Beruflich Dokumente
Kultur Dokumente
General
EN
ISO
General,
welds
EN ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
General,
aerospace
General,
terminology
EN
ISO
EN ISO 6520-2:2013 Welding and allied processes Classification of geometric imperfections in metallic materials Part 2: Welding with pressure
EN 2078:2001 Aerospace series - Metallic materials Manufacturing schedule, inspection schedule, inspection and test
report - Definition, general principles, preparation and approval
EN 1330-1:1998 2014 Non-destructive testing - Terminology Part 1: List of general terms
EN 1330-2:1998 Non-destructive testing - Terminology - Part 2:
Terms common to the non-destructive testing methods
2. Acoustic emission ()
EN
General
provisions
ISO
Equipment and
tools
EN
ISO
Equipment and
tools
Special
technique
EN
ISO
EN
ISO
Aerospace
Welds
(w)
Terminology
General
provisions
ISO
EN ISO 9934-1:2001/A1:2003 2015 Non-destructive testing Magnetic particle testing - Part 1: General principles
EN
Special
technique
Equipment and
tools
ISO
Castings
Forgings
f
Welds
(w)
Tubes and
pipes
(t)
Terminology
EN ISO 23278:2009 2015 Non-destructive testing of welds Magnetic particle testing of welds - Acceptance levels
5. Penetrant testing ()
General
provisions
Special
technique
EN
ISO
EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing Part 5: Penetrant testing at temperatures higher than 50 degrees C
EN
Part 6: Penetrant testing at temperatures lower than 10 degrees C
ISO
Penetrant testing at temperatures lower than 10 degrees C
Equipment and
tools
EN ISO 3452-2:2013 Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials
EN ISO 3452-3:2013 Non-destructive testing - Penetrant testing Part 3: Reference test blocks
Forgings
f
Welds
(w)
EN ISO 23277:2009 2015 Non-destructive testing of welds Penetrant testing of welds - Acceptance levels
Tubes and
pipes
(t)
Terminology
General
provisions
Equipment and
tools
EN
ISO
EN 13068-3:2001 Non-destructive testing - Radioscopic testing Part 3: General principles of radioscopic testing of metallic
materials by X- and gamma rays
EN ISO 11699-1:2011 Non-destructive testing - Industrial
radiographic film - Part 1: Classification of film systems for industrial
radiography
EN
ISO
Image quality
Special
technique
EN
ISO
Aerospace
Castings
Welds
(w)
EN ISO 17636-2:2013 Non-destructive testing of welds Radiographic testing - Part 2: X- and gamma-ray techniques with
digital detectors
EN ISO 10675-1:2013 Non-destructive testing of welds Acceptance levels for radiographic testing - Part 1: Steel, nickel,
titanium and their alloys
prEN ISO 10675-1 rev Under Approval
EN ISO 10675-2:2013 Non-destructive testing of welds Acceptance levels for radiographic testing - Part 2: Aluminium and
its alloys
Terminology
EN
ISO
ISO
ISOEN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - ISO 16810:2012 Non-destructive testing - Ultrasonic testing General principles
General principles
General
provisions
EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - ISO 16823:2012 Non-destructive testing - Ultrasonic testing Transmission technique
Transmission technique
ISO 10375:1997 Non-destructive testing -- Ultrasonic inspection -Characterization of search unit and sound field
EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - ISO 2400:2012 Non-destructive testing - Ultrasonic testing Specification for calibration block No. 1
Specification for calibration block No. 1
EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - ISO 7963:2006 Non-destructive testing - Ultrasonic testing Specification for calibration block No. 2
Specification for calibration block No. 2
EN 12668-1:2010 Non-destructive testing - Characterization and
verification of ultrasonic examination equipment - Part 1: Instruments
10
EN
ISO
ISO 12715:2014 Non-destructive testing -- Ultrasonic testing -Reference blocks and test procedures for the characterization of
contact probe sound beams
EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic ISO 10863:2011 Non-destructive testing of welds -- Ultrasonic testing
testing - Use of time-of-flight diffraction technique (TOFD)
-- Use of time-of-flight diffraction technique (TOFD)
EN ISO 15626:2013 Non-destructive testing of welds - Time-of-flight ISO 15626:2011 Non-destructive testing of welds -- Time-of-flight
diffraction technique (TOFD) - Acceptance levels
diffraction technique (TOFD) -- Acceptance levels
EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic ISO 13588:2012 Non-destructive testing of welds -- Ultrasonic testing
testing - Use of automated phased array technology
-- Use of automated phased array technology
11
EN
ISO
Castings
EN 12680-2:2003 Founding - Ultrasonic examination - Part 2: Steel ISO 4992-2:2006 Steel castings - Ultrasonic examination - Part 2:
castings for highly stressed components
Steel castings for highly stressed components
EN 12680-3:2011 Founding - Ultrasonic testing - Part 3: Spheroidal
graphite cast iron castings
EN 10228-3:1998 Non-destructive testing of steel forgings - Part 3:
Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-3:2015 Approved
Forgings
f
Welds
(w)
12
EN
ISO
EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing
testing - Testing of welds in austenitic steels and nickel-based alloys - Testing of welds in austenitic steels and nickel-based alloys
prEN ISO 22825 rev Under Drafting
EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic
ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing
testing - Characterization of indications in welds
- Characterization of indications in welds
prEN ISO 23279 rev Under Drafting
EN ISO 11666:2010 Non-destructive testing of welds - Ultrasonic
ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing
testing - Acceptance levels
- Acceptance levels
prEN ISO 11666 rev Under Drafting
EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8:
Automated ultrasonic testing of seamless and welded steel tubes for Automated ultrasonic testing of seamless and welded steel tubes for
the detection of laminar imperfections
the detection of laminar imperfections
EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9:
Automated ultrasonic testing for the detection of laminar
imperfections in strip/plate used for the manufacture of welded steel
tubes
EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11:
11: Automated ultrasonic testing of the weld seam of welded steel Automated ultrasonic testing of the weld seam of welded steel tubes
tubes for the detection of longitudinal and/or transverse for the detection of longitudinal and/or transverse imperfections
imperfections
EN ISO 10893-12:2011 Non-destructive testing of steel tubes - Part ISO 10893-12:2011 Non-destructive testing of steel tubes - Part 12:
12: Automated full peripheral ultrasonic thickness testing of Automated full peripheral ultrasonic thickness testing of seamless
seamless and welded (except submerged arc-welded) steel tubes
and welded (except submerged arc-welded) steel tubes
ISO 10332:2010 Non-destructive testing of steel tubes - Automated
ultrasonic testing of seamless and welded (except submerged arcwelded) steel tubes for verification of hydraulic leak-tightness
13
EN
ISO
Wrought
products
(wp)
Terminology
EN 16018:2011 Non-destructive testing - Terminology - Terms used
in ultrasonic testing with phased arrays
ISO
Equipment and
tools
EN ISO 13385-1:2011 Geometrical product specifications (GPS) Dimensional measuring equipment - Part 1: Callipers; Design and
metrological characteristics
ISO 13385-1:2011 Geometrical product specifications (GPS) Dimensional measuring equipment - Part 1: Callipers; Design and
metrological characteristics
EN ISO 13385-2:2011 Geometrical product specifications (GPS) Dimensional measuring equipment - Part 2: Calliper depth gauges;
Design and metrological characteristics
ISO 13385-2:2011 Geometrical product specifications (GPS) Dimensional measuring equipment - Part 2: Calliper depth gauges;
Design and metrological characteristics
ISO 3058:1998 Non-destructive testing - Aids to visual inspection Selection of low-power magnifiers
Castings
14
EN
ISO
ISO 19959:2005 Visual examination of the surface condition of
investment castings - Steel, nickel alloys and cobalt alloys
Welds
(w)
Wrought
products
(wp)
Terminology
EN ISO 8785:1999 Geometrical product specification (GPS) Surface imperfections - Terms, definitions and parameters
Equipment and
tools
ISO
EN 1779:1999/A1:2003 Non-destructive testing - Leak testing Criteria for method and technique selection
EN 13192:2001/AC:2003 Non-destructive testing - Leak testing Calibration of reference leaks for gases
EN 13625:2001 Non-destructive testing - Leak test - Guide to the
selection of instrumentation for the measurement of gas leakage
15
EN
EN 1518:1998 Non-destructive testing - Leak
Characterization of mass spectrometer leak detectors
ISO
testing
Techniques
Terminology
16