Beruflich Dokumente
Kultur Dokumente
Page 1 of 35
Overview:
This site will introduce you to basic macro photography. Most of the images on this site were taken with a Canon
PowerShot S3. When accessory lenses are needed, I typically use either a Raynox DCR-250 or a Raynox MSN-202
close-up lens. I'll try to cover various lighting techniques. Some of the images you'll see have obvious mistakes. I'll
offer suggestions to keep you from making the same mistakes. Since this site is going to cover mainly basic macrophotography on a budget, I'll try to show you how to get the most of the on-board flash. This means that you'll see
lots of different home-made flash diffusers.
A few quick notes:
z
If you have questions about the operation of the lenses and/or cameras mentioned on this site, feel free to email me.
If you want to comment on the content that I currently have (all constructive comments welcomed), please email me.
I've used relatively large images on this site. If you're using a screen resolution of less than 1024x768, it will be very frustrating to use
this site. With the large, high resolution monitors becoming more available and more affordable, this site would quickly be unusable if I
designed it for use at low resolution. Also, I know how frustrating it is to have tiny images on photographic sites. If you are unable to
increase the screen resolution on your computer and are really interested in the information on this site, download the Opera browser
and set the display size (zoom) to 70%.
Much of the information here may seem obvious to those who are experienced photographers. This site is designed to help those who
are just getting started. It will show them the equipment and the photographic results (both good and bad) from using various
techniques.
The images of some of the spiders and such (must click links to see) may be disturbing for young children. The images are typically
very detailed.
When learning this type of photography, you will take bad photos. You may have to take 10, 20 maybe more to learn to photograph
certain types of objects. Don't give up. Too many people give up if they can't get it right the first or second try. That type of attitude
will prevent them from doing great things. With digital cameras, there is essentially no cost for bad photos. In time, you will get
better.
If you're using a screen resolution of 1024x768, you may want to use the F11 function to go to full screen mode. Hit the F11 button
again to return to normal mode.
Monitor Calibration
If your monitor is properly calibrated, you should be able to see a slight difference between adjacent blocks below. In
the second row, you should be able to read "Basic Macro Photography" in each block. If you have a good quality,
properly calibrated monitor, you should be able to read it in the third row also. You can use the controls on your
monitor as well the software supplied with your video card to make the adjustments. When making the adjustments,
try to get the left-most block absolutely black (not dark gray) and try to get the right-most block absolutely white (as
bright as it can be). Before you make any adjustments, I strongly recommend that you make notes of the current
settings. For those who are not computer savvy, it may be difficult to get back to your current configuration if you
don't know what they were.
Basic Equipment
Choosing the Best Setup
Flash Diffusers
Depth of Field
Monopod/Distance Gauge
Color Cast from Surroundings
Extended Exposure
Light Sources
Influence of Ambient Lighting
White Balance Failure
Proper Exposure
Compressed Gas Dusters
Further Softening the Flash
Close-Up Lens Comparison
Diffuser Comparison Shots
Other Styrofoam Diffusers
http://www.bmpt1.com/
12/8/2011
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
Page 2 of 35
Shooting Flowers
Photographing Clear Bottles
NEW - Photographing Wine Bottles
Photographing Coins
Basic Jewelry Photography
Miniature Clamshell Stage
Dark Images
Inexpensive Light Table Flash Units
Inexpensive Light Table Using CFLs
Shooting on a Glass Stage
Building a Mini-Studio
Photographing Electronic Equipment
Random Notes
NEW - Photographing Live Insects
Sample Images (mostly images of insects)
Basic Equipment:
In this tutorial, you will see equipment that can be purchased on a relatively small budget. If you have a budget that
will allow you to purchase top_of_the_line macro equipment with specialized flash devices, very little of this will
apply. Of course, you're welcome to visit but this is intended for beginners and those with a tight budget.
Generally, the camera is the most expensive piece of equipment. It's important to get a camera with a relatively
good lens, a good zoom factor (10-12x) and some way to attach accessory lenses to the camera. Most digital
cameras with a zoom lens don't allow you to attach close-up lenses directly to the lens so you must attach an
adapter to the body of the camera. On this camera, I use a LensMate adapter to attach the various close-up lenses
(browse the lens comparison images while on their site). They connect to the camera with a bayonet type connector
and the other end has either 52mm or 58mm threads for accessories. Even if you don't need accessory lenses, this
adapter will protect the fragile zoom lens assembly.
