Beruflich Dokumente
Kultur Dokumente
Version 7
Date July 1, 2013
Information
Roaming - Technical
Category
Unrestricted
This document is subject to copyright protection. The GSM MoU Association (Association)
makes no representation, warranty or undertaking (express or implied) with respect to and
does not accept any responsibility for, and hereby disclaims liability for the accuracy or
completeness or timeliness of the information contained in this document. The information
contained in this document may be subject to change without prior notice. Access to and
distribution of this document by the Association is made pursuant to the Regulations of the
Association.
Document History
Version Brief Date
Description
Draft Issues For Ad Hoc group discussion Oct - Dec 1991
1 INTRODUCTION
1.1 Scope of Document
This document is the specification of IREG End-to-end Functional Capability tests relating to the international roaming of a Mobile Station, belonging to a home PLMN(a), to and within a visited
PLMN(b). This document also covers IREG test cases for CS Fallback.
Whilst it is expected that roaming will be a bilateral activity between two PLMNs, please note that this document is written in a unidirectional context. Hence Roaming is taking place by a MS(a) to
VPLMN(b) only. There is no reference to a Mobile Station MS(b) visiting PLMN(a).
To complete IREG End-to-end Functional Capability tests for bilateral roaming, it is necessary to perform the tests in this document twice: the second time the real identities of PLMN(a) and
PLMN(b) are swapped.
IREG Document PRD IR23 defines the scope and purpose of each stage of testing.
SCCP testing
Exchange of PLMN numbering, addressing and routing data [see Stage 3: IREG PRD IR23]
Testing of Transferred Account Procedure, billing applications and any inter-PLMN financial statement; [see TADIG PRD TD06]. However the production of a Toll Ticketing file, for use in the
TADIG Stage 3 testing is included.
Definition of operation and maintenance procedures such as contact points for fault reporting and notification of planned works. [see Stage 3: IREG PRD IR23]
The Scope of this issue of the document extends to GSM Association Phase 1 services only.
1.2. Abbreviations
PLMN ("Public Land Mobile Network") including RSS ("Radio Sub-System") and NSS ("Network Sub-System"). PLMN (a) indicates the "ath" PLMN.
VPLMN ("Visited PLMN")
HPLMN ("Home PLMN")
HLR ("Home Location Register")
VMSC ("Visited Mobile Services Switching Centre"), including the always co-located entities MSC ("Mobile Services Switching Centre") and VLR ("Visitor Location Register")
The fundamental objective of this testing is to confirm the capability, and sample the quality of service which GSM users will receive when roaming from their Home PLMN (a) to PLMN (b).
Consequently the tests are restricted to top-level capability testing. There is no provocative or inopportune behavior testing: this type of testing forms part of the Stage 1 testing [see IREG PRD
IR23].
Because the testing is at a top-level, its scope includes checking the correct working of user features and any network features required by the HPLMN (e.g. barring). The scope also includes the
confirmation of acceptable quality of transmission, absence of echo and call set-up delay.
The overall objective of the tests is to confirm that the functions and features, which are already known to operate correctly within each separate PLMN, will also operate correctly for Inter-PLMN
roaming.
When there is no difference in a PLMN's operation between Home and Visiting MSs, then there is no requirement to confirm successful operation during Stage 3 Testing - an example of this is
"handover." In addition where a feature involves only the Gateway MSC and HLR, (both located in the HPLMN), then there is no requirement to test during Stage 3.
(a) "Location updating" and the associated "Inserting of Subscriber data" can be successfully completed for MS (a) roaming to PLMN (b). In addition, that the "cancel location"
service operates correctly.
(b) Incoming speech calls to MS (a) can be handled by:
(i) HPLMN(a) asking for Roaming Number from VPLMN (b)
(ii) HPLMN(a) successfully routing the call
(iii) VPLMN(b) connecting the call
(d) Supplementary Services can be registered and activated, and their status interrogated by the MS (a).
(h) Short Message Service is available between Home Country Service Centre and roamed mobile station.
(i) Incoming and Outgoing CS Fallback calls, SMS over SGs/S102 can be made successfully
If either the HPLMN or VPLMN contain GSM Network / CS Fallback Entities which are supplied by more than one manufacturer, then the test cases should be repeated for each manufacturer.
Therefore if HPLMN(a) contains HLR and GMSC from "m" suppliers, and the VPLMN(b) contains VMSC from "n" suppliers, then potentially the tests should be performed m*n times. The actual
number of repeats of the test cases is for bilateral agreement between the HPLMN and VPLMN. However if agreement is not straightforward, it is for the HPLMN to decide the scope of the
repeating of test cases, because it is ultimately responsible to its customers for the service supported when roaming.
An associated optional objective is to use the Toll Ticketing function of the VMSC to generate a live data file, which is used by the TADIG Stage 3 testing. After transfer to the HPLMN via TADIG
processes, the HPLMN may use the information from the test results to validate the details of the Toll tickets, however this is not part of the GSM Association IREG roaming testing.
In order to maximize the efficiency of testing, the test cases have been drawn up so as to minimize the requirement for simultaneous joint activity by both PLMN (a) and PLMN (b).
It is recognized that some parts of this specification are of greater priority than others. The test cases concerning the Basic Service" (Section 2.1) are of greater priority than those for the
Supplementary Services (Section 2.2).
It is anticipated that further updated issues will be made in response to IREG comments and following experience of testing.
It is anticipated that further Issues will be needed to extend the testing beyond GSM phase 1.
The Equipment described in this Section is necessary for undertaking the test cases described in Section 2.
It is expected that manual selection will be used to select VPLMN(b) when using the SIMs supplied by HPLMN(a). To facilitate subsequent automatic selection it is required that
bits b6 and b5 of byte 2 of the SIM Service Table (Data-field 38) be set to "1", and the chosen VPLMN is in the PLMN Selector (Data-field 30)
In order to replicate the service that general roamers will encounter, it is required that any SIM used in the tests shall have one access class out of the classes 0-9 defined. No
other access class (e.g. 10 or 11-15) shall be defined.
