upwards slightly. Over a large set of data, or
when many subsequent rounding operations are performed as in digital signal processing, the
round-to-even rule tends to reduce the total rounding error, with (on average) an equal portion
of numbers rounding up as rounding down. This generally reduces the upwards skewing of the
result.
Round-to-even is used rather than round-to-odd as the latter rule would prevent rounding to a
result of zero.
Examples:
3.016 rounded to hundredths is 3.02 (because the next digit (6) is 6 or more)
3.013 rounded to hundredths is 3.01 (because the next digit (3) is 4 or less)
3.015 rounded to hundredths is 3.02 (because the next digit is 5, and the hundredths
digit (1) is odd)
3.045 rounded to hundredths is 3.04 (because the next digit is 5, and the hundredths
digit (4) is even)
3.04501 rounded to hundredths is 3.05 (because the next digit is 5, but it is followed by
non-zero digits)
Significant Figures
Rounding to n significant figures is a form of rounding. Significant figures (also called significant
digits) can also refer to a crude form of error representation based around significant figure
rounding.
Rounding to n significant figures is a more general-purpose technique than rounding to n
decimal places, since it handles numbers of different scales in a uniform way.
Rules of Significant Figures
All non-zero digits are significant. Example: '123.45' has five significant figures: 1,2,3,4
and 5.
Zeros appearing in between two non-zero digits are significant. Example: '101.12' has
five significant figures: 1,0,1,1,2.
All zeros appearing to the right of an understood decimal point or non-zeros appearing to
the right of a decimal after the decimal point are significant. Example: '12.2300' has six
significant figures: 1,2,2,3,0 and 0. The number '0.00122300' still only has six significant
figures (the zeros before the '1' are not significant). In addition, '12.00' has four significant
figures.
All zeros appearing in a number without a decimal point and to the right of the last nonzero digit are not significant unless indicated by a bar. Example: '1300' has two
significant figures: 1 and 3. The zeros are not considered significant because they don't
have a bar. However, 1300.0 has five significant figures.
1-36
Copyright Ayr College, 2010
However, this last convention is not universally used; it is often necessary to determine from
context whether trailing zeros in a number without a decimal point are intended to be significant.
Digits may be important without being 'significant' in this usage. For instance, the zeros in '1300'
or '0.005' are not considered significant digits, but are still important as placeholders that
establish the number's magnitude. A number with all zero digits (e.g. '0.000') has no significant
digits, because the uncertainty is larger than the actual measurement.
Examples:
Rounding to 2 significant figures:
One issue with rounding to n significant figures is that the value of n is not always clear. This
occurs when the last significant figure is a zero to the left of the decimal point. For example, in
the final example above, when 19 800 is rounded to 20 000, it is not clear from the rounded
value what n was used - n could be anything from 1 to 5. The level of rounding can be specified
explicitly. The abbreviation s.f. is sometimes used, for example "20,000 to 2 s.f."
Scientific notation could be used to reduce the ambiguity, as in (2.0 10 4). As always, the best
approach is to state the uncertainty separately and explicitly, as in 20,000 1%, so that
significant-figures rules do not apply.
A less common method of presenting ambiguous significant figures is underlining the last
significant figure of a number, for example "20000"
Decimal Places
The precision of a value describes the number of digits that are used to express that value. In
a scientific setting this would be the total number of digits (sometimes called the significant
digits) or, less commonly, the number of fractional digits or places (the number of digits following
the point). This second definition is useful in financial and engineering applications where the
number of digits in the fractional part has particular importance.
In both cases, the term precision can be used to describe the position at which an inexact result
will be rounded. For example, in floating-point arithmetic, a result is rounded to a given or fixed
precision, which is the length of the resulting significand. In financial calculations, a number is
often rounded to a given number of places (for example, to two places after the point for many
world currencies).
