Beruflich Dokumente
Kultur Dokumente
By utilizing a high proportion of proven technology from previous rigs in the Pit Viper series, the progress towards greater
energy efficiency, safety and productivity continue. The hydraulic top-head drive rotary head that our customers have always
preferred is retained, as well as the automatically tensioned hydraulic cable feed system, and the hydraulic powered break out
tools. The elevated cabin is larger than that used on PV-351 and has been further improved over the PV-235 cabin. The live
tower is capable of single-pass drilling of a 65 ft (19.8 m) clean holes, with bit changing above deck. Single-pass drilling yields
higher drilling efficiencies (up to 25% when drilling in soft material) by eliminating rod change time and allowing more time
for drilling. Development of the PV-316 multi-pass model and high pressure compressor options for DTH drilling are well
advanced and expected to be launched during 2013.
Excellent serviceability
The Pit Viper 311 is designed to be a maintenance friendly machine,
with an optional 360-degree walk around access that allows for safe,
easy movement with unsurpassed access to service points. Equipped
with tower access and fall restraint system, emergency stops, accessible
staircases and spacious enclosures for components, the PV-311 offers
easy accessibility for service. The valve stand is centrally located above
the deck for auxiliary hydraulic components and I/O modules, and air
filters are located at the non-drill end of the rig. Theres an open access on
both sides to service the air compressor and engine, as well as easy access
to the hydraulic system. A consolidated filter rack is offered providing ease
of access to all fluid filters on the machine.
Standard features
Insulated, pressurized, air conditioned cab Ground level cable horn actuation 24 HID lights are standard
with tinted glass and excavator style platform 12 V power outlet Auto-tension
RCS Basic, Rig Control System Tow hooks Central hydraulic test station
Central lube system Component drain system 8k winch for loading drill rod
Ground level fast service Strobe lights for the tower and cab Ground level battery isolation and
Ground level drain Buddy/trainee seat jump start
Cab activated horn Filter rack Valve rack
A selection of features on Pit Viper 311 Series
For a more comprehensive options list, please contact your local Atlas Copco Customer Center.
Copyright 2013, Atlas Copco Drilling Solutions LLC, Garland, TX 75040, USA. All product names in this publication are trademarks of Atlas Copco. Any unauthorised use or copying of the contents
or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings. lllustrations and photos in this brochure may show equipment with optional
length doors provide easy will be installed on the non-drill configured variously to perform a operating in extremely cold,
access for service and end for a tramming view. A color variety of rotary or DTH drilling ambient conditions. Several
maintenance. display will be mounted inside operations, and is designed to options are available that,
the cab. significantly save on fuel costs. if fully utilized, allow the
Its available on both high-and-low drill to operate in arctic
pressure airends. conditions.
extras. Specifications and equipment subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
Technical data PV-311
Width 25 ft 4 in 7.7 m
10 3/4" (273 mm) 12 1/4" 8" BECO
Dimensions tower down
*Maximum hole depth only achieved with certain pipe sizes and
Length 99 ft 30.2 m wall thickness
Height 29 ft 8.8 m
www.atlascopco.com/blastholedrills