Beruflich Dokumente
Kultur Dokumente
LRFD Simon
Version 10.2.0.0 2017-02-08 11:33
TABLE OF CONTENTS
l Secondary Level Input Parameters
Analysis Results
Section Evaluation
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 2 of 30
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 3 of 30
Span: 1
Point Girder Other DC1 Comp DL Utility FWS
0.0 0.0 0.0 0.0 0.0 0.0
0.1 15.9 129.8 19.3 0.0 17.7
0.2 26.9 219.3 32.5 0.0 29.9
0.3 32.9 268.4 39.8 0.0 36.6
0.4 34.0 277.3 41.1 0.0 37.8
0.5 30.1 245.8 36.5 0.0 33.5
0.6 21.3 174.0 25.8 0.0 23.7
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 4 of 30
Span: 2
Point Girder Other DC1 Comp DL Utility FWS
0.0 -63.2 -516.4 -76.6 0.0 -70.4
0.1 -28.5 -232.9 -34.5 0.0 -31.7
0.2 -1.5 -12.4 -1.8 0.0 -1.7
0.3 17.8 145.1 21.5 0.0 19.8
0.4 29.3 239.6 35.5 0.0 32.6
0.5 33.2 271.1 40.2 0.0 36.9
0.6 29.3 239.6 35.5 0.0 32.6
0.7 17.8 145.1 21.5 0.0 19.8
0.8 -1.5 -12.4 -1.8 0.0 -1.7
0.9 -28.5 -232.9 -34.5 0.0 -31.7
1.0 -63.2 -516.4 -76.6 0.0 -70.4
Span: 1
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.1 519.8 -82.0 0.0 0.0 519.8 -82.0 213.4 -32.8
0.2 874.7 -164.1 0.0 0.0 874.7 -164.1 344.7 -65.5
0.3 1074.2 -246.1 0.0 0.0 1074.2 -246.1 423.1 -98.3
0.4 1166.1 -328.2 0.0 0.0 1166.1 -328.2 444.8 -131.1
0.5 1147.7 -410.2 0.0 0.0 1147.7 -410.2 406.9 -163.8
0.6 1043.1 -492.2 0.0 0.0 1043.1 -492.2 398.6 -196.6
0.7 821.3 -574.3 0.0 0.0 821.3 -574.3 324.7 -229.4
0.8 505.8 -753.8 0.0 0.0 505.8 -753.8 201.7 -262.1
0.9 224.5 -886.2 0.0 0.0 224.5 -886.2 93.4 -294.9
1.0 180.6 -1203.4 0.0 0.0 180.6 -1203.4 68.2 -342.9
Span: 2
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 180.6 -1203.4 0.0 0.0 180.6 -1203.4 68.2 -342.9
0.1 250.1 -732.8 0.0 0.0 250.1 -732.8 109.3 -214.1
0.2 570.2 -532.6 0.0 0.0 570.2 -532.6 234.9 -182.8
0.3 927.9 -416.4 0.0 0.0 927.9 -416.4 381.9 -151.4
0.4 1146.8 -352.0 0.0 0.0 1146.8 -352.0 460.3 -120.0
0.5 1204.5 -287.7 0.0 0.0 1204.5 -287.7 464.6 -88.6
0.6 1146.8 -352.0 0.0 0.0 1146.8 -352.0 460.3 -120.0
0.7 927.9 -416.4 0.0 0.0 927.9 -416.4 381.9 -151.4
0.8 570.2 -532.6 0.0 0.0 570.2 -532.6 234.9 -182.8
0.9 250.1 -732.8 0.0 0.0 250.1 -732.8 109.3 -214.1
1.0 180.6 -1203.4 0.0 0.0 180.6 -1203.4 68.2 -342.9
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 5 of 30
Span: 1
Point Girder Other DC1 Comp DL Utility FWS
0.0 3.1 25.0 3.7 0.0 3.4
0.1 2.2 18.3 2.7 0.0 2.5
0.2 1.4 11.6 1.7 0.0 1.6
0.3 0.6 4.8 0.7 0.0 0.7
0.4 -0.2 -1.9 -0.3 0.0 -0.3
0.5 -1.1 -8.6 -1.3 0.0 -1.2