As an illustration, the decimal quantity 12.345 can be expressed with various numbers of
significant digits or decimal places. If insufficient precision is available then the number is
Module 1.1 Aritmetic
1-37
Copyright Ayr College, 2010
rounded in some manner to fit the available precision. The following table shows the results for
various total precisions and decimal places, with the results rounded to nearest where ties
round up or to an even digit (the most common rounding modes).
Note that it is often not appropriate to display a figure with more digits than that which can be
measured. For instance, if a device measures to the nearest gram and gives a reading of
12.345 kg, it would create false precision if you were to express this measurement as
12.34500 kg.
Rounded to n
significant
digits
Rounded to n
decimal places
Five
12.345
12.34500
Four
12.35
12.3450
Three
12.3
12.345
Two
12
12.35
One
1 101
12.4
Zero
n/a
12
1-38
Copyright Ayr College, 2010
Median:
Mode:
Calculating Mean
To find the mean, you need to add up all the data, and then divide this total by the number of
values in the data.
Example 1: Find the Mean of
2, 2, 3, 5, 5, 7, 8
32 7 = 4.57...
2, 3, 3, 4, 6, 7
2 + 3 + 3 + 4 + 6 + 7 = 25
25 6 = 4.33...
1-39
Copyright Ayr College, 2010
Calculating Median
To find the median, you need to put the values in order, then find the middle value. If there are
two values in the middle then you find the mean of these two values.
Example 1: Find the median of
2, 2, 3, 5, 5, 7, 8
2, 3, 3, 4, 6, 7
2 , 3 , (3 , 4) , 6 , 7
This time there are two values in the middle. They have been put in brackets. The median is
found by calculating the mean of these two values: (3 + 4) 2 = 3.5
So the median is 3.5
Calculating Mode
The mode is the value which appears the most often in the data. It is possible to have more
than one mode if there is more than one value which appears the most.
Example 1: Find the mode of
The data values:
2, 2, 3, 5, 5, 7, 8
2,2,3,5,5,7,8
The values which appear most often are 2 and 5. They both appear more time than any of the
other data values.
So the modes are 2 and 5
Example 2: Find the mode of
2, 3, 3, 4, 6, 7
1-40
Copyright Ayr College, 2010
Calculating Range
To find the range, you first need to find the lowest and highest values in the data. The range is
found by subtracting the lowest value from the highest value.
Example 1: Find the range of
2, 2, 3, 5, 5, 7, 8
2, 3, 3, 4, 6, 7
1-41
Copyright Ayr College, 2010
Intentionally Blank
1-42
Copyright Ayr College, 2010
Worksheet
1.
2.
Calculate the mean, median, mode and range for each set of data below:
(a) 3, 6, 3, 7, 4, 3, 9
(b) 11, 10, 12, 12, 9, 10, 14, 12, 9
(c) 2, 9, 7, 3, 5, 5, 6, 5, 4, 9
1-43
Copyright Ayr College, 2010
Intentionally Blank
1-44
Copyright Ayr College, 2010
Answers
1
(a)
(b)
(a)
Mean = 5
Median = 4
Mode = 3
Range = 6
(b)
Mean = 11
Median = 11
Mode = 12
Range = 5
(c)
(d)
(c)
Mean = 5.5
Median = 5
Mode = 5
Range = 7
1-45
Copyright Ayr College, 2010
Intentionally Blank
1-46
Copyright Ayr College, 2010
Angles
Definitions and Conversions
We can specify an angle by using a point on each ray and the vertex. The angle below may be
specified as angle ABC or as angle CBA; you may also see this written as
ABC or as CBA. Note how the vertex point is always given in the middle.
Example:
Many different names exist for the same angle. For the angle below,
and WBA are all names for the same angle.
PBC,
PBW,
CBP,
1-47
Copyright Ayr College, 2010
Note:
no
x 2 where no is the number of degrees
360
60 seconds = 1 minute
60 minutes = 1 degree
1-48
Copyright Ayr College, 2010
Acute Angles
An acute angle is an angle measuring between 0 and 90 degrees.
