Beruflich Dokumente
Kultur Dokumente
Outline Specifications
OUTLINE SPECIFICATIONS
DIVISION 1 GENERAL REQUIREMENTS
General. It is declared and acknowledged intention and meaning to provide and secure the
Interior Fit-Out of the Philippine Department of Tourism Showroom located at
Philippine Center 565, 5th Avenue, New York City, NY 10036, USA, complete and
ready for use. The showroom shall have refurbishing works for architectural, electrical,
electronics and communications provisions.
1.1
Permit Requirements
1.2
Temporary Facilities
ArceBailonArce Architects
OS - 1
4.2
Outline Specifications
Stone Finishes
4.2.1
DIVISION 5 METALS
5.1
5.2
Metals
5.1.1
5.1.2
5.1.3
Decorative Metal
5.2.1 Stainless Steel Baseboard Cover for Reception Information Counter
Shall be 1.2mm thick, gauge 18 stainless steel plate in
hairline finish, see drawings and layout for location,
submit sample for Architects approval. (See Division 6
for complete requirements of Reception and
Information Counter)
ArceBailonArce Architects
OS - 2
Outline Specifications
Information Counter
Note: See Architectural drawings for layout and detail; submit shop
drawings for Architects approval. Dimension, fabrication and
installation of information counter shall be based on the actual
measurements and conditions of the site. For hardware and
accessories see Division 8.3 Builders Hardware.
6.1.1.1 Counter Wall Design (front wall)
Shall be 50mm x 50m treated kiln dried (TKD) flexible
solid hardwood in varnish/stain finish with 5mm thick
ribbon grain plyboard (Class A) backing on solid wood
framing. Submit sample varnish finish and sample
swatches for Architects approval.
6.1.1.2 Countertop and Counter Desk
Shall be 12mm thick non-porous Solid Surface made of
high performance acrylic resin, abrasion, chemical, fire,
bacteria and fungi resistant. Color and design as per
Architects approved sample.
6.1.1.3 Counter Sidings and Back Walls
Shall be 25mm thick ribbon grained plyboard Class A in
stain/varnish finish. Submit stain/varnish color sample
for Architects approval.
6.1.1.4 Counter Cabinet Shelves, Carcass and Drawers
Shall be 18mm thick double-faced, high compact
machine pressed, thermo-fused, heat and scratch
resistant melamine laminated Medium Density
Fiberboard (MDF) with pvc edge bond. Submit color
swatches and sample with edge bond for Architects
approval.
6.1.1.5 Counter Framing System and Backboards and Supports
Shall be 25mm x 50mm, 50mm x 50mm and 50mm x
100mm TKD treated and Kiln Dried (KD) Tanguile wood
framing, backing shall be 5mm thick ribbon grained
plyboard. Color and finish as per Architects approved
sample. Provide 6mm x 38mm x 38mm angle bar
support for ledge design framing.
6.1.1.6 Nails, Common and Finishing
Shall conform to the best commercial standard. Size
and type, best suited for the purpose indicated.
DIVISION 7 THERMAL AND MOISTURE PROTECTION
7.1
Structural Sealant
Shall be Dow Corning 795 and DC 995 Silicone building
sealant or approved equal, which is a one-part, high
ArceBailonArce Architects
OS - 3
Outline Specifications
Sliding Glass Doors with Fixed Panels (See Schedule of Doors for
Design Details)
Interior Glass Wall Partitions (See Schedule of Glass Wall Partitions for
Design Details)
Hardware
8.3.1
ArceBailonArce Architects
OS - 4
8.3.2
Outline Specifications
8.3.3
8.3.4
8.4
8.4.2
ArceBailonArce Architects
OS - 5
Outline Specifications
Glazing Sealant
Shall be one component, neutral cure, high tensilestrength elastomeric silicone sealant and adhesive for
structural bonding glass, metal and building
components
8.4.4
Norton Tape
Shall be shall be 6mm thick x 13mm x 50 LF Norton
Thermal Bond high density structural glazing space
tape double sided adhesive.