0.6 -1.9 -15.3 -2.3 0.0 -2.1
0.7 -2.7 -22.0 -3.3 0.0 -3.0
0.8 -3.5 -28.8 -4.3 0.0 -3.9
0.9 -4.3 -35.5 -5.3 0.0 -4.8
1.0 -5.2 -42.2 -6.3 0.0 -5.8
Span: 2
Point Girder Other DC1 Comp DL Utility FWS
0.0 5.1 42.0 6.2 0.0 5.7
0.1 4.1 33.6 5.0 0.0 4.6
0.2 3.1 25.2 3.7 0.0 3.4
0.3 2.1 16.8 2.5 0.0 2.3
0.4 1.0 8.4 1.2 0.0 1.1
0.5 0.0 0.0 0.0 0.0 0.0
0.6 -1.0 -8.4 -1.2 0.0 -1.1
0.7 -2.1 -16.8 -2.5 0.0 -2.3
0.8 -3.1 -25.2 -3.7 0.0 -3.4
0.9 -4.1 -33.6 -5.0 0.0 -4.6
1.0 -5.1 -42.0 -6.2 0.0 -5.7
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 6 of 30
Span: 1
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 91.2 -12.4 0.0 0.0 91.2 -12.4 42.8 -5.5
0.1 76.9 -12.6 0.0 0.0 76.9 -12.6 35.6 -5.5
0.2 63.3 -17.1 0.0 0.0 63.3 -17.1 28.7 -7.2
0.3 50.6 -25.9 0.0 0.0 50.6 -25.9 22.5 -11.4
0.4 38.9 -34.9 0.0 0.0 38.9 -34.9 17.3 -15.6
0.5 28.4 -46.5 0.0 0.0 28.4 -46.5 13.4 -19.7
0.6 20.2 -59.0 0.0 0.0 20.2 -59.0 9.8 -24.9
0.7 13.5 -71.4 0.0 0.0 13.5 -71.4 6.6 -30.3
0.8 7.8 -83.3 0.0 0.0 7.8 -83.3 3.8 -36.9
0.9 3.2 -94.6 0.0 0.0 3.2 -94.6 1.7 -43.3
1.0 2.7 -105.2 0.0 0.0 2.7 -105.2 1.1 -49.1
Span: 2
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 107.3 -10.0 0.0 0.0 107.3 -10.0 50.5 -4.2
0.1 94.5 -10.2 0.0 0.0 94.5 -10.2 44.0 -4.2
0.2 81.0 -11.7 0.0 0.0 81.0 -11.7 37.1 -4.9
0.3 67.1 -19.2 0.0 0.0 67.1 -19.2 30.0 -8.5
0.4 53.4 -28.4 0.0 0.0 53.4 -28.4 23.0 -12.5
0.5 40.4 -40.4 0.0 0.0 40.4 -40.4 16.8 -16.8
0.6 28.4 -53.4 0.0 0.0 28.4 -53.4 12.5 -23.0
0.7 19.2 -67.1 0.0 0.0 19.2 -67.1 8.5 -30.0
0.8 11.7 -81.0 0.0 0.0 11.7 -81.0 4.9 -37.1
0.9 10.2 -94.5 0.0 0.0 10.2 -94.5 4.2 -44.0
1.0 10.0 -107.3 0.0 0.0 10.0 -107.3 4.2 -50.5
Span: 1
(A) (B) (C) (B+C) (A+B+C)
Point Steel Only Other Composite Total Total
Noncomp DL DL (no DW) (No Steel) (w/ steel)
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 7 of 30
Span: 2
(A) (B) (C) (B+C) (A+B+C)
Point Steel Only Other Composite Total Total
Noncomp DL DL (no DW) (No Steel) (w/ steel)
0.0 0.000 0.000 0.000 0.000 0.000
0.1 0.006 0.049 0.007 0.056 0.062
0.2 0.018 0.145 0.022 0.166 0.184
0.3 0.030 0.245 0.036 0.281 0.311
0.4 0.039 0.317 0.047 0.365 0.403
0.5 0.042 0.344 0.051 0.395 0.437
0.6 0.039 0.317 0.047 0.365 0.403
0.7 0.030 0.245 0.036 0.281 0.311
0.8 0.018 0.145 0.022 0.166 0.184
0.9 0.006 0.049 0.007 0.056 0.062
1.0 0.000 0.000 0.000 0.000 0.000
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 8 of 30
Unless Noted, the 7th Edition (2014) of the AASHTO LRFD Specification is used.
