Beruflich Dokumente
Kultur Dokumente
The agent is pre-loaded and is ready to be installed onto this computer. By pre-loading
the agent software the amount of time and resources required to add this computer into an
HP Management environment is reduced. Once installed, it can be easily configured to
communicate with the management server to provide the management capabilities listed
above. Before installation, you will need to obtain information from the administrators of
the HP Management infrastructure, including:
Name or address of the HP Management Portal or HP Client Automation Standard
Edition server
Ports 3466 and 3463 must be open at the client and all firewalls between the client
and the server.
The HPCA-RMA.msi will install and regsiter the rma. Installing with
the full UI will allow the user to configure the Host name and Port.
To install the msi silently, the standard /qb or /qn command
paramters for the msiexec can be used as follows:
msiexec /i HPCA-RMA.msi /qb HOST_IP=<hostname> HOST_PORT=<host port>
The HOST_IP and HOST_PORT are optional in the command line and
default to hpcaserver and 3466 respectively.
The install requires elevated priveleges - for Vista, Win2008 and
Win7, the install has to be launched with elevated privileges to
avoid the UAc prompt.
Lagente precaricato e pronto per essere installato nel computer. Il precaricamento del
software riduce il tempo e le risorse necessari per inserire il computer in un ambiente di
gestione HP. Una volta installato, il software pu essere facilmente configurato per
comunicare con il server di gestione e consentire le funzioni di gestione sopra indicate.
Prima dellinstallazione si devono ottenere alcune informazioni dagli amministratori
dellinfrastruttura HP Management, tra cui:
Nome o indirizzo dei server HP Management Portal o HP Client Automation
Standard Edition
Numeri corretti delle porte TCP/IP per comunicare con i server
Eventuali modifiche firewall per il computer per consentire la comunicazione con
il server
importante ricordare che le porte 3466 e 3463 devono essere aperte a livello client e in
tutti i firewall tra il client e il server.
HP Client Automation Agent Readme
Pre-Loaded Management Agent for
HP Client Automation Starter Edition
HP Client Automation Standard Edition
HP Client Automation Enterprise Edition
Hewlett-Packard provides pre-loaded with this computer the agent software for HP Client
Automation. This agent enables this computer to become a managed node in established
environments for these solutions.
HP Client Automation Enterprise Edition provides extensive management capabilities
including:
The agent is pre-loaded and is ready to be installed onto this computer. By pre-loading
the agent software the amount of time and resources required to add this computer into an
HP Management environment is reduced. Once installed, it can be easily configured to
communicate with the management server to provide the management capabilities listed
above. Before installation, you will need to obtain information from the administrators of
the HP Management infrastructure, including:
Name or address of the HP Management Portal or HP Client Automation Standard
Edition server
The appropriate TCP/IP port numbers to communicate with these servers
Any firewall changes for your computer to allow communication to the server
Ports 3466 and 3463 must be open at the client and all firewalls between the client
and the server.
HP Client Automation Agent Readme
Microsoft
[HP Management]
[HP
Management]
[HP Management Portal][HP Client Automation Standard Edition]
TCP/IP
3466 3463
Collecte des donnes dinventaire du parc matriel et logiciel sur des platesformes htrognes
Prparation dun package dapplications et analyse dimpact avant la distribution.
Dploiement et maintenance des logiciels et du contenu en ciblant les ordinateurs
individuels, les groupes de travail ou lensemble des ordinateurs en fonction de
stratgies.
Mise disposition et supervision des systmes dexploitation, des applications et
du contenu des ordinateurs distants partir de nimporte quel endroit
Intgration dans lassistance HP Software Service Center ainsi que dans dautres
systmes et outils d'assistance et de gestion
Exploitation dune infrastructure commune pour la gestion des logiciels et du
contenu sur pratiquement tout type de priphrique, plate-forme et rseau, et ce
pour tous les utilisateurs de lentreprise.