A note about super zoom cameras... Super zoom cameras (generally those with 10x or higher zoom) are not known
for super high quality images. As with anything, when you push technology to the limit, something is going to suffer.
There are always tradeoffs. For the non-pro photographer, the newer super zoom cameras produce sufficiently high
quality images for all but the most demanding situations. For macro photography, the zoom helps you make small
http://www.bmpt1.com/
12/8/2011
Page 3 of 35
objects larger. The close-up lenses allow you to focus closer, but without significant zoom, the image of small objects
may not be large enough to be useful.
In the adapters below, you should note that the interior of the barrel is black. If you buy an adapter with a silver
interior, you need to paint it black (flat black). I purchased a cheap silver adapter for my other camera and all of the
images that were taken in bright light with the adapter in place were washed out. After painting the interior black, it
was much better.
The photo below shows most of the lenses and adapters I'll be using in this tutorial. From left to right...
z
This is a Raynox DCR-250 mounted in a 58mm Lensmate adapter. Since the lens has 43mm threads, I had to
use step-down rings to make it fit. The Raynox-supplied clip in adapter worked well enough but I felt more
comfortable with a threaded mounting connection. This lens is suitable for relatively large subjects (~3.5"
maximum with the Canon S3). It can provide good resolution for items 1/4" (~6mm) or smaller.
The next piece is actually a cheap wide angle adapter (widely available on eBay). Many of these adapters are in
two pieces. The rear section of the lens can be used as a macro lens. I believe that these were originally
designed to be used with camcorders which have a much lower resolution than most digital cameras. For
camcorders, this lens may have worked well enough. For any sort of critical macro photography, the macro lens
is virtually useless. Of course, that's my opinion. I'll show the results with several lenses later (including this
one).
Just to the right of the camera, you can see a simple close-up lens. These typically come in sets that include +1,
+2 and +4 diopter lenses. These are relatively good for what they cost (~$30/set). This one is a +2 and it's the
most useful for the work I've done using this sort of lens. In a pinch, you can stack the lenses to get closer to
the subject (larger image in frame) but the minor problems that you encounter with a single lens are
compounded when multiple lenses are stacked.
The large assembly in the back is a 50mm lens attached to a Lensmate adapter using a macro coupler ring
(52mm male threads on both sides of the ring). The lens is reversed (relative to the way it's normally used).
This can work relatively well but sometimes it's difficult to get the lens' diaphragm to open fully. Since the lens
is so long and the working distance relatively short, it's difficult to get enough light (from the flash) on the
subject. This can be overcome by using a reflective type enclosure which will be covered later.
Last but certainly not least is the Raynox MSN-202 lens on another Lensmate adapter. This lens is suitable for
very small subjects. Something the size of a mosquito is near the maximum for this lens. It's great for very tiny
subjects (like the images of the mites and the diamond phonograph stylus found on this site).
http://www.bmpt1.com/
12/8/2011
Page 4 of 35
For someone just getting started in macro photography, I'd recommend the Raynox DCR-250. It's the best all-around
lens of those shown. If you find you want to photograph smaller items, the MSN-202 would be a great choice. If you
need to photograph relatively large items (up to ~2ft in length), the close-up diopter lenses can do a relatively good
job. They allow your camera to focus closer than they are able with no close-up lens. With all of the lenses, you can
use the camera's zoom to vary the amount of magnification.
Click to Return to the Main Menu
Choosing the Best Setup:
When you need to photograph an object, you must make a few decisions. These will determine the quality of the
photos. When experimenting, you need to take careful notes. This file will remind you to note the most basic
information. Use the 'click to print' button for best results.
Choosing the correct distance to the object is important. If possible, set the object at a distance that's approximately
in the middle of the range of focus for the camera/lens you have. With small objects, you may have a problem
getting the object large enough in the photo. For example, if your camera has only a 4x zoom and will not focus
closer than 10 feet, a relatively small object may be very tiny in the resulting photo. To make the object larger, you'll
have to get closer. Since the camera won't focus closer, you'll need accessory lenses. The diopter lenses or the
dedicated macro close-up lenses will allow you to get closer to the object which will make it larger in the photo.