8.4.5
Frosted Sticker Film Strips (For Interior Glass Walls and Doors)
Shall be a translucent 2 mil vinyl film with pressuresensitive adhesive and synthetic liner that resist water,
durable and sand blast appearance in white frosted
sticker film finish; see drawings for layout and details
8.4.6
8.4
Note:
All samples of doors and fixed panels materials and hardware shall be
submitted for Architects approval prior to production and installation.
DIVISION 9 FINISHES
9.1
Ceiling Finishes
9.1.1 Replacement of Worn-out Acoustical Ceiling Board
Shall be 12mm-13mm thick recessed edge, sag
resistant plasterboard, coated with high quality,
splatter resistant, zero VOC, 100% acrylic paint that
provides a durable and washable film in matte finish.
Submit sample for Architects approval.
Framing system shall be 0.60mm thick GA. 24 x 19mm
x 50mm galvanized light steel furring channel spaced at
600mm (max.) on both ways with 0.80mm thick GA. 22
x 12mm x 38mm carrying channel spaced at 1200mm
(max.) on both ways and 0.40mm GA.26 x 25mm x
25mm metal wall angle and metal angle, attached to
slab/roof framing by a suspension clip and 6mm
diameter hanger rod joiner spaced at 1200mm (max.)
ArceBailonArce Architects
OS - 6
Outline Specifications
Floor Finishes
9.2.1 Re-polishing of Existing Wood Parquet
Shall be sanding and re-polishing of existing wood
parquet flooring coated with quick dry, low VOC, low
odor, alkyd/acrylic blend, water based wood stain in
polished finish with top coat of water based clear
finishes
9.3
Wall Finishes
9.3.1
9.3.2
9.3.3
9.3.4
ArceBailonArce Architects
OS - 7
9.4
Outline Specifications
9.4.2
ArceBailonArce Architects
OS - 8
Outline Specifications
26.3
Switches
ArceBailonArce Architects
OS - 9
26.4
Outline Specifications
Lighting Fixtures
Note: All lamps and lighting fixtures shall be CE, RoHs and U.L. approved
brand. Submit certifications for Architects approval.
26.4.1 Recessed Mounted Circular Downlight (LED Type complete with
casing) for high ceiling
Shall be 1x25 watts LED, warm white in 150mm
diameters cut out, recessed mounted LED downlight
(with cover) made from aluminum and synthetic
material in flat ring white color finish. Submit brochures
and sample for architects approval.
26.4.2 Wall Washer for Cut-out Wall Decoration Philippine Places (LED
Type)
Shall be 6 watts LED, warm white, dimmable wall
washer with 30x60 lens complete with leader cable,
jumper cable and mounting tract. Submit brochures
and sample for Architects approval.
26.4.3 LED Bulb for Existing Lighting Fixture Bulb Replacement
Shall be 10 watts (minimum only, verify required
lumens for proper lighting) LED bulb, cool
daylight/warm white. Submit brochures and sample for
Architects approval.
Audio-Video Systems
27.1.1 LED Video Wall 1 & 2 located along the Existing Fixed Glass Wall
Panels (store front)
Shall be 1920mm x 3072mm (verify drawings) display
area, with module dimension of 192mm x 192mm and
32x32 pixel module resolution Multi-Colored LED
display system that provides sharp image output, fluent
video display and high refresh rate, has better contrast
ratio and better color blending to deliver brighter and
more pleasant visual experience. Display resolution
shall be 320x512 pixels with 6+m best viewing
distance. Submit product catalog and shop drawings for
casing and framing for Architects approval. See
Technical Specification for further information.
ArceBailonArce Architects
OS - 10
Outline Specifications
Video Surveillance
28.1.1 CCTV Conduits and Pipes
Wiring connections shall be provided with roughing-ins.
PVC Conduits shall be Schedule 40, complete with
fittings and accessories for site conduits. Use
Intermediate Metal Conduit (IMC) for building conduits.
Complete with all necessary accessories and local
materials needed for the system connections.
28.1.2 CCTV Cables and Wires
Shall be CAT-6 cable for equipment and 1.5-mm2 (16
AWG) twin-twisted wire with a common sheath for
speakers. Comply with the requirement quality
standard.
-NOTHING FOLLOWS-
ArceBailonArce Architects
OS - 11