Beruflich Dokumente
Kultur Dokumente
Liquid Distributors
2
Packing element of Montz-Pak
Type BSH-400 with wall wipers
3
MONTZ-PAK TYPE A3
SPECIAL WIRE MESH PACKING TO FRACTIONATE THERMALLY INSTABLE SUBSTANCES UNDER VACUUM
Characteristics Materials
n ideal for vacuum columns n s tainless steels such as 304, 410 S, 316,
n very low liquid loads (< 100 l/m /h) are possible
2 316 Ti, 316 L, and 904 L
n low pressure drop per theoretical stage n H
astelloy C4, aluminum, copper, titanium,
monel, etc.
n high separation efficiency thanks to the good wettability of
the packing surfaces n o
ther materials are available upon request
n capillary effect of the special wire mesh Column Data
n d
iameters from 40mm up to 7m and more
Applications
The main fields of application are in the fractionation of n liquid load from 20l/m2/h
thermally instable substances which are rectified under n o
perating pressures from approximately 1mbar.
vacuum from approximately 1 mbar. n m
inimal liquid hold-up
Applications include: Corrugation angles:
n ethereal oils n s tandard type with 60o
n isomer mixtures n 4
5o or other angles upon request
n fatty acids Fractionating stages
n fatty alcohols If using mixtures with good wetting properties, approximately
n deodorizing of edible oils 5 to 12 theoretical stages per meter are obtained in technical
columns, depending on the packing surface.
n degassing of transformer oils
Assembly
n pilot columns
The packing layers are manufactured either as one piece or
in segments. Installation can be made through shell flanges
or manholes.
4
MONTZ-PAK TYPE A3-500M
LOWEST PRESSURE DROP AT HIGH EFFICIENCIES
Structure of a Montz-Pak
Type A3-500 with a diameter
of 3000mm
The new A3-500M offers a reduced pressure drop of 20%
compared to the standard packing A3-500.
Higher throughputs, lower total pressure drops, smaller tower
diameters and tower debottlenecking are possible due to the
optimized crimp geometry. The A3-500M is ideal in applications PAK-TYPE SPECIFIC SURFACE
that are under high vacuum and have the smallest liquid m2/m3
distribution densities.
A3-500 500
Characteristics
n lowest pressure drop per theoretical stage A3-750 750
n higher capacity
A3-1000 1000
n equal separation efficiency to A3-500
Applications A3-1200 1200
The main applications are the separation of thermal unstable
A3-1500 1500
products that are separated under high vacuum up to 0.5 mbar.
n essential oils A3-1900 1900
n isomer mixtures
Other surface sizes are
n vitamins
available upon request
n fatty acids
n fatty alcohols
n isocyanates
5
MONTZ-PAK TYPE B1
THE EFFICIENT METAL SHEET PACKING
6
Montz-Pak Type B1-250,
Diameter 4000mm
7
MONTZ-PAK TYPE BSH
HIGH-PERFORMANCE PACKING FOR THERMAL MASS TRANSFER
Characteristics n H
astelloy C4, aluminum, copper,
n high capacity and flexibility titanium, monel, tantalum, etc.
n good wettability, thus n o
ther materials are available
ensuring excellent contact upon request
surfaces between vapor and Column Data
liquid n c olumn diameter 70mm up to
n high fractionating efficiency 11m and more
almost up to capacity limit n liquid
load from 20 l/m2/h
n liquid loads 0.2 to >150 m3/m2/h n o
perating pressures from
n low pressure drop vacuum up to 100 bar
n solutions for any fractionating problem thanks to a n m
inimal liquid hold-up
variable specific surface Separation stages
Applications Eight theoretical stages per meter
n vacuum columns and more are possible depending
n normal-pressure and high-pressure columns
on the design.
n absorption Assembly
The packing layers
n natural gas drying
are manufactured either as one piece or in segments.
n refinery columns Installation in the columns is effected either through shell
n petrochemical columns flanges or manholes.
n wastewater stripping columns TYPE FOR HIGH
n fractionating columns for the chemical industry STANDARD TYPE (45O) THROUGHPUTS (60O)
n columns for dealcoholizing beer PAK-TYPE SPEC. SURFACE PAK-TYPE SPEC. SURFACE
m2/m3 m2/m3
n revamping of existing tray or random rings columns
to improve their capacity BSH-250 250 BSH-250.60 250
Materials BSH-300 300 BSH-300.60 300
n stainless steels such as : 304, 410S, 316, 316 Ti, BSH-350 350 BSH-350.60 350
316L and 904L BSH-400 400 BSH-400.60 400
n carbon steel BSH-500 500 BSH-500.60 500
BSH-750 750 BSH-750.60 750
8
Other surface sizes available upon request.
