Beruflich Dokumente
Kultur Dokumente
2017 2:1EllpsodalHeadBlankDameter
HeadType
Ellipsoidal
Diameter mm
2000 OD
StraightFace mm
50
Thickness mm
10
Material
CarbonSteel
RESULT
BLANKDIAMETER = 2374.29 mm
VOLUME = 1.1700 m3
BLANKWEIGHT = 343.13 kg
This K-SECAL small help tool calculates the 2:1 Ellipsoidal Head Blank Diameter. Head is formed from a circular plate of approximate blank diameter calculated using
below empirical formula. This diameter is good for initial planning and weight estimation.
OD + OD/24 + 2SF +2/3KR + (THK in case head thickness is equal to or greater than 25 mm/1 INCH)
Confirm with Head manufacturer before cutting the blank. Every manufacturer based on forming method have different diameter requirement.
Along with 2:1 Ellipsoidal Head Blank Diameter this tool also calculates head volume and blank weight. Select different type of metals from drop down for weight
calculation. Select FPS unit to calculate diameter in inch.
Compare above data between different types of heads (Hemispherical and Torispherical) by selecting from drop down.
Following formula has been used for calculating the Ellipsoidal head blank diameter:
where,
D = Outside Diameter of Ellipsoidal Head
S.F. = Straight Face
Kr = 0.17*D = Knuckle Radius
thk = Thickness of Head
Click below tabs to see the formula for calculation of:- Click to know formula for:
TORISPHERICAL HEAD
HEAD VOLUME
(TORISPHERICAL-HEAD-
HEAD BLANK WEIGHT
BLANK-DIAMETER.PHP)
HEMISPHERICAL HEAD
Vessel BOM (vesselbom/index.php/component/element/?view=elements&layout=vesselbom) Vessel Volume (horizontalvesselpartialvolume.php)
2:1 Ellipsoidal Head (ellipsoidalheadblankdiameter.php) Torispherical Head (torisphericalheadvolume.php) Hemispherical Head (hemisphericalheadblankweight.php)
(HEMISPHERICAL-HEAD-
Cone Calculation (conedevelopment.php) Terms of Use (termsofuse.php)
BLANK-DIAMETER.PHP)
COPYRIGHT KSECAL.COM 2015. ALL RIGHTS ARE RESERVED.
(http://www.statcounter.com)
http://www.ksecal.com/ellpsodalheadblankdameter.php 1/1