Lagent est prcharg et prt linstallation sur cet ordinateur. Cela permet de rduire le
temps et les ressources ncessaires pour ajouter cet ordinateur dans un environnement de
supervision HP. Une fois install, lagent peut tre facilement configur de manire
communiquer avec le serveur de supervision et fournir les fonctionnalits de supervision
indiques plus haut. Avant installation, vous devrez demander des informations aux
administrateurs de linfrastructure de supervision HP, notamment :
Prenez note que les ports 3466 et 3463 doivent tre ouverts au niveau de lordinateur
client et de tous les pare-feu entre lordinateur client et le serveur.
Fichero Readme (Lame) de HP Client Automation Agent
Management Agent ya cargado para
HP Client Automation Starter Edition
HP Client Automation Standard Edition
HP Client Automation Enterprise Edition
Hewlett-Packard le ofrece ya cargado en este equipo el software de agente para HP Client
Automation. Este agente permite que su equipo se convierta en un nodo gestionado en
entornos establecidos para dichas soluciones.
HP Client Automation Enterprise Edition ofrece amplias capacidades de gestin, entre las
que se incluyen:
El agente ya est cargado y listo para ser instalado en este equipo. Al cargar previamente
el software de agente, el tiempo y los recursos necesarios para agregar este equipo a un
entorno de HP Management son reducidos. Una vez instalado, puede configurarse
fcilmente para comunicarse con el servidor de gestin y de este modo proporcionar las
capacidades de gestin enumeradas anteriormente. Antes de la instalacin, deber
obtener informacin de los administradores de la infraestructura de gestin de HP,
incluida la siguiente:
Nombre o direccin del portal de gestin de HP o del servidor de HP Client
Automation Standard Edition
Los nmeros de puerto TCP/IP adecuados para comunicarse con dichos servidores
Cualquier cambio de firewall para permitir que su equipo se comunique con el
servidor
HP Client Automation Agent puede ser instalado por el usuario a nivel local en el equipo,
o bien ser instalado de forma remota por parte del administrador de TI, a travs de un
comando de inicio de sesin. En ambos casos, la lnea de comandos para la instalacin
del agente es
Tenga en cuenta que los puertos 3466 y 3463 debern estar abiertos en el cliente y en
todos los firewall entre el cliente y el servidor.
Readme zum HP Client Automation Agent
Vorinstallierter Management Agent fr
HP Client Automation Starter Edition
HP Client Automation Standard Edition
HP Client Automation Enterprise Edition
Auf diesem Computer ist die Agent-Software fr HP Client Automation bereits von
Hewlett-Packard vorinstalliert. Die Agent-Software ermglicht in fr diese Lsungen
eingerichteten Umgebungen die Verwaltung des Computers.
HP Client Automation Enterprise Edition stellt umfangreiche Management-Funktionen
zur Verfgung. Dazu zhlen:
HP Client Automation Enterprise Edition ist eine uerst skalierbare, auf Richtlinien
basierende Change-Management- und Configuration-Management-Software, mit der
Administratoren Software und Inhalte auf heterogenen Desktop-Plattformen mithilfe
einer webbasierten Konsole effizient und zuverlssig bestandsmig erfassen,
bereitstellen und verwalten knnen.
HP Client Automation Standard Edition stellt die folgenden Configuration-ManagementFunktionen fr Windows PCs bereit:
Der Agent ist bereits vorinstalliert und kann jederzeit auf diesem Computer installiert
werden. Dadurch verringert sich der Zeit- und Ressourcenaufwand, der fr das
Hinzufgen dieses Computers zu einer HP Management-Umgebung bentigt wird. Der
Agent ist nach der Installation leicht zu konfigurieren, sodass er mit dem ManagementServer kommunizieren und die oben aufgefhrten Management-Funktionen bereitstellen
kann. Vor der Installation bentigen Sie jedoch von den Administratoren Informationen
zur HP Management-Infrastruktur, wie beispielsweise:
Name oder Adresse des HP Management-Portals oder des HP Client Automation
Standard Edition Servers
Die entsprechenden TCP/IP-Port-Nummern fr die Kommunikation mit diesen
Servern
nderungen an der Firewall, damit der Computer eine Kommunikation mit dem
Server herstellen kann
Beachten Sie, dass die Ports 3466 und 3463 auf dem Client und auf allen Firewalls
zwischen Client und Server offen sein mssen.
