Beruflich Dokumente
Kultur Dokumente
ARCHITECTURAL PRODUCTS
www.luxalon.com
T I L E S SYSTEM OVERVIEW CLIP-IN 3MM BEVEL
ISO 9002
SHORT SYSTEM DESCRIPTION
Lloyds Quality
Assured Firm
C L I P -I N 3 M M B E V E L C L I P -I N 3 M M B E V E L
T I L E - O P T I O N S S W I N G D O W N
Module in mm Gauge: steel Alu. Module in mm Gauge: steel Alu.
600 x 600 0.5 0.6 600 x 600 0.6 0.6
625 x 625 0.5 0.6 625 x 625 0.6 0.6
300 x 600 0.5 0.6
312.5 x 625 0.5 0.6
300 x 1200 0.5 0.6
40
10
M AT E R I A L R E Q U I R E M E N T PER M2 MATERIAL SPECIFICATIONS
Components Unit 600x600 625x625
Tiles pcs 2,78 2,56 - B A S E M AT E R I A L
Clip-In Rail m1 2,50 2,43 Luxalon Clip-In tiles are available in
Rail Connector pcs 1,39 1,34 electrolytic-galvanised steel,
Rail Splice pcs 0,50 0,49 phosphatised and chemically treated in
Suspension pcs 0,67 0,67 accordance with high industrial
standards (DIN 1541/BS 1449, part
DOWNWARD ACCESSIBILITY 1:1983/TAIM standards). Zinc coating
is double sided and 2.5 microns.
Although installed to a concealed grid system, each panel can be removed individu- Aluminium alloy AL 99.5RA,
ally. Individual tiles can easily be released from the grid-profiles with a simple tool 3/4 hard (according to DIN 1783) or
that is inserted between adjacent tiles on both edges combined with downward stainless steel alternatives are also
pressure. possible, when required.
For frequent accessibility, Swing-Down Clip-In tiles can be included in the ceiling - C O AT I N G
design. These access tiles are self-locking and self-locating, and they are released The tough and durable polyester pow-
with minimal effort. dercoating finish in a minimal thick-
ness of 60 microns, is electrostatically
ACOUSTIC PERFORMANCE applied ensuring uniform coating
thickness, absolute adhesion, maxi-
In order to improve interior sound control, the Luxalon Tile and Plank programme mum resistance to abrasion. Because
can be perforated in a range of standard patterns with open areas between 16% and Luxalon coatings are applied after per-
60%. These patterns are framed with a solid border of 10 mm in order to assure foration and bending process, exposed
maximum flatness and product stability. As a standard feature, perforated tiles can edges are protected. Standard gloss rate
o
be supplied with a sound absorbing non-woven tissue glued into the tile for is 15 - 20% at 60 angle of incidence.
enhanced acoustical performance.
- COLOUR RANGE
SOUND ABSORPTION Freq. Hz 125 250 500 1000 2000 4000 The standard colours range includes a
Curve 1 0.31 0.68 0.87 0.74 0.95 0.96
C U RV E 1 Curve 2
Curve 3
0.51
0.48
0.77
0.97
0.92
1.07
0.72
0.97
0.80
1.06
0.80
1.08 range of whites and a metallic silver
2.5 mm perforated tiles, 20 mm thick mineral wool pad
with a density of approx. 20 kg/m, plenum depth 200 mm. 1.2
Absorption Coefficient GS 391/88/e
colour. Any other RAL, BS or NCS
3
C U RV E 2 1
colour is available on request.
2.5 mm perforated tiles, non-woven acoustic felt, plenum 1
- F I R E B E H AV I O U R
Suspended Luxalon metal ceilings are
classified incombustible, and will
therefore not contribute to possible
2.4 mm 1.5 mm 3 mm 4 mm 1,8 mm / 10 mm
3
fires. When ceilings however need to
16 % open 22% open 20% open 28% open 20% open 60% open
b 5.5 n 5.5 b 2.15 n 4.3 b 5.5 n 6.35 b 6.5 n 6.5 b 2.5 n 5 b 13.4 n 13.4 protect the structural integrity of a
building, Luxalon ceilings offer a wide
Note: Perforated products have a nominal plain border of 10 mm. range of practical solutions with
regards to fire resistance and fire stabil-
ity. Further information is available on
request.
S PECIFICATION TEXTS 3.3 ACOUSTICS
Manufacturer shall supply
acoustic non-woven textile,
P A RT 1. G E N E R A L thickness 0.2 mm glued into
the tiles or black faced PE
1.1 INTRODUCTION wrapped mineral wool thickness
____ mm density ____ kg/m3
Supply and fix Luxalon Clip-In Tile Ceiling System as manufactured by and of a size to completely fill
Hunter Douglas Architectural Products. the tile.
2.2 P R I M A RY SUSPENSION
3.5 INSTALLATION
Rows of 0.5 mm galvanized steel common profiles shall be installed at All materials shall be installed
1200 mm centres by means of ___ mm high rod hangers or nonius in strict compliance with all
hangers fixed to the upper structure at a maximum distance of 1250 local codes, ordinances and
mm centre to centre. Primary suspension profiles will be fixed at both manufacturers recommen-
ends to the wall to prevent upward movement. dations including specific
additional requirements as
2.3 S E C O N D A RY SUSPENSION may be called for in the
specifications or shown on the
Luxalon Clip-In profiles shall be fastened to the primary suspension by drawings.
means of cross connectors at the correct distance to support the tiles.
3.6 SUBSTITUTIONS
P A RT 3. A D D I T I O N A L S P E C I F I C AT I O N S Ceiling installers wishing to
submit proposals on systems www.luxalon.com
3.1 EDGE COVER PROFILES other than the Luxalon Tile
L-profile 25 x 25 mm, made of 1.5 mm thick aluminium. Ceiling System shall, at least
W-profile, 25 x 25 x 25 x 25 mm, made of 1.5 mm thick aluminium. 10 days in advance of the bid
F-profile, 25 x 25 mm, made of 1.5 mm thick aluminium. date, submit to the architect
Stepped F-profile, 25 x 25 x 25 x 25 mm, made of 1.5 thick aluminium. complete descriptive informa-
tion of the total system concept
and performance data tests
made as a system. In addition
3.2 PERFORATIONS include a list of similar installa-
Manufacturer shall supply tiles with perforation pattern no. ________ tions of the proposed substitu-
with a nominal 10 mm plain border on all sides. tion. If approval is made an
Perforations will have a ________ diameter hole resulting in a _____ % addendum will be issued
open area. Other borders on request. enumerating such approved
system as herein set forth.