Beruflich Dokumente
Kultur Dokumente
REACH TRUCKS
3,000 3,500 4,000 lbs
Yale NR/NDR-DB reach trucks combine connections, resulting in improved reliability CAPACITY
the latest technology with improved and improved visibility through the mast.
NR 3500 4000
performance to effectively meet the AC Motors include traction and main
demands of high density warehousing. NDR 3000
hydraulics. AC motor technology delivers
Operator's compartment features a new high motor efficiency, braking torques, and
movement forward in ergonomic design. powerful acceleration. A speed sensor built Dash display features a graphic LCD
The NR/NDR-DB offers two (2) operator into the motor provides feedback to the Multifunction Smart Display with Back
compartments, the side-stance and control system, allowing motor speed and lighting, bar Graphic Battery Discharge
the fore/aft stance compartments. The direction to be continuously monitored. Indicator and Lift Interrupt, Hour Meter;
fully padded operator's compartment A thermal protection system controls the Truck, Traction and Hoist Pump,
provides back and hip support. The power delivered to the motor. In addition, Performance Mode selection and Indication
noticeable non-pedal large floor has increased motor maintenance interval is with lift interrupt, LED Status Indicators
room for movement and is equipped achieved through the brushless design of with symbols, Programmable Performance
with an Operator Presence Switch. the auxiliary hydraulics and steer motors. Modes, User passwords and Operator logs
with history, Steer Wheel Angle Graphic
The side stance operator compartment Drive unit uses a double gear reduction
Indication, Truck Inspection Check List,
has a large backrest pad with integral drive train with a sealed permanently
Truck Speed Indication in MPH or KPH.
lumbar and armrest support. lubricated steer bearing, greatly reducing
the ingress of debris increasing bearing Four operator selectable driver modes are
The multifunction control handle assembly
life. NEW sealed for life drive unit, requiring available; Modes 4, 3, 2, and 1. Mode 4
is adjustable 3 inches in and out, and
no oil changes and a service free input provides maximum acceleration and travel
6 inches vertically with the standard
joint. NEW serviceable wheel seal. speeds. Mode 3 provides high travel
adjustable backrest support. The control
speeds at reduced acceleration. Mode 2
handle is ergonomically designed with an Yale Hi-VisTM mast is available in triplex
reduces travel speeds and acceleration
integral palm rest, thumb rest, and can be configurations for various heights. The
further. Mode 1 reduces travel speed by
comfortably operated. The handle provides trunnion mounted mast design provides
40% and also limits acceleration. All 4
conveniently located controls for forward/ for good load distribution and allows
modes are completely programmable
reverse, lift/lower, proportional reach/ for easy service. The hydraulic cylinder
by supervisor or technician.
retract, tilt, horn and optional sideshift. incorporates a chrome plated rod for
corrosion resistance. The cylinders are Console covers are thermally
The fore/aft stance compartment provides
easily serviced and provide integral formed. The covers are easy to
a support point for the operator when
cushioning for excellent mast channel remove, providing access to
facing in either direction. The multi-function
staging. Velocity fuses are provided to main electrical components.
handle assembly is a single axis design
and is mounted on the side pad assembly. control lowering in the event of hydraulic
The single axis design provides additional failure. A manual lowering valve is standard. (continued on back)
dynamic support point for operator when Brake is spring applied and electrically
facing forward. The optional Aft Travel released. Mounted above the drive
Control Handle with Laser Operator motor and controlled by the Vehicle
Detection provides speed & direction System Manager (VSM), the assembly
control when the operator is facing aft. provides emergency stopping and
The performance parameters utilized parking brake for the truck.
by the Next Generation of reach trucks Vehicle System Manager (VSM) is an
offers a high degree of customization electronic module that monitors all truck
for specific applications, optimizing functions. The VSM is the CANbus network
unit and operator efficiency to match master node and includes the vehicle
application requirements. NEW application software. Built with input/
Yale iSi TechnologyTM offers simple output capability, the system monitors
on-board parameter adjustment, inputs from the operator, vehicle
diagnostics and interface for operators, performance and simultaneously
supervisors and service personnel. adjusting the vehicle operation
for the best performance.
