Beruflich Dokumente
Kultur Dokumente
mir-izdeliy.at.ua
GREAT AMERICAN #P276 - Assembly Instructions
1. Select your material from a variety of
hardwoods or solid core plywood.
2. Measure each pattern piece and cut the work
DOWNLOADABLE PATTERNS TM pieces to size accordingly. Sand as necessary.
The Berry Basket Copyright 2002 All Rights Reserved 3. Make all pattern pieces by adhering the paper
www.greatamericanscrollsaw.com a division of The Berry Basket patterns to the work pieces with a repositionable
spray adhesive. Cut the outer shapes and any
J interior designs. And drill where indicated.
4. Remove all paper patterns. Sand where needed.
I The edges can be rounded by sanding or using
O C a small roundover router bit if desired.
5. Assemble by first attaching the Front and Rear
H Windows to one Side. Then attach the Seat
assembly to the same Side. Next attach the
M B remaining Side and Roof. Now attach the Hood
J and Radiator assembly to the Frame. Next attach
J E the Side assembly to the Frame. Then attach the
B Box Front, Box Sides, and Bed together and
G secure to the Frame. Now, attach the Top Rails
K A
and Tailgate. Finally, attach the Wheels, Fenders,
and Lights, and finish as desired.
N D L
F
#P276
1926 FORD MODEL - T ROADSTER
#P276
1926 FORD MODEL - T ROADSTER
Description Item Qty Size
Side/Door A 2 3/8T x 3 5/8W x 4 5/8L
Box Side B 2 3/8T x 2 9/16W x 5 1/2L
Roof C 1 3/8T x 4 1/8W x 4 1/2L
Fender D 2 3/4T x 2 5/8W x 12 1/4L
Hood E 1 2 5/8T x 3W x 3 1/2L
Frame F 1 3/4T x 4 1/2W x 12 3/8L
Radiator G 1 3/8T x 2 1/2W x 2 5/8L
Front Window H 1 3/8T x 3 3/4W x 4 5/8L
Rear Window I 1 3/8T x 3 3/4W x 4 5/8L
Seat Back & Seat J 1 each 3/8T x 1 5/8W x 3 3/4L
Seat Base K 1 1 1/2T x 1 1/2W x 3 3/4L
Box Front L 1 3/8T x 2 1/8W x 3 3/4L
Side Rail (O)
Tailgate M
Bed N 1 3/8T x 3 3/4W x 4 7/8L
Side Rail O 2 3/8T x 5/8W x 5 1/2L
mir-izdeliy.at.ua
#P276
#P276
Drill using a #52 drill bit
(#A157) and use a #17 x 3/4
finishing nail for door hinge
With table flat, start Roof (C)
mir-izdeliy.at.ua
at A and cut
through B and C,
ending at D. Then A
with table tilted B Top view of Doors Front of auto
down to the left at Door hinge
10 and using a #9 3/8 T Left Door
blade, cut from D
to A on the right Side (A)
cut at a 10 angle
door and from A to
C D
Radiator (G)
Roof (C)
Tailgate (M) Stock: 3/8,
top view
Box Side
Bed 3/8T
Drill for Tailgate to
pivot on small dowel
or rod
#P276
The Berry Basket Copyright 2002
mir-izdeliy.at.ua
Hood (E)
Thickness 2 5/8, front view
Pattern overlap line
Recommended: before cutting the
outer shape of the Hood and the
Radiator - cut the interior design
of the Radiator, then glue the
Radiator to the Hood and cut the
outer shape of both.
Fender (D)
#A246
Stock: 3/4
Hood (E)
Thickness: 2 5/8,
Fender (D)
Radiator (H) Pattern overlap line
goes here
#P276
mir-izdeliy.at.ua
Stock: 3/8, front view
Frame (F)
Stock: 3/4
Left pattern piece.
Rear edge of
Bed (N)
Steering
Box Front (L)
Rear Window (I)
Seat Base (K)
wheel
goes here
mir-izdeliy.at.ua
#P276
The Berry Basket Copyright 2002
Rear Window (I)
Stock: 3/8
Bed (N)
Stock: 3/8
Tailgate (M)
Stock: 3/8
#P276
mir-izdeliy.at.ua
The Berry Basket Copyright 2002