Beruflich Dokumente
Kultur Dokumente
html
These are spherical markers, which are compliant with International Civil Aviation Organization (ICAO)
recommendations annex 14 chapter 6. These aerial marker balls displayed on an overhead wire, cable etc.
should not have a diameter less than 600mm. They should be of a single solid color. When installed, white
and red, or white and orange markers should be displayed alternately. The color selected should contrast
with the background against which it will be seen.
The aircraft warning spheres are made up of finest quality FRP and polished from both inside and
outside. Ultraviolet resistant pigment is infused with the FRP matrix to fasten the life of the colour. The resin
combinations are used in a manner to achieve the high strength to weight ratio to achieve a negligible
weight of the sphere.
Our warning spheres are composed of two hemispheres with aluminum alloy clamps. These clamps designed
depending on the clients earth wire dimensions. All other hardware is made from stainless steel and
provided with spring washers and lock nut which prevent the sphere from slipping. We also provide an easy-
to-install guide along with the instrument.
Drainage systems are provided in each of the hemisphere, which is necessary to prevent water accumulation
inside the sphere.
The warning spheres are available in the following colour combinations as per requirements of various
aviation regulations world wide.
ORANGE
WHITE
RED
Features
Ropeway cables
Guy Wires
Ropeway cables
Guy Wires
Technical Details
Night Drain Armour
Weight Dia.(mm) Material of Clamp Material of Sphere
Mode Holes Rod
ADMS 5.0 Kg Aluminum Alloy/ Fibre Reinforced
600 Provided Optional
600 Approx Galvanized Mild Steel Polyester
ADMS 5.0 Kg Aluminum Alloy/
600 Provided Optional Aluminum
600 Approx Galvanized Mild Steel