Beruflich Dokumente
Kultur Dokumente
Technical Specifications
June 3, 2008
Technical specifications
Technical specifications
Technical specifications include storage-system power requirements,
size, drive, environment, and standards.
AC power requirements
The input current, power (CVA), and dissipation per storage system
listed in this document are based on the maximum capability of the
power supplies and cooling system to provide internal regulated
power. Typical values will be less, depending on the number of disk
modules. These values represent the values for a single power supply
line cord.
Any cabinet you use for mounting storage systems must have AC
power distribution. The main branch AC distribution must be able to
handle the requirements for all systems connected to it.
Table 1
AC line voltage
AC line current
Power consumption
Power factor
Heat dissipation
In-rush current
AC protection
Technical specifications
Table 1
AC inlet type
IEC320-C14
Ride-through time
30 ms min
Current sharing
N/A
Drive type
Specifications
Height
Width
Depth
Weight
Technical specifications
Cables
Table 3
Copper cabling
Type
Length
2 meters (6.6 feet); 3 meters (9.8 feet), and 4 meters (13.1 feet)
Connectors
Operating limits
Operating limits
The site must have air conditioning of the correct size and placement
to maintain the specified ambient temperature range and offset the
heat dissipation of the disk enclosures.
Table 4
Temperature ranges
Requirement
Description
Ambient temperature
Temperature gradient
10oC/hr (18oF/hr)
Relative humidity
Elevation
7,500 ft (2,287 m)
Environmental recovery
If the storage systems amient temperature exceeds the maximum by
10oC /18oF, the system will power down.
If the system detects that the temperature has dropped to an
acceptable level, it will restore power.
Table 5
Description
Ambient temperature
Temperature gradient
25oC/hr (45oF/hr)
Relative humidity
Elevation
Operating limits
EMC believes the information in this publication is accurate as of its publication date. The
information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED AS IS. EMC CORPORATION
MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE
INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an
applicable software license.
For the most up-to-date listing of EMC product names, see EMC Corporation Trademarks on
EMC.com.
All other trademarks used herein are the property of their respective owners.