RAR version 3.93 - Technical information
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
marker block
archive header
file header
old style comment header
old style authenticity information
HEAD_TYPE=0x77
HEAD_TYPE=0x78
HEAD_TYPE=0x79
HEAD_TYPE=0x7a
Comment block is actually used only within other blocks and doesn't
exist separately.
Archive processing is made in the following manner:
1. Read and check marker block
2. Read archive header
3. Read or skip HEAD_SIZE-sizeof(MAIN_HEAD) bytes
4. If end of archive encountered then terminate archive processing,
else read 7 bytes into fields HEAD_CRC, HEAD_TYPE, HEAD_FLAGS,
HEAD_SIZE.
5. Check HEAD_TYPE.
if HEAD_TYPE==0x74
read file header ( first 7 bytes already read )
read or skip HEAD_SIZE-sizeof(FILE_HEAD) bytes
if (HEAD_FLAGS & 0x100)
read or skip HIGH_PACK_SIZE*0x100000000+PACK_SIZE bytes
else
read or skip PACK_SIZE bytes
else
read corresponding HEAD_TYPE block:
read HEAD_SIZE-7 bytes
if (HEAD_FLAGS & 0x8000)
read ADD_SIZE bytes
6. go to 4.
============================================================
==============
Block Formats
============================================================
==============
Marker block ( MARK_HEAD )
HEAD_CRC
2 bytes
Always 0x6152
HEAD_TYPE
1 byte
HEAD_FLAGS
2 bytes
HEAD_SIZE
2 bytes
HEAD_TYPE
1 byte
HEAD_FLAGS
Bit flags:
2 bytes
0x0001 - Volume attribute (archive volume)
0x0002 - Archive comment present
RAR 3.x uses the separate comment block
and does not set this flag.
0x0004 - Archive lock attribute
0x0008 - Solid attribute (solid archive)
0x0010 - New volume naming scheme ('volname.partN.rar')
0x0020 - Authenticity information present
RAR 3.x does not set this flag.
0x0040 - Recovery record present
0x0080 - Block headers are encrypted
0x0100 - First volume (set only by RAR 3.0 and later)
other bits in HEAD_FLAGS are reserved for
internal use
HEAD_SIZE
2 bytes
RESERVED1
2 bytes
Reserved
RESERVED2
4 bytes
Reserved
HEAD_FLAGS
Bit flags:
2 bytes
0x01 - file continued from previous volume
0x02 - file continued in next volume
0x04 - file encrypted with password
0x08 - file comment present
RAR 3.x uses the separate comment block
and does not set this flag.
0x10 - information from previous files is used (solid flag)
(for RAR 2.0 and later)
bits 7 6 5 (for RAR 2.0 and later)
000
001
010
011
100
101
110
111
- dictionary size 64 KB
- dictionary size 128 KB
- dictionary size 256 KB
- dictionary size 512 KB
- dictionary size 1024 KB
- dictionary size 2048 KB
- dictionary size 4096 KB
- file is directory
PACK_SIZE
4 bytes
UNP_SIZE
4 bytes
HOST_OS
1 byte
FILE_CRC
4 bytes
FTIME
4 bytes
UNP_VER
RAR version needed to extract file
1 byte
Version number is encoded as
10 * Major version + minor version.
METHOD
Packing method
1 byte
0x30 - storing
0x31 - fastest compression
0x32 - fast compression
0x33 - normal compression
0x34 - good compression
0x35 - best compression
NAME_SIZE
2 bytes
ATTR
4 bytes
File attributes
============================================================
==============
Application notes
============================================================
==============
1. To process an SFX archive you need to skip the SFX module searching
for the marker block in the archive. There is no marker block sequence (0x52
0x61 0x72 0x21 0x1a 0x07 0x00) in the SFX module itself.
2. The CRC is calculated using the standard polynomial 0xEDB88320. In
case the size of the CRC is less than 4 bytes, only the low order bytes
are used.