Various lenses will be covered as you work your way through the site.
Lighting is very important. If you have only a basic point and shoot type camera that doesn't allow any manual
adjustments (shutter speed, flash power...), you'll have to try the various 'scene' settings to get the lighting right. It
is likely that you'll have to use a flash diffuser to prevent dumping too much light on the center of the object. I'll
cover many types of diffusers. To adjust the light levels, you can adjust the distance between the camera/flash and
the object, you can adjust the shutter time (when using long exposures) and you can change the aperture (fnumber) of the lens (smaller aperture, higher f-number = less light, darker image). All of this is easier if you use the
full manual mode (if that's available on your camera).
http://www.bmpt1.com/
12/8/2011
Page 5 of 35
You'll have to decide whether to use the flash or not. There's no way to determine which is best without trying both.
Some objects work better with long exposure times. Others work better with the flash (especially if your camera
employs noise reduction on all photos with long exposure time).
The background and work surface are also important. You don't want the object to get lost in the background. You
also want the colors of the background to work well with the object. Anything in the grayscale will generally be OK
for the background (assuming that the object is not mostly gray). Strong colors must be selected carefully.
Click to Return to the Main Menu
Flash Diffusers:
In the previous image, you may have noticed the plastic bag on the adapter. The flash on most cameras is designed
to illuminate subjects at a fair distance from the camera. When doing macro work, the flash is typically too bright.
Most cameras can reduce the flash power when they focus on close subjects but when the camera has a third-party
close-up lens on it, the camera may not compensate properly. The plastic bag contains poly-fil material. It serves to
diffuse the flash. It both reduces the light reaching the subject as well as spreading the light. There are many
different types of home-made diffusers. I'll show you several. In general, I'm not concerned about the appearance of
the camera or lenses. I use duct tape for all sorts of things (something I learned from Red Green :) from holding the
rubber port covers out of the way of the port (as you can see that I've done on my camera) to blocking light from the
diffuser (well placed strips of tape can reduce the output of the diffuser).
http://www.bmpt1.com/
12/8/2011
Page 6 of 35
If you want to look and sound more professional, use "gaffer's" tape instead of duct tape. It has the same basic
properties as duct tape except for the adhesive (which is not supposed to transfer onto the surface to which the tape
is applied). I purchased a roll manufactured by Shurtape and it works very well (strong and no sticky adhesive
residue).
A note about 'macro' photography... In the world of film cameras, the term macro applied to photos that produced a
life-size image on the film. Here I use the term a little more loosely.
The next 3 photos show how the flash functions with and without diffusers. All are with the camera set to super
macro (no close-up or accessory macro lens). I don't like the super macro function on this camera because there is
too much barrel distortion (a rectangular object would have a shape similar to an old wooden rain barrel). The first
image has no diffuser. Here I left the 58mm adapter in place. Normally, you would get some darkening of the bottom
of the image but not quite this bad. As you can see, where the flash hit, the image is blown out (bright areas
at/beyond the maximum the camera can process).
http://www.bmpt1.com/
12/8/2011
Page 7 of 35
Below, I used a 'bowl' diffuser. For this type of diffuser, you simply cut a hole in a styrofoam bowl so that it fits
snuggly onto the adapter or lens barrel. I press the back side of the adapter into the bowl to mark it. Cut it a little
smaller than needed and make a few relief cuts to allow it to slide on. This prevents it from turning. As you can see,
this is a cumbersome diffuser. If you need to get the camera close to a surface (to allow a low angle shot on a
subject), it's difficult to do with this diffuser.
http://www.bmpt1.com/
12/8/2011
Page 8 of 35
In this next image, I used a 'can' diffuser. The results were essentially the same as the bowl diffuser. The light is a
little less diffused and the shadows more intense but very good otherwise. This diffuser is probably a little better
overall because it more easily adjusted and more durable. When using something like the Raynox DCR-250, this
makes a good diffuser because it projects a more concentrated beam, a little farther than the bowl diffuser.
http://www.bmpt1.com/
12/8/2011
Page 9 of 35
For those who want to see the diffusers on the camera, your wait is over. You can change the light output of the bowl
type diffuser by rotating it (if you cut the hole off-center as I've done). You should experiment to see what works
best for you.