No interims are evaluated.
Span 1
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 9 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.579 25.5 2680.56 -138.6 86.17 -47.36
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 2449.0 86.17 -47.36
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1840.0 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -163.9 34.62* -15.57*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 655.0 34.62* -15.57*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -81.9 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 327.5 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.112 25.5 2680.56 433.5 4.04 2.60
DECK_POUR_1 (positive) 1.000 N/A 1.109 25.5 2680.56 436.0 4.20 2.70
DECK_POUR_2 (positive) 1.000 N/A 1.113 25.5 2680.56 433.6 4.06 2.61
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 10 of 30
14 6.10.1.6 0.467 Lateral stress in bottom flange shall not exceed 0.6 * Fy (Deck Pour 1)
14 6.10.3.2.1 0.451 Compression Flange Nominal Yielding (Deck Pour 1)
14 6.10.3.2.1 0.259 Compression Flange Local Buckling (Deck Pour 1)
14 6.10.3.2.1 0.317 Compression Flange Lateral Torsional Buckling (Deck Pour 1)
14 6.10.3.2.2 0.443 Tension Flange Nominal Yielding (Deck Pour 1)
14 6.10.1.6 0.479 Lateral stress in top flange shall not exceed 0.6 * Fy (Deck Pour 2)
14 6.10.1.6 0.467 Lateral stress in bottom flange shall not exceed 0.6 * Fy (Deck Pour 2)
14 6.10.3.2.1 0.449 Compression Flange Nominal Yielding (Deck Pour 2)
14 6.10.3.2.1 0.258 Compression Flange Local Buckling (Deck Pour 2)
14 6.10.3.2.1 0.314 Compression Flange Lateral Torsional Buckling (Deck Pour 2)
14 6.10.3.2.2 0.442 Tension Flange Nominal Yielding (Deck Pour 2)
14 6.10.4.2.2 0.858 Top Flange Service Limit State Permanent Deflections, Positive Flexure
14 6.10.4.2.2 0.858 Bottom Flange Service Limit State Permanent Deflections, Positive Flexure
14 6.10.7.2.2 0.914 Flexure, Noncompact, Composite, Positive Flexure, Top Flange
14 6.10.7.2.2 0.914 Flexure, Noncompact, Composite, Positive Flexure, Bottom Flange
14 6.10.7.3 1.173 Flexure - Composite, Positive Flexure, Ductility
14 6.10.2.2-1 0.667 Top flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Top flange b >= D/6
14 6.10.2.2-3 0.642 Top flange t >= 1.1*tw
14 6.10.2.2-1 0.667 Bottom flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Bottom flange b >= D/6
14 6.10.2.2-3 0.642 Bottom flange t >= 1.1*tw
14 6.10.9.3.2 0.133 Nominal Shear Resistance of Stiffened Web Interior Panel
14 6.6.1.2 0.636 Fatigue-I: Bottom Flange Base Metal - Cat A
14 6.6.1.2 0.927 Fatigue-I: Bottom Flange/Web Fillet Weld - Cat B
14 6.6.1.2 1.115 Fatigue-I: Trans Stiff Weld near Bottom Flange - Cat C'
14 6.6.1.2 0.927 Fatigue-I: Conn Pl at Bot Flange (Bolted) - Cat B
informational Minimum User Bottom Flange Thickness Encountered.
informational Minimum User Top Flange Thickness Encountered.
