Beruflich Dokumente
Kultur Dokumente
* 4054 *
M 105
4054
BOARD DIPLOMA EXAMINATION, (C14)
OCT/NOV2015
9
DMEFIRST YEAR EXAMINATION
47
ENGINEERING MECHANICS
PARTA 310=30
47
Instructions : (1) Answer all questions.
(2) Each question carries three marks.
(3) Answers should be brief and straight to the point and
shall not exceed five simple sentences.
9
(a) Equilibrium 1
47
(b) Equilibrant 1
/4054 1 * [ Contd...
* axis theorem with a line diagram.
5. State perpendicular 3
9
(c) Ideal load 1
47
8. Define the following :
(a) Horizontal range 1
(b) Time of flight 1
9
9. Write the law of machine with effort vs load diagram. 3
47
10. List out any three names of inversions of four-bar chain. 3
PARTB 105=50
9
/4054 2 * [ Contd...
13. A body of weight*735 N rests on a rough inclined plane. The
plane is inclined at an angle 30 with the horizontal and the
angle of friction between the body and plane is 15. Find the
horizontal force required to hold the body from sliding down
the plane.
9
is the resistance offered by the wood to the bullet? What is the
exit velocity, if the same bullet is fired into a 150 mm thick
47
wood?
15. Find the MI of the I-section shown below in the figure about
centroidal axes. [All dimensions are in mm]
9
47
9
47
*
9
of SHM. 4
(b) If the velocities of a body moving with SHM are 8 m/s and
4 m/s at 1 m and 2 m respectively from a fixed point,
find
(i) amplitude;
(ii) periodic time;
(iii) maximum velocity;
(iv) maximum acceleration. 6
/4054 3 * [ Contd...
* an effort of 98 N lifts a load of 2450 N and
17. In a lifting machine
an effort of 1274 N lifts a load of 3920 N. Establish the law of
machine. Calculate
(a) the effort required to lift a load of 5880 N;
(b) the load that can be lifted using an effort of 196 N;
(c) the effort lost in friction.
9
sketch. 5
47
HHH
9
47
9
47
*
9
47
/4054 4 * AA15TPDF