Beruflich Dokumente
Kultur Dokumente
html
(http://red-bag.com/)
Home (/) Software (/software.html)
Demo (/demo.html)
(/free-engineering-tools.html)
The Tube Sheet Lay-out page facilitates the calculation of the amount of tubes. The calculation
can be done for four (4) pitch patterns (how the tubes are laid out) and for ten (10) types of
passes (tube compartments).
2 of 5 2/28/2017 3:31 PM
Free Engineering Tools http://www.red-bag.com/free-engineering-tools.html
Flange Dimensions
(/ ange-dimension.html)Flanges are used on equipment
for the nozzles and in piping systems. The flanges are
bolted together with a gasket in between to prevent
leackage. The dimensions of flanges in piping systems and
also the smaller flanges on equipment are standardized.
Equipment such as pressure vessels can also have
so-called body flanges. These flanges are specially made
for the diameter of the equipment and are designed and
calculated individually.
Pipe Dimensions
(/pipe-dimension.html)Pipes are standard components
used in process plants. The dimensions (wall thickness) are
standardized. The below figure gives the legend for the
dimensions used on the Pipe Dimension page.
Material Properties
Material properties are necessary for the strength calculations of components and equipment in
the process industry. The material properies page on this website is only for reference and
order of magnitude when using the head and shell calculation pages.
The data for the material database comes from an out-of-date listing of materials and is for
demonstration purposes only. The figures from the material properties pages can not be used
3 of 5 2/28/2017 3:31 PM
Free Engineering Tools http://www.red-bag.com/free-engineering-tools.html
for actual strength calculations.
Provide a tag (or equipment) number and optionally a name to identify the subject item
Indicate the type of equipment which will define one of the three table groups (1,2,3,4 or 5
or 6,7,8,9)
Only for the pressure accessory it is required to indicate the assessment background
(volume or nominal size of pipe)
Select the fluid state and group, this will define the applicable table
Enter the maximum pressure, maximum temperature (is sometimes required for example
generators), the volume (for equipment and accessories) or the nominal diameter DN (for
piping and accessories)
The additional information is required to be selected where applicable to determine possible
exceptions to the classification tables
Prev (/overview-of-library.html)
(/contact.html) (http://www.iniped.com/)
4 of 5 2/28/2017 3:31 PM
Free Engineering Tools http://www.red-bag.com/free-engineering-tools.html
(http://red-bag.com
/overview-of-library.html)
(/home/538-2008-03-28-
new-book-gulf-publishing-
company.html)
5 of 5 2/28/2017 3:31 PM