It is recommended that on any new SIM the Location Update Status field is set to "Status not updated" before the tests start (bit b2 set to "0" and bit b1 set to "1", of byte 11 of
Data-field 7E).
(a) The availability of a CCITT # 7 tester able to decode SCCP, TCAP and MAP is highly advisable, but not strictly necessary for these tests. However it is essential for any analysis
of test case failures.
(b) Clock capable of being used to allow testing personnel to record call start and chargeable start ( i.e. answer) time of calls to an accuracy of better than five seconds. If possible,
the clock shall be adjusted to be in alignment with the internal MSC clock which is used for the Toll Ticketing function.
(c) Stopwatch capable of measuring perceived chargeable duration of calls to an accuracy of one second.
The test configuration is shown in Figure 1 below. The test configuration for CS Fallback and CS Fallback for 1xRTT are shown in Figure 2 and Figure 3, respectively. It is
anticipated that it may be necessary to monitor both signaling messages and voice calls on any of the Network Entity interfaces shown in the diagram. However this is not a firm
requirement for this test specification.
1. regular scenario is PSTN (b2) > MS1 (a) w. Call Forw. to > PSTN (b1)
2. regular scenario PSTN (b2) > MS1(a)
3. regular scenario MS1(a) > MS2(a)
4. Regular scenario MS1(a) > PSTN (c1)
5. Regular scenario MS1(a) > PSTN (a)
To provide valid toll ticketing recording, then both the clock used to note call start and finish times for the test result sheets, and the internal VMSC clock must be checked against each other
and set to an accuracy of better than five seconds. Note the VMSC clock must only be altered in conjunction with local operating rules and procedures because all Toll Tickets will be affected
by any alteration.
Figure 3: CS Fallback and SMS over S102 for CDMA2000 1xRTT based systems
2.1 Basic Service Test Cases
It should be noted that no supplementary services are active during the Test cases which are described in Section 2.1.
Expected Reult: Successful result if VLR record is identical to the pre-testing information supplied by PLMN(a).
Unsuccessful result if any of the basic and supplementary services tested by this document or all of the information is missing.
Comments: This test case confirms operation of Update Location and Insert Subscriber Data procedures. It checks the support of the relevant MAP operations, TCAP processes and SCCP
addressing for both E214 and E164 Global Titles, between the HLR(a) and VMSC(b).
Expected Result: Successful result if VLR record for MS (a) has been erased and
when the established MOC is cut.
Comments: This test case confirms that the "cancel location" procedure
operates correctly and cuts the established call.
B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)
Action: HPLMN(a) personnel activates ODB for All Outgoing Calls and
All Incoming Calls when on Roaming for MS(a) from HLR either
using HLRs Man-Machine Interface or via Administrative Data
Centre (ADC) input to HLR.
Comments: This test case confirms that ODB procedures operate correctly.
Expected Result: Successful result if call is established in 30 seconds, and call is stable in unanswered and answered phases, and there is no perceptible echo to either user, and call remains in
intelligible/high quality conversation phase for one minute. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of
CLI information (or lack thereof) in a roaming scenario.
Comments: This test case confirms Mobile Originated and Mobile Terminated call sequences for roamers. It checks the support of the Provide Roaming Number MAP operation between
PLMN(a) and PLMN(b). It checks the ability to establish international call between the two PLMNs using roaming numbers. It implies the ability of the PLMNs to disable
excessive instances of echo control devices.
2.1.4 PSTN Telephone In Country Containing PLMN(b) Calls MS1(a), Which Has Roamed To VPLMN(b), But The VLR Has Lost The
Record For MS1(a).
PSTN Telephone(b2) Calls MS1(a) (VLR has lost the record for MS1(a) )
Preconditions: MS1(a) does not have a record in VMSC(b) but HLR(a) indicates that MS1 (a) is roamed to VMSC(b).
MS1(a) is active, but has not location updated in (periodic, normal or IMSI attach) since VLR record was removed.
Expected Result: Successful result if either first call-attempt is established or "System Failure" message is returned within 30 seconds. In addition the answered call, whether establish on the first
attempt or after the location update, has no perceptible echo to either user, and that an acceptable quality connection can be maintained. See CCITT Rec P.84 Annex D for
instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.
Comment: This test case confirms the VLR recovery mechanism, which may use the Send Parameters MAP operation. It also checks that the Gateway MSC (in PLMN(a)) correctly inserts
an echo cancellation device, and implies that other instances of echo control devices have been correctly configured.
2.1.5 PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Has Performed IMSI Detach.
PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - IMSI Detached (Power off)
Precondition: MS(a) is detached or deregistered in the VLR in VPLMN(b) but VLR(b) contains a record for MS(a)
Expected Result: Successful result if PSTN telephone(b2) receives an announcement that MS1(a) cannot be reached or is unavailable.
Comments: This test case confirms that the "absent subscriber" reason is given as the result of a roaming number enquiry to the VLR(b) where the MS(a) has performed an IMSI detach.
The detach status of the subscriber should be checked in the VLR, because the switching-off procedure of a Mobile does not guarantee that the subscriber will be detached,
because no acknowledgement message is sent from the VLR to the MS. The announcement may be in the language of PLMN(a), as it can be raised at the GMSC(a), but can
also be in the language of the PSTN in the country containing PLMN(b).
PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - No Response to Paging or Pre-Paging (Battery off)
Pre-Check: Check if the HPLMN(a) and PLMN(b) support Pre-paging, and HPLMN(a) sets a Pre-paging supported parameter in MAP_SEND_ROUTING_INFORMATION and
MAP_PROVIDE_ROAMING_NUMBER. (YES/NO)
Action: Disable MS(a) so that it is unable to respond to paging [Note MS(a) must not send IMSI Detach message, while being disabled].