CANbus Technology streamlines digital
communications between truck systems
through one main master controller. Dash
display and traction controller are controlled
via the CANbus network. The CANbus
controller reduces wiring and electrical
Mast table
NDR030DB
Truck with 14.5" Battery Compartment and 42" ID
Triplex - 4" Between Loads
Pallet Width (inches) ZERO CLEARANCE
36 40 44 48 AISLE WIDTH
Pallet 36 90 90 90 90 RIGHT ANGLE STACKING
Length AISLE LAYOUT
(inches) 40 91 91 91 91
44 95 94 94 93
48 99 99 98 98
Sideshift is Standard on Double Reach
NDR030DB
Truck with 16.5" Battery Compartment and 42" ID
Triplex - 4" Between Loads
Pallet Width (inches)
36 40 44 48
Pallet 36 91 91 91 91
Length
(inches) 40 92 92 91 91
44 97 97 96 95
48 101 101 100 100
Sideshift is Standard on Double Reach
21 7.1 (181) NR035DB
7.3 (185) NR040DB
24.0
(610)
36.0 (914)
18 19
14
16
17
Width Across Mast Channels
30.0" (762) 5.5" Mast
Sidestance Model 13
Lowered 56.5 (1435)
Raised 62.5 (1588)
7.1 (181)
Forward Stance Model battery
55.5 (1410) roller ht.
21
13.6 (345)
55.6 (1412)
42.0 (1067)
36.0 (914)
18 19
14
Sidestance Model
Lowered 56.5 (1435) 13
Raised 62.5 (1588)
7.1 (181)
Forward Stance Model battery
55.5 (1410) roller ht.
O.H.G.
Width
42.1
(1070)
5.6 4.6
(143) (117)
24
5.0 (127) x 3.9 (99) 5.0 (127) x 2.9 (74)
WELD-ON BOX
11 Front Rear
Axle Loading - Front / Rear with Assembly Retracted Static with Rated Load and Max. Wt. Battery lbs.
12 6750 3800
13 Standard Lift (Max Fork Height) in. (mm)
14 Standard Mast Lowered (OALH) in. (mm)
15 Freelift (Max Fork Height) in. (mm)
Mast Triplex Hi-VisTM See Mast Table
16 Standard Mast Extended w/ LBR in. (mm)
17 Top of OHG in. (mm)
18 Operator Clearance in. (mm)
DIMENSIONS
31 Empty ft/min 60
32 2000 ft/min 46
33 3000 ft/min 43
Lift Speed
34 3500 ft/min 40
35 4000 ft/min N/A
36 4500 ft/min N/A
37 Empty ft/min 85
Lowering Speeds - Standard / Optional
38 Rated Load ft/min 85
39 Size - front load wheels (tandem articulating) Standard 5 x 3.9
WHEELS & TIRES
40 Drive Caster
Size - drive tire / dual casters Standard
41 12.0 x 5.5 7.9 x 2.2
12.5 Battery Compartment in. 55.35
42 Wheel Base 14.5 Battery Compartment in. 55.35
16.5 Battery Compartment in. 57.36
43 Method of Control Foot
Brakes, service / parking
44 Method of Operation Spring Apply / Electric Release
45 Battery, type Lead Acid
ELECTRIC
Single Reach - add 1" for Sideshift, Double Reach is standard with Sideshift
O.H.G.
Width
42.1
(1070)
4.6 5.6
(117) (143)
24 5.0 (127) x 2.9 (74) 5.0 (127) x 3.9 (99)
WELD-ON BOX
Yale 1
NR035DB NR040DB NR040DB NDR030DB NDR030DB 2
SWB SWB SWB LWB LWB 3
GENERAL
3500 (1588) 4000 (1814) 4000 (1814) 3000 (1361) 3000 (1361) 4
24 (610) 24 (610) 24 (610) 24 (610) 24 (610) 5
Electric - 36 volt Electric - 24 volt Electric - 36 volt Electric - 24 volt Electric - 36 volt 6
Stand Stand Stand Stand Stand 7
Poly / Poly / Rubber Poly / Poly / Rubber Poly / Poly / Rubber Poly / Poly / Rubber Poly / Poly / Rubber 8
4 / 2 (1x) 4 / 2 (1x) 4 / 2 (1x) 4 / 2 (1x) 4 / 2 (1x) 9
4950 5000 5000 5250 5250 10
WT.