MONTZ-PAK TYPE M / MN
THE NEW HIGH-PERFORMANCE PACKING
The Montz-Pak
Type M and Type MN are
further developments of the tried and
trusted Montz structured packing Type B1, A3
and BSH. It has its own patent coverage. The optimized
crimp geometry creates two packing types that
meet the demands for high separation efficiency
and throughput exceptionally well.
B1-250M 250
B1-350M 350
B1-250MN 250
B1-350MN 350
B1-500MN 500
Other surface sizes available
Structure of the upon request.
Montz-Pak Type M / MN
9
RANDOM TOWER PACKINGS
SADDLE, PALL AND RASCHIG RINGS
10
LIQUID DISTRIBUTORS
KNOW-HOW FROM MONTZ FOR MAXIMUM PERFORMANCE
The basic design of the Montz channel-type liquid distributor Solutions for the
Type S is the tried and trusted Montz modular system. The toughest applications
standard drain tubes have additional drainage sleeves so that Because of the great demands made by liquid distribution
the liquid flows from each tube and is split into a number of on structured packings, Montz has gained a reputation as
small individual flows. The design enables drip point densities a specialist in this field. Special designs tailored to even
of at least 100 per m2 for even small amounts of liquid. extreme requirements are standard for us.
Detailed view of
the Type S
12
Montz liquid distributor Type S for use in a
partition column
The Montz Type S liquid distributor can be specially designed for the
lowest liquid sprinkling densities
13
PERFORMANCE CHARTS The following charts will give you an idea of the
efficiency of Montz packings. Details are given on the
separation efficiency and pressure drop of the main
OVERVIEW OF PERFORMANCE AND PRESSURE DROP
types of packings. Liquid loads B in m3/m2/h.
dP in mbar/meter
Nth/meter
7 4.5
4
6
3.5
Nth/meter
5 2
3
4 2.5
3 2
1.5 1
2
1
1 0.5
0 0 0
0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4
F-Factor in Pa0.5 F-Factor in Pa0.5 F-Factor in Pa0.5
14
MONTZ-PAK TYPE B1-125
SEPARATION EFFICIENCY PRESSURE DROP
dP in mbar/meter
Nth/meter
dP in mbar/meter
Nth/meter
15
PERFORMANCE CHARTS
OVERVIEW OF PERFORMANCE AND PRESSURE DROP
5 6 6
4 5 5
3 4 4
3 3
2
2 2
1 1 1
0 0 0
0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5 6
F-Factor in Pa0.5 F-Factor in Pa0.5 F-Factor in Pa0.5
dP in mbar/meter
Nth/meter
9 9
6 8 8
Nth/meter
5 7 7
6 6
4
5 5
3 4 4
2 3 3
1 2 2
1 1
0
0 0.5 1 1.5 2 2.5 3 3.5 4 0 0
F-Factor in Pa0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5
F-Factor in Pa0.5 F-Factor in Pa0.5
16
MONTZ-PAK TYPE B1-350MN
Separation efficiency in system chloro-/ethylbenzene Pressure drop in system chloro-/ethylbenzene Pressure drop in system air/water
for Montz-Pak B1-350MN for Montz-Pak B1-350MN for Montz-Pak B1-350MN (B in m3/m2h)
B = 20 B = 10 B = 5 B = 2
8 10 10
5 6 6
4 5 5
3 4 4
3 3
2
2 2
1 1 1
0 0 0
0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5
F-Factor in Pa0.5 F-Factor in Pa0.5 F-Factor in Pa0.5
5 6 6
4 5 5
3 4 4
3 3
2
2 2
1 1 1
0 0 0
0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5
F-Factor in Pa0.5 F-Factor in Pa0.5 F-Factor in Pa0.5
17
PERFORMANCE CHARTS
OVERVIEW OF PERFORMANCE AND PRESSURE DROP
dP in mbar/meter
Nth/meter
dP in mbar/meter
Nth/meter
18
MONTZ QUALITY
PRECISE MEASURING FOR QUALITY ASSURANCE
19
Services
Complete service to improve the capacity of
existing columns