Example:
The following angles are all acute angles.
Obtuse Angles
An obtuse angle is an angle measuring between 90 and 180 degrees.
Example:
The following angles are all obtuse.
Reflex angles
A reflex angle is an angle measuring between 180 and 360 degrees
1-49
Copyright Ayr College, 2010
Right Angles
A right angle is an angle measuring 90 degrees. Two lines or line segments that meet at a right
angle are said to be perpendicular. Note that any two right angles are supplementary angles (a
right angle is its own angle supplement).
Complementary Angles
Two angles are called complementary angles if the sum of their degree measurements equals
90 degrees. One of the complementary angles is said to be the complement of the other.
Example:
These two angles are complementary.
Note that these two angles can be "pasted" together to form a right angle!
1-50
Copyright Ayr College, 2010
Supplementary Angles
Two angles are called supplementary angles if the sum of their degree measurements equals
180 degrees. One of the supplementary angles is said to be the supplement of the other.
Example:
These two angles are supplementary.
Note that these two angles can be "pasted" together to form a straight line!
Perpendicular Lines
Two lines that meet at a right angle are perpendicular. They are also said to be normal to each
other.
1-51
Copyright Ayr College, 2010
Intentionally Blank
1-52
Copyright Ayr College, 2010
Worksheet
1.
a)
d)
b)
e)
c)
f)
1-53
Copyright Ayr College, 2010
Intentionally Blank
1-54
Copyright Ayr College, 2010
Answers
1.
a)
d)
radians b)
23
180
radians
radians
e) 2/5 radians
c)
radians
f) 2/3 radians
1-55
Copyright Ayr College, 2010
Intentionally Blank
1-56
Copyright Ayr College, 2010
Triangles
Properties of shapes.
The 3 properties of shapes that we are going to look at are:
1. The number of sides
2. The interior angles (the angles inside).
3. The length of the sides.
These properties help use to remember which shapes are which and why they are so called (in
some cases).
Let's start with a shape that has 3 sides: TRIANGLES (tri- means 3).
Triangles ALWAYS have 3 sides.
The interior angles of a triangle add up to 180 degrees.
Definitions
Here are the triangles you are expected to know about:
1. Equilateral Triangle
2. Isosceles Triangle
3. Right- Angled Triangle
4. Scalene Triangle
2.
Congruent and Similar are two words usually applied to triangles but can equally be applied to
other shapes.
Congruent triangles are two triangles which have equal angles and are the same size (i.e.
identical in every way) but may be oriented differently.
Similar triangles are two triangles which have the same angles but are of different size.
1-57
Copyright Ayr College, 2010
3.
Equilateral Triangle
An equilateral triangle has got 3 sides of equal length and 3 angles that are equal.
Since ALL the angles in a triangle add up to 180 then 180 divided by 3 must be 60.
Isosceles Triangle
An Isosceles triangle has got two sides of equal length and 2 angles equal.
What is the value of the angle at the top of this Isosceles triangle?
The answer is 80. All angles in a triangle add up to 180 so 180 - (50 + 50) = 80
So an isosceles triangle has only got two sides of equal length and two angles the same.
1-58
Copyright Ayr College, 2010
5.
The right angled triangle contains a right angle (an angle of 90)
In a right angled triangle what must the other two angles add up to 90 because all the angles in
a triangle add up to 180 and a Right Angled Triangle has got one angle of 90.
6.
Scalene Triangle
A scalene triangle is the easiest of them all. The scalene triangle has got NO sides of equal
length and NO angles the same.
1-59
Copyright Ayr College, 2010
Intentionally Blank
1-60
Copyright Ayr College, 2010
Square
The area A of any square is equal to the square of the length s of a side.
Formula: A = s2
1-61
Copyright Ayr College, 2010
Triangle
The area A of any triangle is equal to one-half the product of any base b and corresponding
height h.