This shows a more durable version of the bowl diffuser. Sometimes, the relief cuts run making the diffuser fit too
loosely. Punching round holes (with a paper hole punch) distributes the force and helps to prevent tearing. If you
have trouble with light leaking through the holes (I haven't as of yet), use only relief cuts or use shorter relief cuts so
the holes are closer to the lens adapter. This also works. If/when the diffuser gets loose or if it tends to slip off of the
adapter tube, wrap rubber bands around the tube at the point where you want to diffuser to ride. Do not do this on a
retracting lens barrel. The rubber bands could cause damage to the lens mechanism.
http://www.bmpt1.com/
12/8/2011
Page 10 of 35
I can't take credit for the idea of the can type diffuser. I found something similar on a forum but I can't remember
where. The photographer had some sort of egg shaped end on the can. Here I used a plastic container from Crystal
Light Diet Lemonade. To make the diffuser, I cut the top out of an aluminum soda can and cut a slot in the back of
the can so that the camera's flash can fit into the can. Then I made some relief cuts in the Crystal Light container
and slid it over the can. There I fixed it in place with some duct tape (fancy, ain't it?). I hold it on the camera with a
rubber band. Not having it firmly affixed to the camera is handy because you can vary the light output by pushing
the can to the side (at an angle to the lens barrel).
http://www.bmpt1.com/
12/8/2011
Page 11 of 35
When/if you build one of these, you should use something to protect the camera's finish where the flash goes into
the can. I folded the edges of the can over but it wasn't enough. The padding in the center of the diffuser is folded
paper towels (I told you this was macro on a budget). You can use something better if you'd like.
http://www.bmpt1.com/
12/8/2011
Page 12 of 35
If you look at the bottom of the diffuser (top, as its oriented in the photo), you can see that it's open (open to light).
If the diffuser extends beyond the front of the lens, this can cause lens flare. Use some opaque tape to cover the
bottom of the diffuser. When you make tear-away pieces for this diffuser, fold the ends of the tape onto itself so it
can not stick to anything. It makes it easier to remove. The opening in the bottom of the diffuser can be handy for
some situations. The next two images were shot with the bottom of the diffuser open. This was done without any
accessory lenses. The camera was set to super macro. There was lens flare at the top of each photo but that part
was cropped.
http://www.bmpt1.com/
12/8/2011
http://www.bmpt1.com/
Page 13 of 35
12/8/2011
Page 14 of 35
The photos above were taken in relatively bright daylight conditions. They look as if they were taken at night
because a fast shutter speed and/or a small aperture was used.
Click to Return to the Main Menu
Depth of Field:
One of the most frustrating aspects of macro photography is the lack of 'depth of field'. The depth of field is the area
of the photo from far to near that's in sharp focus. At high magnification, the DOF is significantly reduced.
Sometimes it's better to use less magnification (simply don't zoom in as much) and then crop the image. This first
photo was taken at high magnification. The full frame is just what you see (the image was resized but not cropped).
As you can see, the #3 is in clear focus but little else is in focus. This would be OK if that's all you were interested in
but that's rarely the case.
This next image was taken with the same setup as the previous image but I zoomed out and cropped the resulting
image. As you can see, much more is in focus.
http://www.bmpt1.com/
12/8/2011
Page 15 of 35
To get more depth of field, you need to use a higher F-number setting. For most digital cameras, the highest
available F-stop is F8.0. When you increase the F value, you are shutting down the aperture in the lens of the
camera. This reduces the light hitting the image sensor. To get sufficient lighting, you must either use extended
shutter times or use a flash (or other source of light). If you're photographing a still subject, extended shutter times
are OK. If you're photographing something that's moving (even very slightly), then you need to use a flash to
prevent blurring.
http://www.bmpt1.com/
12/8/2011
Page 16 of 35
I shot the image above at F8. The image below was taken at F3.5. The only change I had to make was the flash
output. I had to almost completely cover the front of the can diffuser with tape to prevent blowing out the image. If
you look at the fuzzies along the top edge of the spool, you can see that fewer are in sharp focus in the image shot
at F3.5.
http://www.bmpt1.com/
12/8/2011
Page 17 of 35
In the next image, you can see the small poly-fil diffuser in three different positions. Each one produces different
results. The first produces the darkest image. Moving it to a vertical position, you get more light on the subject. In
the full forward position, the difference is subtle but sometimes you only need a subtle change to get the lighting just
right. Of course, intermediate positions cast varying amounts of light on the subject. This is a very flexible diffuser. I
use it more than any other.