Front Rear Front Rear Front Rear Front Rear Front Rear 11
6750 3800 7400 3700 7400 3700 6300 4050 6300 4050 12
13
14
15
See Mast Table See Mast Table See Mast Table See Mast Table See Mast Table
Chassis 16
42.8" 17
(1087) 3.9
(100) 18
DIMENSIONS
3 Fwd / 4 Back 3 Fwd / 4 Back 3 Fwd / 4 Back 3 Fwd / 4 Back 30.0 (762) 3 Fwd / 4 Back 19
14.2 (360)
1.60 x 3.9 x 42 1.80 x 3.9 x 42 1.80 x 3.9 x 42 1.60 x 3.9 x 42 1.60 x 3.9 x 42 20
See Mast Table
O.H.G. See Mast Table See Mast Table See Mast Table See Mast Table 21
34- 49
Width(1 increments) 34- 49 (1 increments) 34- 49 (1 increments) 34- 49 (1 increments) 34- 49 (1 increments) 22
39.042.1
x 12.5 x 31.5 39.0 x 12.5 x 31.5 39.0 x 12.5 x 31.5 N/A N/A
(1070)
39.0 x 14.5 x 31.5 39.0 x 14.5 x 31.5 39.0 x 14.5 x 31.5 39.0 x 14.5 x 31.5 39.0 x 14.5 x 31.5 23
39.0 x 16.5 x 31.5 39.0 x 16.5 x 31.5 39.0 x 16.5 x 31.5 39.0 x 16.5 x 31.5 39.0 x 16.5 x 31.5
65.74 65.74 65.74 N/A N/A
65.74 65.74 65.74 65.74 65.74 24
5.6 4.6
67.74 67.74 67.74 (143) 67.74 (117) 67.74
See RAS Table 24 See RAS Table See RAS Table See RAS Table See RAS Table 25
Yes Yes 5.0 (127) x 3.9 (99) Yes 5.0 (127) x 2.9Yes
(74) Yes 26
6.7/6.5 6.5/6.5 6.7/6.5 WELD-ON BOX 6.5/6.5 6.7/6.7 28
6.7/6.5 6.5/6.05 6.7/6.0 6.5/6.5 6.7/6.7 29
PERFORMANCE
75 60 75 60 75 31
54 46 54 44 51 32
50 43 50 40 47 33
47 40 47 N/A N/A 34
N/A 38 45 N/A N/A 35
N/A N/A N/A N/A N/A 36
85 85 85 85 85 37
85 85 85 85 85 38
5 x 3.9 5 x 3.9 5 x 3.9 5 x 2.9 5 x 2.9 39
WHEELS & TIRES
Drive Caster Drive Caster Drive Caster Drive Caster Drive Caster 40
12.0 x 5.5 7.9 x 2.2 12.0 x 5.5 7.9 x 2.2 12.0 x 5.5 7.9 x 2.2 12.0 x 5.5 7.9 x 2.2 12.0 x 5.5 7.9 x 2.2 41
55.35 55.35 55.35 N/A N/A
55.35 55.35 55.35 60.35 60.35 42
57.36 57.36 57.36 62.36 62.36
Foot Foot Foot Foot Foot 43
Spring Apply / Electric Release Spring Apply / Electric Release Spring Apply / Electric Release Spring Apply / Electric Release Spring Apply / Electric Release 44
Lead Acid Lead Acid Lead Acid Lead Acid Lead Acid 45
ELECTRIC
7.5 (5.6) 7.5 (5.6) 7.5 (5.6) 7.5 (5.6) 7.5 (5.6) 46
14.8 (11.0) 14.8 (11.0) 14.8 (11.0) 14.8 (11.0) 14.8 (11.0) 47
Transistor Transistor Transistor Transistor Transistor 48
Transistor Transistor Transistor Transistor Transistor 49
Infinitely Variable Infinitely Variable Infinitely Variable Infinitely Variable Infinitely Variable 50
Reach mechanism includes strong rear frame weldment and inner Options
arm weldment cross-members. The open carriage design and RF Terminal Bracket
optimal hose routing provide good visibility. The proportional RF Handheld Scanner Holder
reach/retract cylinders are fully cushioned for smooth Impact Monitor
operation. Pivot points have grease fittings for lubrication, Audible Alarm
and dual tilt cylinders are used to evenly distribute the load. Reverse Operated
Hydraulic functions of the truck are managed by the VSM. Forward and Reverse Operation
The system features a Motor Controller, AC Hoist Motor, Forward/Reverse and Lift/Lower Operation
Pump and Hydraulic Reservoir. Efficient design and the Visible Alarm
use of O-ring face seals have allowed significant reduction Amber Strobe (Continuous operation with Key-on)
of hydraulic fittings reducing potential leak points. Amber Strobe (Forward and Reverse Operation)
Lights
Frame features a fixed drive unit mounting with spring
Operator Desktop LED Light (OHG Mounted)
loaded caster assembly to compensate for uneven floors.