Check that the subscriber is attached in the VLR, if possible.
Immediately attempt a call from PSTN telephone(b2) to MS1(a)
Expected Result: Successful result if PSTN telephone(b2) receives an announcement in the language of PLMN(b) that MS1(a) cannot be reached.
Comments: This test case confirms that the correct response is given when a call is made to a roamed mobile that does not respond to paging. Note that there will be some delay before the
failure announcement is given while the paging is performed. The announcement will be in the language of PLMN(b).
B) Pre-Paging
Precondition: MS1(a) is attached.
HPLMN(a) and PLMN(b) support Pre-paging, and HPLMN(a) sets a Pre-paging supported parameter in MAP_SEND_ROUTING_INFORMATION and
MAP_PROVIDE_ROAMING_NUMBER.
Action: Disable MS(a) so that it is unable to respond to pre-paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the
VLR, if possible.
Immediately attempt a call from PSTN telephone(b1) to MS1(a)
Expected Result: Successful result if PSTN telephone(b1) receives an announcement in the language of HPLMN(a) that MS1(a) cannot be reached.
Comments: This test case confirms that the correct response is given when a call is made to a roamed mobile that does not respond to Pre-paging. Note that there will be some delay before
the failure announcement is given while the Pre-paging is performed. The announcement will be in the language of HPLMN(a).
Test cases 2.2.1 to 2.2.8 require that the MS(a) is able to manage its own Supplementary Service registration and activation status.
The Call Forwarding test cases should be performed by using the "+" key.
It should be noted that only those Supplementary services referenced in the "Preconditions" notes are to be active.
Expected Result: Successful result if call "i" succeeds and call "ii" fails.
(i) MS(a) attempts Emergency Call [112 keyed on MS]
(ii) MS(a) attempts call to PSTN.
Comment: This test case confirms the support of this Supplementary Service by the VPLMN (b). It also indicates that Emergency Services are available to visitors from HPLM(a).
Action: (i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity
of the Calling Party]
(ii) MS(a) attempts outgoing call to Home PLMN Country.
Expected Result: Successful result if call "i" succeeds and call "ii" fails.
(i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity
of the Calling Party]
(ii) MS(a) attempts outgoing call to Home PLMN Country.
Comment: This test case confirms the support of this Supplementary Service by the VPLMN(b).
It also indicates that General Operator Services are available to visitors from HPLMN(a), that any special routing operates successfully, and that any Calling Party information
displayed to the operator is appropriately presented.
(ii) MS(a) attempts a call to the country, where the MS is presently located by making use of the international number format.
(iii) MS(a) attempts an international call to any other country than mentioned in (i) or (ii). (International Format should be +CC ...)
Expected Result: Successful result if calls of test cases "i" and "ii" succeeds, and the call of test case "iii" fails.
B 2.2.3.2 Activated Service is BOICexHC (VPLMN does not support SS: BOICexHC):
Preconditions: HLR entry contains "SS: BOICexHC: Active" [Set by MS]
Expected Result: Successful result, if the call (i) succeeds and call (ii) fails.
Comment: This test case confirm the support of this Supplementary Service by the VPLMN(b). In the case VPLMN(b) does not support the SS: BOICex HC then the switch makes a
Functional fallback because it supports BOIC.
Pre-Check: Check if the VPLMN does support the SS: BAICroaming. (YES / NO)
A) Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN.
Action: Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN.
MS(a) in VPLMN (b) activates the SS: BAICroaming PSTN (b) calls MS(a)
MS(a) in VPLMN (b) activates the SS: BAIC PSTN(b) calls MS(a)
Comment: This test case confirms the support of the activation of this Supplementary Service when roaming inside VPLMN.
2.2.5 Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON)
Preconditions: HLR entry for MS(a1) contains "SS : CFNRc: Active "Forwarded -to-address is PSTN telephone(b1). [Set by MS]
In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the
invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be
PSTN telephone(a).
Action: Disable MS(a1) so that it is unable to respond to paging [Note MS(a1) must not send IMSI Detach message, while being disabled. This can be achieved by removing the battery
while the phone is switched on].
Immediately attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN telephone(b1), MS(a2) or PSTN telephone(a).
Expected Result: Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality
Scales. Optionally, PSTN(b2) may receive an announcement that the call is being forwarded.
Comments: This test case confirms that CFNRc (before IMSI detach) operates correctly and implies that echo cancellers are correctly configured.
Note the announcement could be in the language of PLMN(b), as the call was forwarded by the VMSC(b).
Preconditions: HLR entry for MS(a1) contains "SS CFNRc: Active: Forwarded-to-address is PSTN telephone(b1)". [Set by MS]
In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the
invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be
PSTN telephone(a).
MS (a1) is detached or deregistered in the VLR, but the VLR contains a record for MS(a1).
If used, MS(a2) is attached.
Action: Check that the subscriber MS(a1) is detached in the VLR, if possible.
Expected Result: Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality
Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
Comments: This test case confirms that CFNRc (after IMSI detach) operates correctly and implies that echo cancellers are correctly configured.
The detached status of the subscriber should be checked in the VLR, because the switching-off procedure of a Mobile does not guarantee that the subscriber will be detached,
because no acknowledgement message is sent from the VLR to the MS.
Note the announcement will be in the language of PLMN (a) as the call was forwarded by GMSC(a).
Preconditions: HLR entry for MS (a1) contains SS: CFB: Active: Forwarded-to-address is PSTN telephone (b1). [Set by MS]
In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the
invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be
PSTN telephone(a).
Attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN(b1), MS(a2) or PSTN(a).