Note: The image above is a Flash graphic file. You can right-click to zoom in. Use your left mouse button to navigate
when zoomed in.
http://www.bmpt1.com/
12/8/2011
http://www.bmpt1.com/
Page 18 of 35
12/8/2011
Page 19 of 35
If you look at the glare on the top of the plastic, the front of the metal housing and the lighting on the top of the tube
(in the images above and below), you can see differences due to the difference in the angle of the diffuser.
For those who want to see the stylus up close... click. That photo was taken with the Canon S3. If you're really on a
budget, you can still take nice macros. This photo is of the same subject but was taken with a camera (Olympus C740) that you can buy used for less than $100 on eBay. Both were taken with the MSN-202 lens mounted on
adapters made specifically for each camera.
A note about diffuser materials... Some materials will cause a color shift and produce inaccurate colors. To combat
this, you can use the manual white-balance to compensate. I'm not sure how many cameras allow white balance to
be used with the flash. My Olympus C-740 won't fire the flash when setting the white balance. This one (Canon S3)
will fire the flash to set the white balance.
Below, you can see the C-740 with the close-up lens. I use the same type of diffuser (bag of poly-fil) on this camera.
The wires go to a slave trigger that I use to fire a larger flash.
http://www.bmpt1.com/
12/8/2011
Page 20 of 35
Note:
The C-740 above (and likely it's close relatives) won't retain settings when it's switched off or when the batteries are
removed. This is generally due to a dead back-up battery for the memory. It's not available but I've replaced a
couple of them and the cameras work properly afterwards. Email me if you have similar problems with your C-740.
Click to Return to the Main Menu
Monopod/Distance Gauge:
When photographing small critters that are on the move, it's difficult to get the camera to focus (particularly at high
magnification) because it's difficult to find the small range in which the camera can focus. To make it easier to focus
quickly, I rigged the following monopod (of sorts). I set the camera to manual focus and set the focus in the middle
of its range. I then cut the rod to a length that would position the camera at that distance from the surface. When I
set the rod on the surface of a specimen (generally very small - less than 5mm), the camera can focus very quickly.
The tape is on the end to prevent slipping on hard smooth surfaces. The rubber band holds the rod in the hole I
drilled in the tripod shoe (this didn't affect the operation of the shoe). The rod fits loosely. This works well when you
need to fine-tune the area of focus without moving the rod on the surface. You can wedge your fingers between the
rod and the lens adapter barrel to stabilize the camera.
http://www.bmpt1.com/
12/8/2011
Page 21 of 35
Below, you can see a variation on the idea. I've clamped a small ruler between the camera body and the tripod shoe.
Notice that this is the MSN-202 lens which has relatively high magnification. I use it when photographing small
creatures. The fact that it's easily adjustable (loosen shoe and slide ruler) makes it easy to adjust to insects of
various heights. Remember, at high magnification, you have a very shallow depth of field and therefore, the working
distance is very critical. To photograph an individual that's only ~1mm high, you have to clamp the ruler in one
position. For those insects with long legs, you have to extend the ruler slightly so that the camera can focus on the
insect's body. Sometimes, if only a very slight adjustment is necessary, you can tilt the camera a little forward or
backward and get the proper distance to allow the camera to focus. With the solid rod shown above, stabilizing the
camera was only necessary 'sometimes'. With this flexible ruler, you MUST hold your fingers between the ruler and
the lens adapter barrel to stabilize the camera.
http://www.bmpt1.com/
12/8/2011
Page 22 of 35
Notes:
Both of the previous images are larger than shown here. Drag the image to the address bar of the browser to
see it full sized. You may have to tell the browser not to automatically resize the image.
