Beruflich Dokumente
Kultur Dokumente
KVC Fire-safe and Anti-Static ASME 150/300 one piece, end entry,
FEATURES
200
207
213
300
218
258
217
206
204
203
301 004
300
205
532
101 100
001 101 001
100
002
003
seat detail
100
001
101
102
104
137 106
2
UNIBODY FLOATING BALL VALVES
PARTS LIST
No. Description Carbon steel
001 Body ASTM A216-WCB/WCC Dual certified
002 Body insert ASTM A216-WCB/WCC Dual certified
003 Body insert seal Virgin PTFE
004 Stop screw DN 15-50 (NPS - 2) UNS S31600
004 Stop pin DN 80-200 (NPS 3 - 8) Alloy steel
023 Stop pin spacer DN 15-50 (NPS - 2) UNS S31600
026 Firesafe body seal DN 15 (NPS - 1) only Flexible graphite
100 Ball UNS S31600
101 Seat (Code E - Cantilevered) PTFE/PFA copolymer
Seat (Code G - Cantilevered) Carbon reinforced PTFE
200 Stem (Standard) UNS S31600
Stem (High strength) (Optional - UNS S17400)
201 Primary shaft seal DN 50-200 (NPS 2-8) Glass reinforced PTFE
202 Firesafe shaft seal Flexible graphite
203 Primary stem seal DN 15-40 FKM
204 Stem thrust washer DN 15-25 (NPS - 1) Glass reinforced PTFE
205 Stop plate DN 80-200 (NPS 3 - 8) UNS S31600
206 Stem spring Inconel
207 Stem nut UNS S31600
213 Gland DN 15-25 (NPS - 1) UNS S31600
217 Gland packing DN 15-25 (NPS - 1) Flexible graphite
223 Shaft seal follower DN 40-200 (NPS 1 - 8) UNS S31600
235 Aux. stem seal DN 40-200 (NPS 1 - 8) Virgin PTFE
251 Weather seal DN 40-200 (NPS 1 - 8) Comp. carbon fiber
258 Lock washer DN 15-50 (NPS - 2) UNS S31600
300 Lever DN 15-50 (NPS - 2) UNS S31600
Lever DN 80-200 (NPS 3 - 8) Carbon steel zinc plated
(Optional - UNS S31600)
301 Lever retainer Carbon steel zinc plated
(Optional - UNS S31600)
303 Lever head DN 80-200 (NPS 3 - 8) S.G. iron (prime coated)
(Optional - UNS S31600)
532 Anti-Static device DN 80-200 (NPS 3 - 8) UNS S31600/Monel 400
3
UNIBODY FLOATING BALL VALVES
NOTES
F = The lever dimension when the handle is in the extended position.
H = The diameter of the stem connection.
G = The dimension across the stem flats.
K v = The flow rate of water in m 3/hr that will pass through a valve with a pressure drop of 1 bar (100 kPa) and 20C.
Cv = 1.155 K v K v = C v/1.155
# = Metric shaft keyway is used on DN 150 and DN 200 valves.
Dimensions are nominal to 1 mm.