Dual Headlight 12 Volt (OHG Mounted)
It also incorporates thick plates, strong rear frame, and
Rear Worklight 12 Volt (OHG Mounted)
mast connections for enhanced durability. The frame is
Operator Compartment Rear Door1
available in various battery compartment sizes based
on truck capacity. The frame is available in 12.5 inches, Various Fork Lengths
14.5 inches and 16.5 inches for the 3500 lb. and 4000 Various I.D. Outriggers
lb. trucks. The 14.5 and 16.5 inch battery compartments Operator Overhead Fan
are available for the 3000 lb. double reach model. Cooler/Freezer Package
Sideshifter (Standard on the Double Reach)
All wiring is numbered for easy trouble-shooting and meets Various Load Wheels and Drive Tires
the UL 583 requirements. Sealed electrical connectors Steer Caster Electrically Steered
are used throughout the truck. Electrical connections are Side Stance With Adjustable Steering wheel position
provided for convenient field installation of electric options. Fore/Aft Stance With Adjustable steering wheel
Additional features include a bolt-on 36 inch (910 mm) high load position, with or without Aft travel control handle
backrest extension and 42 inch (1067 mm) long hook type forks
as standard. All non-sealed friction points are equipped with
grease fittings. The truck is painted gold, parchment, and black.
BATTERY SPECIFICATIONS
Capacity Battery Dimensions Min Batt Max Batt
Battery Battery
Compartment 6 Hour Rate X Max. Y Max. Z Max. Weight Weight
Size Voltage
amp hr kw hr in. (mm) in. (mm) in. (mm) lb. (kg) lb. (kg) X
406 TYP.
(16 in.)
12.5 24 1085 25.4 38.8 (985) 12.25 (311) 31.0 (788) 1400 (635) 1900 (862)
14.5 24 1240 29.0 38.8 (985) 14.25 (362) 31.0 (788) 1600 (726) 2100 (953) Z
14.5 36 775 27.2 38.8 (985) 14.25 (362) 31.0 (788) 1600 (726) 2100 (953)
Y
16.5" 24 1395 32.6 38.8 (985) 16.25 (413) 31.0 (788) 1850 (839) 2350 (1066)
16.5" 36 930 32.6 38.8 (985) 16.25 (413) 31.0 (788) 1850 (839) 2350 (1066)
Yale is a Registered Trademark and is a Registered Copyright. Truck performance may be affected by the condition of the vehicle, how it is equipped and the application. Consult your Yale Industrial
Yale Materials Handling Corporation 2015. All Rights Reserved. Truck Dealer if any of the information shown is critical to your application. Specifications are subject to change without notice.
Manufactured in our own ISO 9001 and 14001 Registered Facilities This truck meets all applicable mandatory requirements of ANSI B56.1 Safety Standard for Powered Industrial Trucks at the time of
manufacture. Classified by Underwriters Laboratories, Inc., as to fire and electric shock hazard only for Type E industrial trucks.
2450-3 10/2015 All trucks shown with optional equipment.