Beruflich Dokumente
Kultur Dokumente
PMT OPRNS
WYO SAUDI ARABIAN OIL COMPANY
DIVISION 3 - CONCRETE
NAD
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
SECTION 03100 - CONCRETE FORMWORK
ENGG CERT
KA
ALL
PART 1 - GENERAL
1.01 DESCRIPTION:
ISSUED FOR CONSTRUCTION
1.02 DESIGN:
Design of formwork is the responsibility of the Contractor. Conform to ACI
347R. When designing forms for long spans where intermediate supports are
not possible, figure anticipated form deflection due to weight of fresh concrete.
JO/EWO
1.03 REFERENCES:
34070
07-02
00
DATE:
07-02 A. Plywood Forms: APA grade-trademarked, USPS PS 1, B-B Plyform,
CONSTRUCTION Exterior Type, Class I, sealed edges, mill oiled and not less than 15 mm
AGENCY
N.A. AL-DAWOOD
thick.
07-02
DATE:
OPERATIONS
B. Lumber Forms: Sound lumber of uniform thickness, dressed, tongue
and grooved, free from loose knots and of such moisture content as to
W.Y. OSAILAN
prevent free absorption of moisture.
07-02
DATE:
C. Chamfer Strips: Shall be placed at all edges and corners of beams and
CONTROL NUMBER
VERIFICATION
pedestals which will be exposed in the finished work even though not
EDSD
approval.
APPROVAL/CERTIFICATION REQUIREMENTS,
750300-JO-2001-34070-001
THIS INDICATES THAT REV. NO.__________
REVISION CERTIFICATE
E. Form Oil: Non-staining type which will allow field applied paints to
(DCC) NO. _____________________
CONSTRUCTION SPECIFICATIONS (SEC.03100) DWG.TYPE PLANT NO. INDEX DRAWING NO. SHT.NO. REV.NO.
DOC 1
FIRE TRAINING CENTER
M57 A A RE-3407SP 00
OF
JUAYMAH SAUDI ARABIA JO / EWO: 34070 3
EDSD/2616-0399.doc
Saudi Aramco 2616-ENG (03/99)
PMT OPRNS
WYO SAUDI ARABIAN OIL COMPANY
F. Form Sealer: Type subject to SAUDI ARAMCO Representative's approval.
NAD
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
G. Form Accessories: Form ties, anchors and hangers of sufficient
ENGG CERT
KA
PART 3 - EXECUTION
Just before any concrete is poured, forms shall be thoroughly cleaned of all
sticks, boards, loose rocks, sand or other debris, and wetted down with clean
water to the satisfaction of the Saudi Aramco Representative. In tall narrow
JO/EWO
34070
forms "window" shall be provided on the bottom for cleaning out the forms.
DATE
3.02 ERECTION:
07-02
00
DISCIPLINE
place all concrete in temporary forms.
ENGINEER
07-02
ALL
B. Location
DATE:
PROJECT
ENGINEER 1. Plywood Forms: Erect plywood forms at surfaces exposed to
KHURSHID, A. view and elsewhere unless directed by SAUDI ARAMCO
DATE:
07-02
Representative at Contractor's option.
CERTIFIED
KHURSHID, A.
2. Lumber Forms: Use only at surfaces not exposed to view.
07-02
DATE:
CONSTRUCTION
AGENCY 3. Metal Forms: Location subject to SAUDI ARAMCO Representative's
N.A. AL-DAWOOD approval.
07-02
DATE:
OPERATIONS
W.Y. OSAILAN C. Construction
07-02
DATE:
1. Forms shall conform to the shape, lines and dimensions of the
CONTROL NUMBER
VERIFICATION
placed at all edges and corners of beams and columns which will be
(DCC) NO. _____________________
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
deformation or settlement.
ENGG CERT
KA
2. Inserts, Anchors and Sleeves: Install all inserts, anchors and sleeves
including those required and furnished by other trades. All inserts,
ALL
3.03 REMOVAL:
DESCRIPTION
3.04 TOLERANCES:
End of Section
JO/EWO
34070
DATE
07-02
NO.
REV
00
DISCIPLINE
ENGINEER
ALL
07-02
DATE:
PROJECT
ENGINEER
KHURSHID, A.
07-02
DATE:
CERTIFIED
KHURSHID, A.
07-02
DATE:
CONSTRUCTION
AGENCY
N.A. AL-DAWOOD
07-02
DATE:
OPERATIONS
W.Y. OSAILAN
07-02
DATE:
CONTROL NUMBER
VERIFICATION
EDSD
DATE:
BY:
APPROVAL/CERTIFICATION REQUIREMENTS,
750300-JO-2001-34070-001
THIS INDICATES THAT REV. NO.__________
REVISION CERTIFICATE
CONSTRUCTION SPECIFICATIONS (SEC.03100) DWG.TYPE PLANT NO. INDEX DRAWING NO. SHT.NO. REV.NO.
DOC 3
FIRE TRAINING CENTER
M57 A A RE-3407SP 00
OF
JUAYMAH SAUDI ARABIA JO / EWO: 34070 3
EDSD/2616-0399.doc