0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
16 Ansichten3 Seiten
This document provides setup information for a wire EDM project cutting a box-shaped stock piece out of material. The project is named "ABC Test Project" for customer ABC Manufacturing. It involves one contouring operation to cut a 98.7845 path length using a 0.012 diameter wire with a 5.0 degree taper and 0.5 land height. Power settings are specified from the WIRE_INCH.POWER library.
This document provides setup information for a wire EDM project cutting a box-shaped stock piece out of material. The project is named "ABC Test Project" for customer ABC Manufacturing. It involves one contouring operation to cut a 98.7845 path length using a 0.012 diameter wire with a 5.0 degree taper and 0.5 land height. Power settings are specified from the WIRE_INCH.POWER library.
This document provides setup information for a wire EDM project cutting a box-shaped stock piece out of material. The project is named "ABC Test Project" for customer ABC Manufacturing. It involves one contouring operation to cut a 98.7845 path length using a 0.012 diameter wire with a 5.0 degree taper and 0.5 land height. Power settings are specified from the WIRE_INCH.POWER library.
GENERAL INFORMATION PROJECT NAME: ABC Test Project CUSTOMER NAME: ABC Manufacturing Company PROGRAMMER: John Barker DRAWING: 12345 REVISION: 2 DATE: Friday, February 05, 2010 TIME: 06:49 AM
WIRE.MCX-5
COMMENTS STOCK / SAFEZONE INFO
STOCK: YES SAFEZONE: NO
SHAPE: Box SHAPE: NA SIZE: 4.49629, 3.50237, 1.0 SIZE: NA RADIUS: NA RADIUS: NA LENGTH: NA LENGTH: NA AXIS: NA AXIS: NA FILE: NA IDN: NA WIRE.NCI OPERATION LIST OPERATION INFO Wire Contour, op_idn #1