Formula: A = bh
Parallelogram
A parallelogram is a 4 sided shape with the 2 opposing sides parallel to each other.
The area A of any parallelogram is equal to the product of any base b and the corresponding
height h.
Formula: A = bh
1-62
Copyright Ayr College, 2010
Rhombus
A rhombus is a parallelogram with all 4 sides equal length. The diagonals bisect the interior
angles equally and the diagonals intersect each other at right angles.
The area A of any rhombus is equal to one-half the product of the lengths d1 and d2 of its
diagonals.
Formula: A = d1d2
or
Formula: A = bh as in the parallelogram
1-63
Copyright Ayr College, 2010
Trapezium
A trapezium has only 2 sides parallel. (UK definition)
The area A of any trapezium is equal to one-half the product of the height h and the sum of the
bases, b1 and b2.
Formula: A = h (b1 + b2)
1-64
Copyright Ayr College, 2010
Kite
A Kite shape has no sides parallel. The area can be found by
Formula: A = d1d2
Circle
The area A of any circle is equal to the product of and the square of the radius r.
Formula: A = r2
1-65
Copyright Ayr College, 2010
The angle shown is one equal portion of 360 degrees. In the case of the pentagon, it is 360/5
= 72o. Hence the internal angle of any polygon can be found by calculating the supplement of
the external angle.
1-66
Copyright Ayr College, 2010
Summary of Quadrilaterals
SQUARE
4 Sides equal
4 right angles
Diagonals bisect each other at right angles
Diagonals are equal
RECTANGLE
2 pairs of opposite sides equal and parallel
4 right angles
Diagonals are equal and bisect each other
RHOMBUS
4 sides equal , opposite sides parallel
Diagonals bisect each other but are not of equal length
PARALLELOGRAM
2 pairs opposite sides equal and parallel
Diagonals bisect each other but are not of equal length
TRAPEZIUM / TRAPEZOID
1 pair opposite sides parallel
or
KITE
2 pairs of adjacent sides equal
Longer diagonal bisects shorter at right angles
1-67
Copyright Ayr College, 2010
Intentionally Blank
1-68
Copyright Ayr College, 2010
Common Solids
1.
The lateral area L (area of the vertical sides only) of any right prism is equal to the perimeter of
the base times the height of the prism (L = Ph).
The total area T of any right prism is equal to two times the area of the base plus the lateral
area.
Formula: T = 2B + Ph
1-69
Copyright Ayr College, 2010
2.
The volume V of any right prism is the product of B, the area of the base, and the height h of the
prism.
Formula: V = Bh
1-70
Copyright Ayr College, 2010
3.
Pyramid Volume
A pyramid is a polyhedron with a single base and lateral faces that are all triangular. All lateral
edges of a pyramid meet at a single point, or vertex.
The volume V of any pyramid with height h and a base with area B is equal to one-third the
product of the height and the area of the base. This applies even if the prism is not a rightprism i.e. the axis is not perpendicular to the base. The height however, is still measured
perpendicular to the base as shown below.
Formula: V =
Bh
A regular pyramid is a pyramid that has a base that is a regular polygon and with lateral faces
that are all congruent isosceles triangles.
1-71
Copyright Ayr College, 2010
4.
Cylinder Volume
The volume V of any cylinder with radius r and height h is equal to the product of the area of a
base and the height.
Formula: V = r2h
5.
For any right circular cylinder with radius r and height h, the total surface area T is two times the
area of the base (2 r2) plus the curved surface area (2 rh).
Formula: T = 2 r h
1-72
Copyright Ayr College, 2010
+ 2 r2
6.
Cone Volume
The volume V of any cone with radius r and height h is equal to one-third the product of the
height and the area of the base.
Formula: V =
7.
r2h
The total surface area T of a cone with radius r and slant height l is equal to the area of the
base ( r2) plus times the product of the radius and the slant height.
Formula: T = r l +
r2
1-73
Copyright Ayr College, 2010
8.
