Beruflich Dokumente
Kultur Dokumente
1. Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify
diameter of circle <38.0000>: 475
2. Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify
diameter of circle <38.0000>: 437.5
3. Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify
diameter of circle <38.0000>: 400
4. Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify
diameter of circle <38.0000>: 338
5. Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify
diameter of circle <38.0000>: 276
6. Command: enter
langkah pembuatan garis tengah dan pembuatan lingkaran kecil pada sudut 45 0
1. Command: _line Specify first point: cen of Specify next point or [Undo]: @300<0
2. Command: LINE Specify first point: Specify next point or [Undo]: @300<90
3. Command: _copy 1 found Specify base point or displacement, or [Multiple]: Specify second
point of displacement or <use first point as displacement>: @56<90
4. Command: _copy 1 found Specify base point or displacement, or [Multiple]: Specify second
point of displacement or <use first point as displacement>: @56<0
5. Command: _line Specify first point: Specify next point or [Undo]: @300<45
6. Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify
radius of circle or [Diameter] <138.0000>: d
7. Specify diameter of circle <276.0000>: 38
8. Command: enter.
1. Command: _mirror
Select objects: Specify opposite corner: 15 found
Select objects:
2. Specify first point of mirror line: Specify second point of mirror line:
Delete source objects? [Yes/No] <N>: n
Command: enter
DISUSUN OLEH :
NAMA : HENDRA GINTING
NIM : 1205012162
KELAS : ME- 2E