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 11 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.579 25.5 2680.56 -259.5 61.14 -69.59
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 2541.5 61.14 -69.59
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -57.6 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1908.7 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -204.8 20.57* -28.71*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 664.0 20.57* -28.71*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -102.4 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 332.0 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.112 25.5 2680.56 432.0 -3.02 -4.70
DECK_POUR_1 (positive) 1.000 N/A 1.109 25.5 2680.56 434.9 -2.93 -4.56
DECK_POUR_2 (positive) 1.000 N/A 1.113 25.5 2680.56 432.0 -3.02 -4.70
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 12 of 30
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 13 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.491 25.5 2680.56 -810.3 2.94 -153.31
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 1770.9 2.94 -153.31
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -551.0 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1323.3 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -327.7 -16.42* -70.41*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 532.2 -16.42* -70.41*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -163.9 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 266.1 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.750 25.5 2680.56 163.1 -19.97 -31.06
DECK_POUR_1 (positive) 1.000 N/A 1.750 25.5 2680.56 167.8 -19.96 -31.05
DECK_POUR_2 (positive) 1.000 N/A 1.750 25.5 2680.56 162.9 -20.05 -31.19
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 14 of 30
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 15 of 30
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 N/A N/A
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 N/A N/A
S to_top_of_top_flange in^3 -643 -643 -643 -643 N/A N/A
S to_bottom_of_bottom_flange in^3 643 643 643 643 N/A N/A
S to_top_of_slab in^3 -662 -662 N/A N/A N/A
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.491 25.5 2680.56 -3031.8 -47.38 -259.92
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -2291.0 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -514.4 -57.85* -133.15*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 102.3 -57.85* -133.15*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -257.2 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 51.2 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2680.56 -811.4 -42.66 -66.36
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2680.56 -776.2 -36.54 -56.84
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2680.56 -811.4 -42.66 -66.36
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 16 of 30
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
Span 2
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 N/A N/A
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 N/A N/A
S to_top_of_top_flange in^3 -643 -643 -643 -643 N/A N/A
S to_bottom_of_bottom_flange in^3 643 643 643 643 N/A N/A
S to_top_of_slab in^3 -662 -662 N/A N/A N/A
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 17 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.599 25.5 2680.56 -3031.8 262.95 34.17
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -2291.0 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -514.4 134.75* 52.70*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 102.3 134.75* 52.70*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -257.2 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 51.2 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2680.56 -811.4 65.94 42.39
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2680.56 -776.2 54.18 34.83
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2680.56 -811.4 65.94 42.39
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 18 of 30
14 6.10.4.2.2 1.068 Bottom Flange Service Limit State Permanent Deflections, Negative Flexure
14 6.10.4.2.2 0.855 Compression Flange Service Limit State Bend-Buckling, Negative Flexure
14 6.10.8.2.2 1.131 Flex Resist: discretely braced flange in comp, local buckling, Negative Flexure
14 6.10.8.2.3 1.131 Flex Resist: discretely braced flange in comp, LT buckling, Negative Flexure
14 6.10.8.1.2 1.131 Flexural Resistance: discretely braced flange in tension, Negative Flexure
14 6.10.2.2-1 0.667 Top flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Top flange b >= D/6
14 6.10.2.2-3 0.642 Top flange t >= 1.1*tw
14 6.10.2.2-1 0.667 Bottom flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Bottom flange b >= D/6
14 6.10.2.2-3 0.642 Bottom flange t >= 1.1*tw
14 6.10.9.3.2 0.406 Nominal Shear Resistance of Stiffened Web Interior Panel
14 6.10.3.3 0.102 Shear (Constructibility)
14 6.10.3.3 0.102 Shear (Deck Pour 2)
14 6.10.5.3 0.208 Special Fatigue Requirement for Webs
14 6.6.1.2 0.479 Fatigue-I: Top Flange Base Metal - Cat A
14 6.6.1.2 0.698 Fatigue-I: Top Flange/Web Fillet Weld - Cat B
14 6.6.1.2 0.931 Fatigue-I: Bearing Stiffener at Top Flange - Cat C'
informational Minimum User Bottom Flange Thickness Encountered.
informational Minimum User Top Flange Thickness Encountered.
