Beruflich Dokumente
Kultur Dokumente
An employer may accept a performance qualification made for another employer provided t
he ___________________
9.Guided bend specimens for welder qualifications shall have no open defects in the weld or
heat affected zone
exceeding ______________
A.1/16
B.1/8
C.3/16
10.The inspector is reviewing a radiograph of a pipe weld, the pipe wall is thick. What is th
e hole type IQI designation
A.12
B.15
C.17
D.20
Section/page _____________________ Reference Publication__________________
11.In a piping system, the most susceptible location for cracking is ______________
A.Around supports
B.In welds
C.In bolting
A.1
B.2
C.3
D.11B
A.1.12
B.1.88
C.2.12
D.2.88
14.The preheat zone shall extend at least ___________ beyond each edge of the weld
A.6T
D.25 mm (1 inch)
15.During procedure qualification, how many nick-break specimens are required if the pipe is N
PS 8 S/80, 0.500 wall?
A.1
B.2
C.4
D.None
16.The owner/user shall maintain appropriate permanent and progressive records of each pipi
ng system. The records
A.0.15% carbon
B.0.20% carbon
C.0.30% carbon
D.0.17% carbon
A.300F
B.235F
C.175F
D.None
19.An alternative to inspection of buried piping is to leak test the system with liquid at a press
ure at least
______________
D.Actual
A.1
B.2
C.3
21.As a part of general maintenance, any repair organization may make repairs to a piping sy
stem as long as:
be subjected to ______________
A.Pearlite structure
B.annealing
C.graphitization
D.normalizing