Beruflich Dokumente
Kultur Dokumente
April 2011
FAN7317B
LCD Backlight Inverter Drive IC
Features Description
High-Efficiency, Single-Stage Power Conversion The FAN7317B is a LCD backlight inverter drive IC that
controls P-N full-bridge topology using a new propriety
Wide Input Voltage Range: 6V to 28V
phase-shift method.
Backlight Lamp Ballast and Soft Dimming
Minimal Required External Components The FAN7317B provides a low-cost solution and reduces
external components by integrating full wave rectifiers for
Precision Voltage Reference Trimmed to 2% open-lamp protection and regulation (patent pending).
ZVS Full-Bridge Topology The operating voltage range of the FAN7317B is wide, so
Soft-Start an external regulator isnt necessary to supply the voltage
PWM Control at Fixed Frequency to the IC.
Burst Dimming Function The FAN7317B provides protections such as open-lamp
Dynamic Contrast Ratio Function regulation, open-lamp protection, and short-lamp
Programmable Striking Frequency protection to increase the system reliability. The
FAN7317B provides a burst-dimming function and analog
Open-Lamp Protection (OLP) dimming is possible, in a narrow range, by adding
Open-Lamp Regulation (OLR) external components.
Short-Lamp Protection (SLP)
The FAN7317B is available in a 20-pin SOIC package.
Thermal Shutdown (TSD)
20-Pin SOIC
Applications
LCD TV
LCD Monitor
Ordering Information
Operating Packing
Part Number Package
Temperature Method
FAN7317BM Rail
-25 to +85C 20-Pin Small Outline Integrated Circuit (SOIC)
FAN7317BMX Tape and Reel
1. Features
High-Efficiency Single-Stage Power Conversion
P-N Full-Bridge Topology
Reduces Required External Components
Enhanced System Reliability through Protection Functions
20
19
18
17
16
15
14
13
12
11
CT
OLR4
OLR3
VIN
OUTD
OUTC
CMP
ENA
OLP4
OLP3
ON/OFF
OUTB
OUTA
OLR1
OLR2
OLP1
OLP2
BDIM
GND
IC1
REF
BCT
BDIM(0~3.3V)
10
1
13.00
12.60 A
11.43
20 11
B
9.50
10.65 7.60
10.00 7.40
2.25
1 10 0.65
PIN ONE 0.51 1.27 1.27
INDICATOR 0.35
0.25 M C B A
LAND PATTERN RECOMMENDATION
0.33
C 0.20
0.10 C
0.30
0.75 0.10 SEATING PLANE
X 45
0.25
NOTES: UNLESS OTHERWISE SPECIFIED
(R0.10)
A) THIS PACKAGE CONFORMS TO JEDEC
GAGE PLANE
(R0.10) MS-013, VARIATION AC, ISSUE E
0.25 B) ALL DIMENSIONS ARE IN MILLIMETERS.
8
0 C) DIMENSIONS DO NOT INCLUDE MOLD
FLASH OR BURRS.
1.27 D) CONFORMS TO ASME Y14.5M-1994
0.40 SEATING PLANE E) LANDPATTERN STANDARD: SOIC127P1030X265-20L
(1.40) DETAIL A F) DRAWING FILENAME: MKT-M20BREV3
SCALE: 2:1
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchilds worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductors online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.