SECTION at Span 2, 20.0 Percent (15.00 ft) - [field splice location, no plate change]
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 19 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.599 25.5 2680.56 -954.2 186.85 10.53
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 982.6 186.85 10.53
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -709.8 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 723.9 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -274.2 91.05* 28.05*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 352.4 91.05* 28.05*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -137.1 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 176.2 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2680.56 -19.5 39.62 25.47
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2680.56 -28.3 39.62 25.47
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2680.56 -19.5 39.62 25.47
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 20 of 30
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 21 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.000 25.5 2680.56 -454.8 134.54 -21.35
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 2107.7 134.54 -21.35
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -247.6 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1579.5 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -211.4 61.22* 5.05*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 623.5 61.22* 5.05*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -105.7 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 311.7 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.000 25.5 2680.56 288.5 22.04 14.17
DECK_POUR_1 (positive) 1.000 N/A 1.000 25.5 2680.56 279.7 22.04 14.17
DECK_POUR_2 (positive) 1.000 N/A 1.000 25.5 2680.56 288.5 22.04 14.17
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 22 of 30
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 23 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.000 25.5 2680.56 -169.4 70.70 -70.70
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 2593.9 70.70 -70.70
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1947.3 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -132.9 25.20* -25.20*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 696.9 25.20* -25.20*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -66.5 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 348.5 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.000 25.5 2680.56 426.0 0.00 0.00
DECK_POUR_1 (positive) 1.000 N/A 1.000 25.5 2680.56 417.2 0.00 0.00
DECK_POUR_2 (positive) 1.000 N/A 1.000 25.5 2680.56 426.0 0.00 0.00
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 24 of 30
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
S to_cg_of_reinforcement in^3 N/A
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 25 of 30
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.599 25.5 2680.56 -454.8 21.35 -134.54
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 2107.7 21.35 -134.54
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -247.6 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1579.5 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -211.4 -5.05* -61.22*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 623.5 -5.05* -61.22*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -105.7 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 311.7 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.750 25.5 2680.56 288.5 -14.17 -22.04
DECK_POUR_1 (positive) 1.000 N/A 1.750 25.5 2680.56 279.7 -14.17 -22.04
DECK_POUR_2 (positive) 1.000 N/A 1.750 25.5 2680.56 288.5 -14.17 -22.04
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 26 of 30
SECTION at Span 2, 80.0 Percent (60.00 ft) - [field splice location, no plate change]
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar Plate+nSlab Plate+3nSlab
(Other LS) (Other LS) (Strength (Strength
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 27 of 30
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 16888 16888
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -643 -643 -643 -643 -643 -643
S to_bottom_of_bottom_flange in^3 643 643 643 643 643 643
S to_top_of_slab in^3 -662 -662 N/A -662 -662
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.599 25.5 2680.56 -954.2 -10.53 -186.85
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2680.56 982.6 -10.53 -186.85
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -709.8 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 723.9 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -274.2 -28.05* -91.05*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 352.4 -28.05* -91.05*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -137.1 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 176.2 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2680.56 -19.5 -25.47 -39.62
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2680.56 -28.3 -25.47 -39.62
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2680.56 -19.5 -25.47 -39.62
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 28 of 30
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 29 of 30
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16888 16888 16888 16888 N/A N/A
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 N/A N/A
S to_top_of_top_flange in^3 -643 -643 -643 -643 N/A N/A
S to_bottom_of_bottom_flange in^3 643 643 643 643 N/A N/A
S to_top_of_slab in^3 -662 -662 N/A N/A N/A
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4310
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.599 25.5 2680.56 -3031.8 -34.17 -262.95
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -2291.0 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -514.4 -52.70* -134.75*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 102.3 -52.70* -134.75*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -257.2 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 51.2 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2680.56 -811.4 -42.39 -65.94
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2680.56 -776.2 -34.83 -54.18
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2680.56 -811.4 -42.39 -65.94
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017
Page 30 of 30
file:///C:/Users/lu_01/Desktop/bridge/final_bridge_output.xml 2/8/2017