The volume V for any sphere with radius r is equal to four-thirds times the product of
and the
cube of the radius. The area A of any sphere with radius r is equal to 4 times the square of
the radius.
Volume Formula: V =
r3
1-74
Copyright Ayr College, 2010
Worksheet
1.
A grave is dug 2m x 1m x 1m deep. The earth removed is piled into a pyramid of circular
base 2 m diameter. Find the height of the pyramid (in terms of ).
Give the answer in m, cm and mm.
2.
the remaining volume of the prism material. Give the answer in terms of and in
mm3
the surface area of the inside of the hole. Give the answer in terms of and in
mm2
3.
Find the surface area of a right cone with base radius 3 inches and perpendicular height
of 4 inches. Leave the answer in terms of and include the base area.
4.
Find the ratio of the surface area to volume of spheres of the following diameters:
a)
b)
c)
2m
4m
8m
1-75
Copyright Ayr College, 2010
Intentionally Blank
1-76
Copyright Ayr College, 2010
Answers
1.
2.
a)
b)
400 cm2,
3.
4.
40,000 mm2
24 in2
a)
b)
c)
3:1
1 :1
:1
1-77
Copyright Ayr College, 2010
Intentionally Blank
1-78
Copyright Ayr College, 2010
Common Conversions
Length
metric >
imperial
1 millimetre [mm]
0.0394 in
1 centimetre [cm]
10 mm
0.3937 in
1 metre [m]
100 cm
1.0936 yd
1 kilometre [km]
1000 m
0.6214 mile
imperial >
metric
1 inch [in]
2.54 cm
1 foot [ft]
12 in
0.3048 m
1 yard [yd]
3 ft
0.9144 m
1 mile
1760 yd
1.6093 km
1 nautical mile
1.15 mile
1.852 km
Area
imperial >
metric
1 sq inch [in ]
6.4516 cm
metric >
imperial
1 sq cm [cm ]
100 mm
0.1550 in2
1 sq foot [ft2]
144 in2
0.0929 m2
1 sq m [m2]
10,000 cm2
1.1960 yd2
1 sq yd [yd2]
9 ft2
0.8361 m2
1 hectare [ha]
10,000 m2
2.4711 acres
1 acre
4840 yd2
4046.9 m2
100 ha
0.3861 mile2
1 sq mile [mile2]
640 acres
2.59 km2
1 sq km [km ]
Volume
metric >
imperial
0.0610 in3
1 cu cm [cm ]
1 cu decimetre [dm3]
1,000 cm3
0.0353 ft3
1 cu metre [m3]
1,000 dm3
1.3080 yd3
1 litre [l]
1 dm3
1.76 pt
1 hectolitre [hl]
100 l
21.997 gal
imperial >
metric
16.387 cm3
1 cu inch [in ]
1 cu foot [ft3]
1,728 in3
28.413 ml
1 pint [pt]
20 fl oz
0.5683 l
1 gallon [gal]
8 pt
4.5461 l
metric
1 fluid ounce
1.0408 UK fl oz
29.574 ml
0.8327 UK pt
0.4731 l
1 gallon
0.8327 UK gal
3.7854 l
0.0283 m3
1-79
Copyright Ayr College, 2010
imperial >
Mass
metric >
imperial
1 milligram [mg]
0.0154 grain
1 gram [g]
1,000 mg
0.0353 oz
1 kilogram [kg]
1,000 g
2.2046 lb
1 kilogram [kg]
1,000 g
0.068 slug
1 tonne [t]
1,000 kg
1-80
Copyright Ayr College, 2010
metric
1 ounce [oz]
1 pound [lb]
16 oz
0.4536 kg
1 stone
14 lb
6.3503 kg
1 hundredweight [cwt]
112 lb
50.802 kg
1 slug
14.6 kg
20 cwt
1.016 t
2,000 lb
0.907 t
Intentionally Blank
1-81
Copyright Ayr College, 2010