Expected Result: Successful result if indicate the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of
Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
Preconditions: HLR entry for MS (a1) contains "SS: CFNRy: Active: Forwarded-to-address is PSTN telephone (b1). [Set by MS]
Action: MS(a) initiates an Interrogate Call Forward Information. MS(a) displays information. Attempt a call from PSTN telephone(b2) to MS(a1). After a period of time during which
MS(a1) "rings", call is diverted to PSTN(b1), MS(a2) or PSTN(a) where it is answered.
Expected Result: Successful result if MS(a) displays equivalent information to that stored in HLR and if MS(a1) "rings" for length of time equal to "No Reply Timeout" value stored in HLR, and call
is completed to PSTN(b1), MS(a2) or PSTN(a), and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN
telephone(b2) may receive an announcement that the call is being forwarded.
Comments: This test case confirms that CFNRy operates correctly. It also confirms that the procedure Interrogate Call Forward Information operates correctly.
Preconditions: SMS-MO/MT is provisioned in HLR subscription. MS1(a) and MS2(a) are registered in VPLMN(b).
Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS - Service Centre with Message Waiting priority selected.
Switch on MS2(a)
Expected Result: Successful result if Short Message is correctly delivered within [2] minutes of switching MS2(a) on.
Comments: This test case confirms correct operation of SMS - Mobile Originated / Terminated Services including "Message Waiting" and "Note MS Present" procedures.
Preconditions: Please find below some information about how to perform it.
1. For the whole SMS IW test you will have to switch the MS2 off and wait for at least 2 minutes after you sent the SMS before you switch the phone on again,
2. The several times you will have to report consist on the time you have
a - sent the SMS
b - switched the MS2 on (and not when UL is done)
c - received the SMS on the MS2
3. Please do not forget to fill, sign and fax us the Appendix with all our required and selected test cases.
(see 2nd sheet "IR24 Setup Info & COMPL. CERT.")
2.4.2.1 Details of the tests
In order to be able to proceed the test independently from the roaming partner, SMS IW test can be performed with one SIM cards of the PLMN (a) and one SIM card of the
PLMN (b) both located on the PLMN (b).
Therefore, SIM (a) of PLMN (a) has to be able to roam on PLMN (b), so PLMN (a) and (b) must have a roaming agreement.
In the case of a roaming agreement as described above, the tests to be performed are the C.2.4.2.1 and C.2.4.2.2
2.4.2.1 SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1
If PLMN (a) and (b) do not have roaming agreements, the tests described above can not be performed, therefore, tests for SMS IW has to be performed in coordination with the SMS IW partner.
In the case of non roaming agreement, the tests to be performed are the C.2.4.3.1 and C.2.4.3.2.
In the following table the HPLMN should indicate the test cases that are
requested to be performed by the roaming partner (VPLMN).
Test Case Requested Test-cases & Description Results IREG-comments from "IR24 TEST CASES", if any
Selection
n/a
(see original entries in IR24 TEST CASES)
1 YES 2.1.1 Location Update by MS(a) in VPLMN(b)
B) Operator Determined Barring (ODB) for All Outgoing Calls and All
1 YES 2.1.2 Incoming Calls when on Roaming of MS(a)
Call Forwarding on Not Reachable (CFNRC -After IMSI Detach SWITCH THE
1 YES 2.2.6 PHONE OFF)
1 YES 2.3.1 Mobile ORIGINATED and Terminated Short Message Service (SMS-MO)
n/a
1 YES 2.4.1 Information on the testing (SMS-IW) n/a (see original entries in IR24 TEST CASES)
SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test
1 YES 2.4.2.1 C.2.4.2.1
6.2 COMPLETION CERTIFICATE related to the in 6.1 required and selected test cases
This certificate confirms the successful completion of selected Tests in 6.1 for Mobile
Subscribers of. HPLM HPLMN > field in TEST CASE PAGE entry H25
PLMN Network visited VPLMN > field in TEST CASE PAGE entry H26
Other comments
Date:
Date:
(H)PLMN (a) HPLMN > field in TEST CASE PAGE entry H25
(V)PLMN (b) VPLMN > field in TEST CASE PAGE entry H26
Date of Tests
Testing personnel PLMN(a) HPLMN TESTER NAME (a) > field in TEST CASE PAGE H28
Tel/Fax:
email PLMN (a): Tester@ HPLMN > field in TEST CASE PAGE H30
Testing personnel PLMN(b) TESTER NAME (b) > field in TEST CASE PAGE H31
Tel/Fax:
email PLMN (b): Tester@ VPLMN > field in TEST CASE PAGE H33
HLR Identity/Identities
HLR Manufacturer(s)
HLR Software Build Level(s)
GMSC Identity/Identities
GMSC Manufacturer(s)
GMSC Software Build Level(s)
VMSC Identity/Identities
VMSC Manufacturer(s)
VMSC Software Build Level(s)
SMS-SC Identity / Identities
SMS-SC Manufacturer(s)
SMS-SC Software Build Level(s)
Comments
Notes:
1. If Toll Ticketing is not in use then the line items marked with an asterisk (*) may be omitted from these Test Result Sheets.
2. If Supplementary Service activity Toll Ticketing is not in use there is no need to write the time at the lines marked with a plus (+).
expected result: Successful result if VLR record is identical to the pre-testing information supplied by PLMN(a).
Unsuccessful result if any of the basic and supplementary services tested by this document or all of the information is missing.
.
.
.
.
.
.
forTime
.
.
.
using HLRs Man-Machine Interface or via Administrative Data Centre (ADC) input to HLR.
.
Macro
Check VLR for record of MS(a).
expected result:
.
Successful result if VLR record for MS (a) has been erased and
when the established MOC is cut.
.
.
.
.
.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)
action: HPLMN(a) personnel activates ODB for All Outgoing Calls and
All Incoming Calls when on Roaming for MS(a) from HLR either
.
.
.
.
.
.
.
.
.
.
MSISDN of MS1 (a) Check VLR for record of MS(a). MSISDN MS1 (a) f.A1.2 I16
Try to call MS(a) and try to make a call from MS(a).
