Beruflich Dokumente
Kultur Dokumente
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
PASO 1
Conexin de ADSL2 + gestor de trfico del mdem
Si tiene un
abajo:
1.
2.
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
If you have a PSTN telephone line (normal analog line) connect the router
as shown below:
1.
2.
Connect one end of the RJ-45 Ethernet Cable to your PCs Ethernet port
and the other end to one of the 3 LAN ports of the Wireless ADSL
MODEM ROUTER. ATTENTION:The LAN port no 4 (purple marking)
can only be used for Set-Top-Box (STB) connection.
Connect the supplied RJ11 telephone cable from your home's telephone
jack to the "LINE " port of the supplied ATF085A splitter. Connect the other
supplied RJ11 telephone cable to the " DSL " port of the splitter and
connect the other end of this cable to the " LINE " port of your WLAN
ADSL2+ Router.
LED Meaning
Your WLAN ADSL2+ Router has indicator lights on the front side.
Please see below for an explanation of the function of each indicator light.
: Power indicator
: ADSL Link indicator
: ADSL Active indicator
: Wireless Active indicator
: Ethernet Active indicator
On
Flash
Off
Ready
Not Ready
Power Off
Green N/AActive
ADSL
Green
Connect to
DSLAM
IDLE
ADSL
Disconnect to
DSLAM
Green N/AWireless
Active
Green
Ethernet
Connected
N/A
N/A
Transmit /
Receive Data
Ethernet
Disconnected
STEP 2
Configuration Procedures
2. Single right click on " Local Area connection ", then click
" Properties ".
4. Check " Obtain an IP address automatically " and " Obtain DNS
server address automatically " then click on " OK " to continue.
5. Click " Show icon in notification area when connected " (see screen
image in 3. above) then Click on " OK " to complete the setup
procedures.
2. Single right click on " Local Area connection ", then click
" Properties ".
3. The screen will display the information " User Account Control " and
click " Continue " to continue.
4. Double click on " Internet Protocol Version 4(TCP/IPv4) ".
5. Check " Obtain an IP address automatically " and " Obtain DNS
server address automatically " then click on " OK " to continue.
6.You can see the screen will appear as shown in step 4. above, then click
on " OK " to complete the setup procedures.
STEP 3
WLAN ADSL2+ Router Configuration
5. Please fill in the User name and Password fields with those ones which
have been provided to you during the purchase of the conn-x package and
press "Save configuration". Please wait for 2-3 minutes.
NOTE: The User name must be followed by @otenet,gr
(username@otenet.gr).
STEP 4
Connect Wirelessly
For easy installation it is advised to keep the default settings. You can later
change the wireless settings via the wireless configuration menu. (see user
manual on the CD Chapter 9 and other)or, if you want to change the
network key now and/or to change the password on devices login
webpage, please go to below step 5.
In case the below settings do not appear on your computer, please check
your Wireless USB Stick or your Wireless Network Card User Manuals
which are included in their packaging.
1. Double click on the wireless icon on your computer and search for the
wireless network named OTE CONNX
10
3. Enter the network key that belongs to your wireless network. (the default
key is 1234567890123) You can later change this network key via the
wireless configuration menu. (see user manual on the CD Chapter 9 and
want to change the network key now and/or to
other) or, if you
change the password on devices login webpage, please go below to
chapter 5.
11
5. If you want to change the network key, and /or to change the password on
devices login webpage, launch your web browser (Internet Explorer 6.0
and above, or Netscape Navigator 7.0 and above), and type
http://192.168.1.1
6. Please enter user name (" admin " is the default), password (" 1234 " is
the default) and click " OK ".
12
13
14
z Ensure that air can circulate freely through the ventilation holes on
this unit. Allow at least 5~10 cm clearance around the unit.
z Never expose this unit to direct sunlight, naked flames or heat.
z Never place this unit on other electrical equipment.
zKeep away from this unit during lightning storms.
z Never remove the casing of this unit. Please leave all maintenance
work to qualified personnel.
z Keep this unit away from water, moisture and liquid filled objects.
Recycle Notice
Your product is designed and manufactured with high quality material and
components which can be recycled and reused. When this crossed-out
wheeled bin symbol is attached to a product, it means the product is covered
by the European Directive 2002/95/EC. Please inform yourself about the
local separate collection system for electrical and electronic products or
contact the supplier of this product for further information on their
environmental performances. Please act according to your local regulations
and do not dispose your old products with your normal household waste. The
correct disposal of your old product will help to prevent potential negative
consequences for the environment and human health.
15
16