Beruflich Dokumente
Kultur Dokumente
Our Reference
Your Reference
Subject
Model BT150E
Electric Bow Thruster System
We remain at your service, and are
Yours faithfully,
Bert de Wijs
Manager Director
Page 2 of 5
Proposal
RP16102-01
Each (1) Model BT150E Electric Podded Bow Thruster System rated at
160 Kw, delivering nominal 2440 kg-f Thrust. The Electric Pod thruster
is complete with electric drive and Vfdcontroller (400Vac, 50/3) one (1)
full bridge control panel and one (1) RemoteControl Station.
Each Electric Podded Bow Thruster system will be complete as required and includes the following
equipment.
One (1) Model BT150E Electric Podrated at 160 kW, delivering 2440 kg-f of thrust and
consisting of the following.
1
One (1) Fixed Pitch Electric Pod Assembly, mounted in a tunnel section (steel) for
direct mounting to the vessels structure, the Electric Pod incorporates a brush-less ac
electric motor, designed as an integrated part of the pod housing, mounted directly to
the thruster drive shaft, includes radial/thrust bearings and mechanical seal assembly.
One (1) 1500mm length steel tunnel section for transverse mounting into the ships
structure, 966.0 mm O.D. diameter with 12.0 mm wall.
Page 3 of 5
The Electric Pod thrusters are designed to be installed in the fore or aft body of the vessel. The Thruster
gear unit(s) shall be housed in a motor case made of high strength material with sea water resistant
protection against corrosion. The fixed pitch propeller is fitted to a standard tapered stainless steel
shaft.
2.0 Accessories
The Electric Pod Thruster System is provided with the following
One (1) Electric Brushless Motor, incorporated as part of the thruster hub.
Gear Unit (Thruster Pod + Propeller)
Tunnel Section (length as quoted extra length optional).
One (1) Proportional VFD Motor Starter/Controller system
Control Panel for (1) Main Bridge Fwd. Panel + (1) Remote Station
Installation material (such as nuts, bolts, washers etc.)
Cable Glands for Electrical Enclosures
Model
Unit Cost
Total Cost
Rp 1.250.000.000,--
Rp 2.100.000.000,--
The above quoted items are packed, Ex Works (Batam) but does not include any sales or import taxes
that might be required at destination.
Page 4 of 5
The above quoted items are packed and delivered Ex Works our facility (Batam-Indonesia) but does not
include any sales or import taxes that might be required at destination.
Delivery: 5 months after receipt of your purchase order and any approved drawing requirements
Included in the price as above:
1
2
5.0 Commissioning Charges Please note for Batam Shipyards no Day Rates are
charged to the shipyard/customer.
We estimate that a total of 3 days are required for each shipset. (max 10h/day) Price per day, travel
expenses, board and stay are not included in our proposal.
Shipyard Required/Labor Rates - Field Service Equipment rework, customer changes, or
troubleshooting of customer equipment necessary to finalize start-up of the equipment, will be charged
under the standard rates and terms.
Field rates and charges are not and do not include taxes and surcharges which may be applicable in
locations where fieldwork is performed.
Rate Schedule
Classification
All the hours worked over the normal schedule work period will be at 1.4 times the hourly base rate. All
hours worked on the seventh day, and holidays, will be at 1.8 times the hourly base rate
Page 5 of 5
7.0 Guarantee
The items covered in this proposal and specification shall be guaranteed against defect/damages due
to faulty design, poor workmanship and material for a period of 12 months from date of ship delivery
from citra shipyard to end client service or 18 months from date of pt risea shipment.
8.0 Documentation
The following documents, drawings and data shall be supplied in two (2) fold as part of any issued
contract.
8.1
8.2
8.3
8.4
8.5
9.0Required Payments
9.1 Payment Terms
9.1.1
9.1.2
9.1.3
9.2. Insurance
9.3. Packing &
Forwarding
9.3.1
Yours faithfully,
PT. RiSEA Propulsion Indonesia
Bert de Wijs
Managing Director