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
Operator performed barring from HLR [Yes/No]
VLR record contains barring tags [Yes/No]
Perform a call from MS(a). Is it successful? [Yes/No]
Call MS(a). Is it successful? [Yes/No]
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
.
Quality assessed.
.
forTime
Macro expected result: Successful result if call is established in 30 seconds, and call is stable in unanswered and answered phases, and there is no
perceptible echo to either user, and call remains in intelligible/high quality conversation phase for one minute. See CCITT Rec P.84
.
.
.
.
.
.
Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof)
in a roaming scenario.
MSISDN of originating MS (i.e. MS1(a)) MSISDN MS1 (a) f.A1.2 I16
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
Number keyed into MS1 (a) MSISDN MS2 (a) f.A1.2 I18 Info Info Info Info
IMSI MS2(a) IMSI MS2 (a) f.A1.2 I19 Alert Time
Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 0 3 2 -3
Delay between SEND key operation at MS1(a) and MS2(a) alerting secs 0:00:00 1 0
Time of perceived answer of call (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call. Duration must be 60sec or more.) secs 0:00:00
Quality of call [Excellent, Good, Fair, Poor, Bad]
Echo present? [Yes/No]
If Yes, to which MS? [MS1(a) / MS2(a)]
(i) Is the MSISDN of MS1(a) displayed at MS2(a) in proper format? [Yes/No]
IF NO, what does MS2(a) display?
(j) Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.1.4 PSTN Telephone(b2) Calls MS1(a) (VLR has lost the record for MS1(a) )
action:
.
PSTN telephone(b2) calls MS1(a).
If call is successfully established, then maintain answered call for one minute. Assess quality.
.
.
.
.
.
.
.
.
click Help
.
If call attempt returns "System Failure" message, then make MS1(a) perform a location update, and repeat this test case.
.
forTime
Macro
expected result:
.
Successful result if either first call-attempt is established or "System Failure" message is returned within 30 seconds. In addition
the answered call, whether establish on the first attempt or after the location update, has no perceptible echo to either user, and
.
.
.
.
.
that an acceptable quality connection can be maintained. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales.
This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.
Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)
Number of MS1(a) dialled by PSTN telephone (b2) MSISDN MS1 (a) f.A1.2 I16 Info Info Info Info
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17 Alert Time
Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 0 3 2 -3
Delay between dialing last digit of MSISDN of MS1(a) at PSTN telephone(b2)
and MS1(a) alerting secs 0:00:00 1 0
Time of perceived answer of call (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call. Duration must be 60sec or more.) secs 0:00:00
Was first call successful? [Yes/No]
Was location update sequence originated from the Mobile Station necessary ? [Yes/No]
Quality of successful call [Excellent, Good, Fair, Poor, Bad]
Echo present? [Yes/No]
If Yes, to which party? [PSTN/MS1(a)]
Is the Directory Number (DN) of Telephone(b) displayed at MS1(a) in proper format? [Yes/No]
IF NO, what does MS1(a) display?
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.1.5 PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - IMSI Detached (Power off)
action: Check that the subscriber is detached in the VLR, if possible.
Attempt a call from PSTN telephone(b2) to MS1(a)
.
.
.
.
.
.
.
.
.
.
click Help
.
forTime
Macro
expected result:
.
.
Successful result if PSTN telephone(b2) receives an announcement that MS1(a) cannot be reached or is unavailable.
.
.
.
.
Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)
Number of MS1(a) dialled by PSTN telephone (b2) MSISDN MS1 (a) f.A1.2 I16 Info Info
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
(hrs:mins:secs) (hrs:mins:secs) 1 0
Time of start of "not reachable" announcement (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
Language of announcement
Text of announcement
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
forTime Check that the subscriber is attached in the VLR, if possible. possible.
Macro Immediately attempt a call from PSTN telephone(b2) to MS1(a) Immediately attempt a call from PSTN telephone(b1) to MS1(a)
expected result: Successful result if PSTN telephone(b2) receives an Successful result if PSTN telephone(b1) receives an
announcement in the language of PLMN(b) that MS1(a) cannot announcement in the language of HPLMN(a) that MS1(a) cannot
.
.
.
.
.
.
be reached. be reached.
Does HPLMN(a) and PLMN(b) support Pre-Paging? [Yes/No]
Does HPLMN(a) sets a Pre-paging supported parameter in MAP_SEND_ROUTING_INFORMATION and
MAP_PROVIDE_ROAMING_NUMBER? [Yes/No]
Which test case was executed? [A (Paging) / B (Pre-paging)]
Directory Number of calling PSTN telephone(b2) PSTN (b2) from no. I23 (regular A-Pty)
Number dialled by PSTN telephone(b2) e.g. MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
Time of start of call (i.e. last digit dialled) (hrs:mins:secs) 1 0
Time of start of "not reachable" announcement (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
Language of announcement
Text of announcement
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
forTime
Macro
expected result: Successful result if call "i" succeeds and call "ii" fails.
(i) MS(a) attempts Emergency Call [112 keyed on MS]
.
.
.
.
.
.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help (ii) MS(a) attempts outgoing call to Home PLMN Country.
.
.
.
forTime
Macro
expected result: Successful result if call "i" succeeds and call "ii" fails.
(i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which
.
.
.
.
.
.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2.3 Barring Of Outgoing International Calls except To Home PLMN Country [BOICexHC]
action:
.
.
Check if the VPLMN does support the SS:BOICexHC. (YES/NO)
.
.
.
.
.
.
.
.
click Help
.
forTime
Macro
expected result:
.
.
see below
.
.
.
.
General
Method of Supplementary Service Configuration [MS User/HLR operator]
Does the switch support the SS: BOICexHC? [Yes/No]
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
click Help
.
.
(ii) MS(a) attempts a call to the country, where the MS is presently located by making use of the international number format.
