Beruflich Dokumente
Kultur Dokumente
Data Sheet
Produced in Germany,
the center for solar technology
-0/+5 Wp
Sunmodule Bisun:
Positive performance tolerance
SolarWorld AG relies on Germany as its technology location, thereby ensuring sustainable product quality.
The TUV Rheinland Power controlled inspection mark guarantees that the nominal power indicated for solar modules is
inspected at regular intervals and thus ensured. The deviation to TUV is maximum 2 percent.
Innovative glass technologies on front- and backside make extremely weather-resistant and robust solar modules possible.
The Sunmodule Bisun offers higher mechanical resilience and a longer service life.
Up to 25 % more yield thanks to the use of highly efficient duo cells - an innovative development based on PERC cell technology.
Those bifacial cells convert the sunlight from all directions into power through their active back side.
The positive power tolerance guarantees utmost system efficiency. Only modules achieving or exceeding the designated
nominal power in performance tests are dispatched. The power tolerance ranges between -0 Wp and +5 Wp.
SolarWorld is setting new standards with the groundbreaking 30-year linear performance guarantee: a maximum degradation
of just 0.35% p.a. provides guaranteed module performance of 90% after 21 years, and 86.85% after 30 years.
www.solarworld.com
SW 270 duo
PERFORMANCE UNDER Optimized Conditions
6%
10 %
20 %
25 %
Pmax
285 Wp
295 Wp
319 Wp
331 Wp
39.0 V
Energy boost
Maximum power
Open circuit voltage
Uoc
39.0 V
39.0 V
39.0 V
Umpp
31.0 V
30.9 V
30.6 V
30.5 V
Isc
9.84 A
10.21 A
11.14 A
11.60 A
Impp
9.20 A
9.55 A
10.42 A
10.85 A
Module efficiency
16.99 %
17.57 %
19.03 %
19.72 %
Maximum power
Pmax
270 Wp
Maximum power
Pmax
Uoc
39.0 V
Uoc
201 Wp
35.7 V
Umpp
31.3 V
Umpp
28.6 V
7.50 A
Isc
9.28 A
Isc
Impp
8.68 A
Impp
7.01 A
Module efficiency
16.10 %
Module efficiency
12.01 %
COMPONENT MATERIALS
- +
4 x 6,6
6.6
60
Cell type
180.85
bifacial duo
Cell dimensions
4x9
1000
156 mm x 156 mm
Front
Back
Frame
J-Box
IP65
Connector
1675
H4
THERMAL CHARACTERISTICS
DIMENSIONS / WEIGHT
287.50
48 C
Length
1675 mm
NOCT
Width
1001 mm
TK Isc
Height
33 mm
TK Uoc
-0.31 %/K
Weight
21.5 kg
TK Pmpp
-0.43 %/K
0.044 %/K
-0 Wp / +5 Wp
1000 V
25 A
-40C to +85C
Ordering information
Order number
Description
82000116
SolarWorld AG reserves the right to make specification changes without notice. This data sheet complies with the requirements of EN 50380.
90000935 | 2016-02-11 EN
For maximum system yield and optimum performance ratio we recommend the
following installation guide lines: