Following testing facilities are available in the Laboratory
1.0 High voltage test set up- (up to 200kV) 1.1 Dry power frequency voltage test as per IEC 60060-1/IS-2071. 1.2 Wet power frequency voltage test as per IEC 60060-1/IS-2071. 1.3 Visible discharge test. as per IEC 60060- 1/IS-2071. 2.0 Thermal Mechanical Performance test setup
3.0 Endurance test set up:
The tests are being carried out as per RDSO Spec No-TI/SPC/OHE/WR/1060
4.0 Universal Testing machine:(up to 300 kn)
4.1 Tensile Strength test 4.2 Compression test 4.3 Bending Test
6.1 Fatigue test 6.2 Sweep sine testing 6.3 Discrete frequency test 6.4 Resonance search test 6.5 Endurance test of product 7.0 Contact wire wear test set up Electrical Development Laboratory