.
forTime
Macro
(iii) MS(a) attempts an international call to any other country than mentioned in (i) or (ii). (International Format should be +CC ...)
expected result:
.
.
Successful result if calls of test cases "i" and "ii" succeeds, and the call of test case "iii" fails.
.
.
.
.
Info Info
Time of activation of BOICexHC 3
A.1) (i) Call to Home-PSTN-telephone(a):
Home PSTN (a) Country number keyed HPLMN PSTN (a) from field I24
Time of start of Home PSTN Country call (i.e. SEND key operation) (hrs:mins:secs) 1 0
Time of perceived answer of call (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 5 0
Home PSTN Country call Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
A.3) (iii) International Call, not to Home PLMN country and not to country where the MS is presently located:
International (Non Home PLMN Country and non country where MS(a) is presently located) call successful? [Yes/No]
Time of deactivation of BOICexHC 8 0
A.2.2.3.2 Activated Service is BOICexHC (VPLMN does not support SS: BOICexHC):
action:
.
.
(i) MS(a) attempts a call to local PSTN.
.
.
.
.
.
.
.
.
click Help (ii) MS(a) attempts outgoing call to Home PLMN country.
.
forTime
Macro
expected result:
.
.
Successful result, if the call (i) succeeds and call (ii) fails.
.
.
.
.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
MS(a) in VPLMN (b) activates the SS: BAICroaming PSTN (b) MS(a) in VPLMN (b) activates the SS: BAIC PSTN(b) calls
.
expected result:
.
.
Successful result, if calls fail Successful result, if calls fail
.
.
.
.
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info Info
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
Time of activation of [BAIC / BAICroaming] (hrs:mins:secs) 3 0
PSTN (b) number to call PSTN (b2) from no. I23 (regular A-Pty)
Number keyed by PSTN MSISDN MS1 (a) f.A1.2 I16
Call successful? [Yes/No]
Time of deactivation of [BAIC/BAICroaming] (hrs:mins:secs) 2 0
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON)
A 2.2.5
action: Disable MS(a1) so that it is unable to respond to paging [Note MS(a1) must not send IMSI Detach message, while being disabled.
This can be achieved by removing the battery while the phone is switched on].
.
.
.
.
.
.
.
.
.
click Help
.
Immediately attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN telephone(b1), MS(a2) or PSTN
.
forTime telephone(a).
Macro
expected result: Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84
Annex D for instructions on use of Quality Scales. Optionally, PSTN(b2) may receive an announcement that the call is being
.
.
.
.
.
.
forwarded.
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info Info
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
Time of activation of CFNRc (hrs:mins:secs) 3 0
Directory Number (i.e. DN) of calling PSTN telephone(b2) PSTN (b2) from no. I23 (regular A-Pty)
DN of forwarded - to - PSTN telephone(b1). Note 1 PSTN (b1) from no. I22 used for CFx Alert Time
Time of start of call (hrs:mins:secs) 0 3 2 -3
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1)
ringing Note 1 sec 0:00:00 1 0
Time of perceived answer of call (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration
Was an announcement (i.e.
that perceived
call answer
was - being until endreceived
- forwarded of call) by PSTN sec 0:00:00
telephone(b2)? [Yes/No]
Language of announcement [If applicable]
Text of announcement [If applicable]
Quality of successful call [Excellent, Good, Fair, Poor, Bad]
Echo present? [Yes/No]
If Yes, to which party? [caller/called]
Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used
then choose PSTN telephone(a).
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
.
forTime
Macro
expected result: Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84
Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is
.
.
.
.
.
.
being forwarded.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
.
.
forTime Attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN(b1), MS(a2) or PSTN(a).
Macro
expected result: Successful result if indicate the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT
Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that
.
.
.
.
.
.
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info Info
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
Time of activation of CFB (hrs:mins:secs) 3 0
Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)
Directory Number (DN) of PSTN telephone (b1) Note 1 PSTN (b1) from no. I22 used for CFx
Party with which MS(a1) is in conversation [DN] to be filled by VPLMN
IMSI MS2(a) IMSI MS2 (a) f.A1.2 I19 Alert Time
Time of start of call (hrs:mins:secs) 0 3 2 -3
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1)
ringing. Note 1 Sec 0:00:00 1 0
Time of perceived answer of call (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 2 0
Chargeable
Was Call Duration
an announcement (i.e.
that perceived
call answer
was - being until endreceived
- forwarded of call) by PSTN sec 0:00:00
telephone(b2)? [Yes/No]
Language of announcement [If applicable]
Text of announcement [If applicable]
Quality of successful call [Excellent, Good, Fair, Poor, Bad]
Echo present? [Yes/No]
If Yes, to which party? [caller/called]
Time of deactivation of CFB (hrs:mins:secs) 4 0
Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used
then choose PSTN telephone(a).
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
.
forTime
Macro
expected result: Successful result if MS(a) displays equivalent information to that stored in HLR and if MS(a1) "rings" for length of time equal to "No
Reply Timeout" value stored in HLR, and call is completed to PSTN(b1), MS(a2) or PSTN(a), and the call quality is acceptable.
.
.
.
.
.
.
See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an
announcement that the call is being forwarded.
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info Info
IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17
Time of activation of CFNRY (hrs:mins:secs) 2
Interrogate Supplementary Service at MS(a) by pressing *#61# Display Receipt Time
Start Time of SS activity (i.e. SEND key operation) (hrs:mins:secs) 0 3 2 -3
Delay between SEND key operation and receipt of Display information sec 0:00:00 1 0
Information displayed on MS(a)?