The images above show you the approximate working distance for the Raynox DCR-250 and MSN-202 lenses on
this camera.
http://www.bmpt1.com/
12/8/2011
Page 23 of 35
Very Stable
http://www.bmpt1.com/
12/8/2011
Page 24 of 35
http://www.bmpt1.com/
12/8/2011
Page 25 of 35
The next photo may be considered to be under-exposed by some but it's salvageable if you want to lighten it slightly.
Looking at the watchband, you can see the texture of the surface of the band virtually throughout the image. The
face, while a bit dark, has pretty good detail. In this photo, you could selectively lighten the face and have a usable
photo. When the fine details are important, like the texture of the metal surface, you have to capture them in the
image. Brightness, contrast and sharpness can all be modified but if you don't capture the important fine details of
the object, there's little that you can do to recover them.
http://www.bmpt1.com/
12/8/2011
Page 26 of 35
The face of the watch below is better than those above but the band is somewhat blown out (some fine detail lost).
You can see the texture in very few areas. If you had an object like this to photograph and you couldn't get a single
perfect photo, you could use a program like Photoshop to combine the best parts of each.
While some may think this is the best image because it's the brightest, it's actually very bad. There are too many
blown out areas to consider this to be a good quality image.
http://www.bmpt1.com/
12/8/2011
Page 27 of 35
The following image has been "shop'd" (edited in Photoshop). I cut and pasted the face of #3 onto the band of #2.
This resulting image could be considered to be a relatively decent photograph. Of course, if this would have been
professionally done, there would be no reflections in the watch crystal as I have here. This is what the photo can look
like when a little more time is spend trying to get it perfect.
http://www.bmpt1.com/
12/8/2011
Page 28 of 35
vertical. If you tilt it, you may dispense liquid which can
damage the surface of the lenses or even injure
bystanders. The chemical used in most dusters can be
used as a refrigerant and is VERY cold as it boils off at
atmospheric pressure. If you're unsure how far you have
to tilt it to dispense liquid, aim the can in a safe direction
and begin spraying while increasing the angle of the can.
You should know that some of these products have
additives that deter their use as inhalants. It appears
that some of these additives are flammable. This is only
a danger when liquid is dispensed.
http://www.bmpt1.com/
12/8/2011
Page 29 of 35
As you can see, there is virtually no shadow around the objects. What little shadow you see is very soft.
http://www.bmpt1.com/
12/8/2011
Page 30 of 35
Comparing the image above to the one we showed you previously, you can see that the shadows are much less
significant. The diffuser alone does a good job but having the objects inside a reflective enclosure makes the photo
even better (if you define better as having fewer/softer shadows).
http://www.bmpt1.com/
12/8/2011
Page 31 of 35
Above I mentioned that there was at least one more way to reduce the shadows. Many professionals use a slave
flash mounted under the table on which they place their objects. The table is translucent so the flash fires through it.
Since the objects are lit from the bottom, there is virtually no chance that they'll have a shadow.
Click to Return to the Main Menu
Close-Up Lens Comparison:
This page shows the difference in the images from 4 different close up lenses. When you go to the individual pages,
the images will be large but only a fraction of their true size. Follow the instructions near the bottom of the page to
see them full size. When displayed actual size, you'll have to scroll to the center of the image.
For those who don't recognize this bit of ancient technology, the device is a magnetic phono cartridge. For a size
reference, the end of the tube in which the stylus is mounted is less than 0.024" wide (~0.6mm). I used it because I
knew that it had a small, precisely made stylus.
Click to Return to the Main Menu
Diffuser Comparison Shots:
This page shows you several images taken with a +4 diopter lens and either a can-type diffuser or a bowl-type
diffuser. I offer my opinion on the various images but you can decide for yourself which you think are the best.
Click to Return to the Main Menu
Other Styrofoam Diffusers:
This page shows different ways to use the bowl diffuser and a styrofoam cup as a diffuser. These and others can be
found on various sites on the internet. As always, you should experiment to see what works best for your equipment
and subject.
Click to Return to the Main Menu
Shooting Flowers:
Ok, I'll admit that I don't really like taking photos of flowers. It's too much like art. I'm much more interested in the
technical side of photography. To show you a few different results with flowers, I put together this page.
