Global standards agencyISAhas submitted three control valve standards to ANSI for approval as American National Standards.
The standard ISA-75.08.01 (reaffirmation of ANSI/ISA-75.08.01-2002), applies to integral
flanged globe-style control valves between 15 mm (1/2 inch) to 400 mm (16 inches) long, having top, top and bottom, port, or cage guiding. The standard will aid users in their piping design by providing Class 125 flat face, and Classes 150, 250, 300, and 600 raised face, flanged control valve dimensions, without giving special consideration of the equipment manufacturer to be used.
The second standard in the group is ISA-75.08.05 (reaffirmation of ANSI/ISA-75.08.05-2002).
This standard applies to buttweld-end globe-style control valves between 15 mm to 450 mm long for Classes 150 through 2500. The standard will help in piping designs by providing buttweld-end globestyle control valve dimensions, regardless of manufacturer.
A third standard ISA-75.08.06, focuses on flanged globe-style control valves between 15 mm
(1/2 inch) to 450 mm (18 inches) long, which have top, top and bottom, port, or cage guiding. The standard will help users in their piping design by providing Classes 900, 1500, and 2500, flanged globe-style control valve dimensions, without giving special consideration to the equipment manufacturer to be used.