Does MS(a) displays correct status of the call forwarding service? [Yes/No]
Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)
Directory Number (DN) of PSTN telephone (b1) Note 1 PSTN (b1) from no. I22 used for CFx Alert Time
Time of start of call (hrs:mins:secs) 0 3 2 -3
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing. Note 1 sec 0:00:00 1 0
Time of perceived answer of call (hrs:mins:secs) 1 0
Time of end of call (hrs:mins:secs) 2 0
Chargeable
Was Call Duration
an announcement (i.e.
that perceived
call answer
was - being until endreceived
- forwarded of call) by PSTN sec 0:00:00
telephone(b2)? [Yes/No]
Language of announcement [If applicable]
Text of announcement [If applicable]
Quality of successful call [Excellent, Good, Fair, Poor, Bad]
Echo present? [Yes/No]
If Yes, to which party? [caller/called]
Time of deactivation of CFNRY (hrs:mins:secs) 4 0
Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used
then choose PSTN telephone(a).
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS - Service Centre with Message Waiting priority
.
.
.
forTime selected.
Macro
Switch on MS2(a)
expected result:
.
Successful result
Await delivery if Short
of Short Message
Message is correctly delivered within [2] minutes of switching MS2(a) on.
to MS2(a)
Check contents of Short Message with those transmitted.
.
.
.
.
.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
The numbering of the test result sections within this appendix is identical to the associated Test case from section 2 of the main document.
2.4.1 Location Update by MS(a) in PLMN(b)
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
2.4.2 SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1
click Help
forTime
Macro
expected result:
.
.
no result, no link
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
forTime
Macro
expected result:
.
.
no result, no link
.
.
.
.
MSISDN -MS2 (b) MSISDN MS2 (b) f.A1.2 I20 used for SMS-IW
IMSI - MS2 (b) IMSI MS2 (b) f.A1.2 I21 used for SMS-IW Info Info
E164 address of VPLMN SMS Service Centre
Time of initial transmitting by Service Centre (hrs:mins:secs) 3 0
MSISDN -MS1 (a) MSISDN MS1 (a) f.A1.2 I16
IMSI - MS1 (a) IMSI MS1 (a) f.A1.2 I17
Time of switching on MS1 (a) (hrs:mins:secs) 1 0
Time of receipt of SMS at MS1 (a) (hrs:mins:secs) 1 0
Was message correctly received? [Yes/No]
If the message was not received, repeat test with MS2(b) switched on. Was message
correctly received this time? [Yes/No]
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
.
forTime
Macro
expected result:
.
.
.
.
.
.
MSISDN -MS2 (b) MSISDN MS2 (b) f.A1.2 I20 used for SMS-IW
IMSI - MS2 (b) IMSI MS2 (b) f.A1.2 I21 used for SMS-IW Info Info
E164 address of VPLMN SMS Service Centre
Time of initial transmitting by Service Centre (hrs:mins:secs) 3 0
MSISDN -MS1 (a) MSISDN MS1 (a) f.A1.2 I16
IMSI - MS1 (a) IMSI MS1 (a) f.A1.2 I17
Time of switching on MS1 (a) (hrs:mins:secs) 1 0
Time of receipt of SMS at MS1 (a) (hrs:mins:secs) 1 0
Was message correctly received? [Yes/No]
If the message was not received, repeat test with MS2(b) switched on. Was message
correctly received this time? [Yes/No]
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
.
forTime
Macro
expected result:
.
.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
forTime
Macro
expected result:
.
Successful result if VLR/MME record is identical to the pre-testing information supplied by PLMN(a).
Unsuccessful result if any of the CS Fallback / SMS over SGs services tested by this document or all of the information is missing.
.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.2.1 CS Fallback Mobile Originated Voice Call - MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)
action:
.
MS1(a) establishes call to MS2(a).
Call answered.
.
.
.
.
.
.
.
.
.
.
click Help
forTime
Macro
expected result:
.
.
Successful result if call is established.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
forTime
Macro
expected result:
.
.
Successful result if call is established.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
expected result:
.
.
Successful result if Short Message is correctly delivered within two (2) minutes of switching MS2(a) on.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help Check MME/1xRTT MSC record for the IMSI/MSISDN of MS1.
forTime
Macro
expected result:
.
Successful result if 1xRTT MSC record is identical to the pre-testing information supplied by PLMN(a).
Unsuccessful result if any of the CS Fallback / SMS over S102 services tested by this document or all of the information is missing.
.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
forTime
Macro
expected result:
.
.
Successful result if call is established.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.7.1 1xRTT CS Fallback Mobile Terminated Voice Call - MS2(a) Calls MS1(a), Both Roamed In VPLMN(b)
action: MS2(a) establishes call to MS1(a).
click Help
.
Call answered.
.
.
.
.
.
.
.
forTime
.
.
.
Macro
expected result:
.
.
Successful result if call is established.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
expected result:
.
.
Successful result if Short Message is correctly delivered within two (2) minutes of switching MS2(a) on.
.
.
.
.
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 19.9.1
.
.
.
.
MSISDN -MS1
IMSI - MS1
MSISDN -MS2
IMSI - MS2
MSISDN -MS3 Info Info
IMSI - MS3
MS1 (a/b) Status request for various issue / time SEND KEY (hrs:mins:secs) 1 0
MS2 (a/b) Status request for various issue / time SEND KEY (hrs:mins:secs) 1 0
MS3 (a/b) Status request for various issue / time SEND KEY (hrs:mins:secs) 1 0
MS1 (a/b) Status request for various issue / time START (hrs:mins:secs) 1 0
MS2 (a/b) Status request for various issue / time START (hrs:mins:secs) 1 0
MS3 (a/b) Status request for various issue / time START (hrs:mins:secs) 1 0
MS1 (a/b) Status request for various issue / time END (hrs:mins:secs) 1 0
MS2 (a/b) Status request for various issue / time END (hrs:mins:secs) 1 0
MS3 (a/b) Status request for various issue / time END (hrs:mins:secs) 6 0
MS1 (a/b) Duration sec 0:00:00
MS2 (a/b) Duration sec 0:00:00
MS3 (a/b) Duration sec 0:00:00
Free Space to define the test, the MSISDN /IMSI and TIME relevant fields must b econnected to TH TADIG sheet in advance
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 19.10.1
.