Click to Return to the Main Menu
Photographing Clear Bottles:
http://www.bmpt1.com/
12/8/2011
Page 32 of 35
http://www.bmpt1.com/
12/8/2011
Page 33 of 35
Random Notes
Image Stabilization:
Many cameras are equipped with image stabilization. In most all cases, the image stabilization is only to reduce
camera shake. At this point in time, I don't know of any IS systems that compensate for the movement of the
subject.
Focus Area:
When an auto-focus camera focuses for the photograph, it can use multi-point focus or spot focus. For the photos I
generally take, I use spot focusing. Multi-point focusing is generally for scenes where there is no central point of
focus (landscape vs portrait).
Manual Auto Focus:
http://www.bmpt1.com/
12/8/2011
Page 34 of 35
Many times, you'll try to focus on one particular point of an object but the auto focus continuously focuses on a
different part of the subject. For those instances, you can allow the camera to focus and then move the camera
forwards or backwards until the point of interest is in sharp focus. It may take a few wasted shots to get it right but
it does work.
Macro Focus Rack/Rail:
When working at very high magnification, depth of field is very thin and therefore, focus must precise to obtain the
photo you desire. For specialized macro work, you can use a focus rack. It mounts on a tripod (the camera mounts
on the rack) and allows very precise movement towards and away from the subject. Some even allow for lateral
adjustment.
Heat Produced by Flash:
It's important that you never allow anything to be in contact with the lens of the flash when it fires. From my
experience, it's possible to permanently scar the lens as the contaminant burns (when the flash fires).
Rechargeable Batteries:
I haven't yet added any information about rechargeable batteries to this site but the Basic Flashlight Tutorial page
(you'll have to see the page to understand why it exists) on one of my other sites has information regarding batteries
and chargers. The information there may help you avoid costly mistakes.
Chromatic Aberration:
Chromatic Aberration is seen as colored fringing in an image. It typically occurs near the corners of the image and is
most obvious where light objects meet dark objects. If you visited the section of the site where I displayed the
sample images from various lenses, you should remember that one lens had particularly poor focus. The same lens is
also plagued with CA. This is the thumbnail from the photo. Even in this small image you can see the problem
clearly. This is what it should look like.
NEW!
Photographing Live Insects:
This page may help you if you're trying to photograph insects in a controlled environment. This is a work in progress
so if you care to provide feedback, please email me.
Sample Images
Amphibians and Reptiles
Aphids
Milkweed Assassin Bugs
Fire Ants
Flies
Mosquitos
Aedes Vexans - Female
Aedes Vexans - Female - Gravid
Aedes Vexans - Male
Ochlerotatus Infirmatus - Female
Culex Quinquefasciatus - Male
Culex Quinquefasciatus - Female
Psorophora Howardii - Female
Psorophora Ciliata - Female
Harvestmen (daddy long legs)
Green and Brown Lacewings (adults and larvae)
Leaf-Footed Bugs
Millipedes
Mites
Moths
Spiders
Garden Spiders
Jumping Spiders
Golden Silk Orb Weaver (Banana Spider)
Ghost Spiders 1
Ghost Spiders 2
Lynx Spiders
Sheet-web Weavers
http://www.bmpt1.com/
12/8/2011
Page 35 of 35
Hacklemesh Weavers
Wolf Spiders
Springtails
Stink Bugs
NEW - Yellow Jackets
Old Web Site #1
Old Web Site #2
Click to Return to the Main Menu
Notes:
z
I am not a professional entomologist/arachnologist. If there are mistakes in the identification of any individual
or in the information provided, I would greatly appreciate it if you would email me to let me know what is
incorrect.
I'm not a professional photographer. If you have suggestions that will help me to improve this site, please
email me.
You are free to use the images on this site for non-profit, educational purposes. If you want to use them for
commercial projects, please contact me.
Virtually all identification of the individuals on this site were obtained from the BugGuide.net site. It's a great
site that's maintained and staffed by volunteers. They do a great job.
Watch Nikon HD Videos Experience The Brilliance of Digital Photography With Nikon! hd.nikon-asia.com
Photography Stock Get Printable Coupon Discounts For Stuff To Do & Eat In Hongkong! www.GROUPON.hk/Hongkong
Green Screen Software Easily replace backgrounds! Chromakey software - Download now www.TubeTape.net
http://www.bmpt1.com/
12/8/2011