Beruflich Dokumente
Kultur Dokumente
Travel 3.0 inches (76.2mm) 3.5 inches (88.9 mm) 4.5 inches (114.3 mm)
Rotational Drive System
Pneumatic motor 3.0 hp (2.2 kW) 3.0 hp (2.2 kW) 3.0 hp (2.2 kW)
Recommended air pressure 90 PSI (6.2 Bar) 90 PSI (6.2 Bar) 90 PSI (6.2 Bar)
Recommended volume 65 CFM (1.9 m3/min) 65 CFM (1.9 m3/min) 65 CFM (1.9 m3/min)
Hydraulic motor 4.6 hp (3.4 kW) 5.36 hp (4.0 kW) 5.36 hp (4.0 kW)
8 GPM@1500 PSI 14.8 GPM @ 1700 PSI 14.8 GPM @ 1700 PSI
Pump requirements
(30 lpm @ 103 Bar) (56 lpm @ 117 Bar) (56 lpm @ 117 Bar)
Speed 0 40 RPM 0 30 RPM 0 26 RPM
Measures
Machine weight
Pneumatic
Complete machine 44 lbs (19.9 kg) 50.5 lbs (22.9 kg) 89 lbs (40.3 kg)
Machine without mandrel 36 lbs (16.3 kg) 40.5 lbs (18.4 kg) 69 lbs (31.3 kg)
Electric
Complete machine 52 lbs (23.5 kg) 57.5 lbs (26 kg) 97 lbs (43.9 kg)
Machine without mandrel 44 lbs (20.0 kg) 47.5 lbs (4.5 kg) 77 lbs (34.9 kg)
Mandrel 8 lbs (3.6 kg) 10 lbs (4.5 kg) 20 lbs (9.4 kg)
Shipping weight
Complete machine, pneumatic 120 lbs 132 lbs (59.9 kg) 170 lbs (77.1 kg)
Complete machine, electric 128 lbs 140 lbs (63.5 kg) 178 lbs (80.7 kg)
Dimensions
20 x 10.5 x 25 inches 21 x 12 x 23 inches 23 x 12.5 x 25 inches
Length (L x W x H)
(508 x 266.7 x 635 mm) (533.4 x 304.8 x 584.2 mm) (533.4 x 317.5 x 635 mm)
Crate dimensions (L x W x H) 28 x 24 x 11 inches 28 x 12 x 15 inches 28 x 16 x 15 inches
(711.2 x 609.6 x 279.4 mm) (711.2 x 304.8 x 381 mm) (711.2 x 406.4 x 381 mm)
APPLICATIONS
The Pipe Bevelers are used by
these industries Typical Applications:
Power Generation Chemical Processing Plants Pipe Lines
Fossil-Fuel Power Stations Oil Refineries Tube Repair
Gas Turbine Power Plants Ship Yards Valve and Fittings
Pulp and Paper Plants Water and Wastewater Treatment Coupling Repair
All dimensions should be considered reference. Contact your H&S Tool Representative for precision dimensions. Specifications are subject to change without notice. Acutal results for test data may
vary depending on setup, machining conditions and machine maintenance There are no systems or components on this machine that are capable of producing hazardous EMC, UV or other radiation
hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
OPTION 1 PB6 POWER BEVELER Working range 1.7 ID 7 OD inch (43.2 ID 177.8 OD mm)
OPTION 2 PB8 POWER BEVELER Working range 2 ID 8.625 OD inch (50.8 ID 219.1 OD mm)
OPTION 3 PB12 POWER BEVELER Working range 3 ID 14 OD inch (76.2 ID 355.6 OD mm)
1
Install the three wedge
extensions.
2
Mount the machine on the
work piece. Be aware of the
wedges position in the work
piece; allow enough material
for the application. Tighten
the wedge system by turning
the feed barrel.
3
Install the blades in the tool
holder 180 apart. Position
the blades for cutting by
turning the feed handle.
&
Copyright 2016 CLIMAX | H&S Tool. All Rights Reserved. CLIMAX | H&S Tool has
taken reasonable measures to ensure the accuracy of the information contained in
this document. However, CLIMAX | H&S Tool makes no warranties or representations
with respect to the information contained herein; and CLIMAX | H&S Tool shall not
be held liable for damages resulting from any errors or omissions herein, or from the
use of the information contained in this document.