.
.
.
MSISDN -MS1
IMSI - MS1
MSISDN -MS2
IMSI - MS2
MSISDN -MS3 Info Info
IMSI - MS3
MS1 (a/b) Status request for various issue / time SEND KEY (hrs:mins:secs) 1 0
MS2 (a/b) Status request for various issue / time SEND KEY (hrs:mins:secs) 1 0
MS3 (a/b) Status request for various issue / time SEND KEY (hrs:mins:secs) 1 0
MS1 (a/b) Status request for various issue / time START (hrs:mins:secs) 1 0
MS2 (a/b) Status request for various issue / time START (hrs:mins:secs) 1 0
MS3 (a/b) Status request for various issue / time START (hrs:mins:secs) 1 0
MS1 (a/b) Status request for various issue / time END (hrs:mins:secs) 1 0
MS2 (a/b) Status request for various issue / time END (hrs:mins:secs) 1 0
MS3 (a/b) Status request for various issue / time END (hrs:mins:secs) 6 0
MS1 (a/b) Duration sec 0:00:00
MS2 (a/b) Duration sec 0:00:00
MS3 (a/b) Duration sec 0:00:00
Free Space to define the test, the MSISDN /IMSI and TIME relevant fields must b econnected to TH TADIG sheet in advance
Comments
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.1.1
.
.
.
.
Test Case
Click here Comments
to paste a
Template
page into
this Test Testcase Result [PASS / FAIL / NOT PERFORMED]
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.2.1
.
.
.
.
Test Case
Click here Comments
to paste a
Template
page into
Testcase Result [PASS / FAIL / NOT PERFORMED]
this Test
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.3.1
.
.
.
.
Test Case
Click here Comments
to paste a
Template
page into
this Test Testcase Result [PASS / FAIL / NOT PERFORMED]
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.4.1
.
.
.
.
Test Case
Click here Comments
to paste a
Template
page into
Testcase Result [PASS / FAIL / NOT PERFORMED]
this Test
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.5.1
.
.
.
.
Test Case
Click here Comments
to paste a
Template
page into
Testcase Result [PASS / FAIL / NOT PERFORMED]
this Test
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.6.1
.
.
.
.
Test Case
Click here Comments
to paste a
Template
page into
Testcase Result [PASS / FAIL / NOT PERFORMED]
this Test
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.7.1
.
.
.
.
Test Case
Click here Comments
to paste a
Template
page into
Testcase Result [PASS / FAIL / NOT PERFORMED]
this Test
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.8.1
.
.
.
.
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.9.1
.
.
.
.
Click here
to Clear
Paste-
contents.
click Help
forTime
Macro
expected result:
.
.
Detail Text 3 (Result) 20.10.1
.
.
.
.
Test Case
Click here
Comments
to paste a
Template
page into
this Test Testcase Result [PASS / FAIL / NOT PERFORMED]
Case.
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
Paste Test Case Below
Click here
to Clear
Paste-
contents.
End of Document
Return to IR24 Test Case Page Click to select this Operator Specific Test
Return to IR24 Test Case Page Click to select this Operator Specific Test
YES
The intention of this worksheet is to allow easy download of the IREG test results for TADIG testers. YES
To this extent this page only provides results for tests where a CDR can be created in TAP. Create YES
Whether or not that CDR is then created may also depend on the charging principles or network setup of the visited network. CSV file YES
For more information on the expected outcome on TAP please refer to GSM PRD TD.43 YES
YES
-- IR.24 - please refer to GSM PRD TD.43 YES
YES
Subscriber ID YES
IREG Test Event TAP CDR Service Type MSISDN Other Startime of CDR Chargeble Calling/Call APN Status
Ref Number Type (IMSI!) DURATION ed Party YES
2.1.1 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A YES
2.1.2A 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none N/A YES
2.1.2B 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A YES
MSISDN MS2
2.1.3 1 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 (a) f.A1.2 I18 none N/A YES
MSISDN MS1
2.1.3 2 MTC Voice MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 0:00:00 (a) f.A1.2 I16 none N/A YES
2.2.8 1 SS CFNRy MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
2.2.8 2 None Expected none none none none none none N/A YES
PSTN (b2) from
no. I23 (regular
2.2.8 3 MTC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 A-Pty) none N/A YES
PSTN (b1) from
no. I22 used for
2.2.8 4 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none CFx none N/A YES
2.2.8 5 SS CFNRy MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
2.3.1 1 MOC SMS-MO MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
2.3.1 2 MTC SMS-MT MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A YES
2.4.2.1 1 N/A SMS-MO MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
2.4.2.2 2 N/A SMS-MT MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
2.4.3.1 1 N/A SMS-MO MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
2.4.3.2 2 N/A SMS-MT MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A YES
GSMA SPECIFIC Test Cases YES
19.1.1 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A YES
MSISDN MS2
19.2.1 1 MOC Voice (CSFB) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 (a) f.A1.2 I18 none N/A YES
MSISDN MS1
19.3.1 1 MTC Voice (CSFB) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 0:00:00 (a) f.A1.2 I16 none N/A YES
19.4.1 1 N/A SMS-MO(SMSoSGs) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
19.4.1 2 N/A SMS-MT(SMSoSGs) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A YES
19.5.1 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A YES
MSISDN MS2
19.6.1 1 MOC Voice (1xRTT CSFB) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 (a) f.A1.2 I18 none N/A YES
MSISDN MS1
19.7.1 1 MTC Voice (1xRTT CSFB) MSISDN MS2 (a) f.A1.2 I18 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 (a) f.A1.2 I16 none N/A YES
19.8.1 1 N/A SMS-MO(SMSoS102) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A YES
19.8.1 2 N/A SMS-MO(SMSoS102) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A YES