Beruflich Dokumente
Kultur Dokumente
R FKynaston
DUSTRI
IN A
A
L
STRALI
1985
DE S I GN C
R F KYNASTON 1987
AU
The Australian Design Award is the buyers independent guarantee that the
W Latham and Co. Pty Ltd Index number
registered trade mark in all promotion associated with their Registered trade mark
Email: joints@latham-australia.com
John McKim Chairman
These products have been judged worthy of the Australian Design Awards in
Australian Design Council
Australian
www.latham-australia.com
Design Award respect to 43 separate visible and hidden properties.
1989 1586
W Latham and Co. Pty Ltd Index number
is licensed to use the ADC Australian Design Award 17th July, 1989
OUR HISTORY
Date
registered trade mark in all promotion associated with their Registered trade mark
Australian
Design Award
1990 1586
W Latham and Co. Pty Ltd Index number
is licensed to use the ADC Australian Design Award 24th July, 1990
Date
registered trade mark in all promotion associated with their Registered trade mark
Australian
Design Award
1992 1586
W Latham and Co. Pty Ltd Index number
is licensed to use the ADC Australian Design Award 14th July, 1992 Date
registered trade mark in all promotion associated with their Registered trade mark
Latham further expanded its product range to include dirt control entry mats, architectural
landscape grids and grates, loading dock bumpers, tactile indicator studs, wall protection
Latham systems, speciality terrazzo and stone cleaners/sealers, exporting to USA, Britain, Europe,
Neoprene-X-Pansion
Loc/ Tile Strips & Major South East Asia, Asia, The Middle East and the Pacific Region.
Movement Systems
The name Latham is synonymous with quality. Latham products can be found in many
prestigious buildings around the world. The products have won over 30 awards including
22 numerous Australian Design Awards and are recognised world wide.
Table of Contents
Latham Australia
and The Australian Design Award .......................................................................2
Introduction ..........................................................................................................5
Specifications ....................................................................................................68
Email: joints@latham-australia.com
www.latham-australia.com
33
Email: joints@latham-australia.com
www.latham-australia.com
The Petronas Twin Towers, Kuala
Lumpur City Centre, 451.9 metres
above street level, are two of
the worlds tallest buildings and
features Latham Expansion Joint
Covers in the sky bridge joining
the towers on level 68.
4
Latham Original Self Aligning
Flexible Expansion Joint Covers
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
Maintenance free The key to our system is a centering bar which consists
systems for floor, of two wear resistant spheres fastened at opposite ends of
a flat spring steel bar. These act as lubrication free bearings,
Latham Australia Pty Ltd
floor-to-wall, wall, minimising wear on the aluminium and brass tracks in which the
ceiling, roof, carparks mechanism constantly moves. The bars are positioned diagonally
across the joint opening. The spring steel centering bar holds the
& roadway applications cover plate central and the fixing screws tight. Illustrated: CA-25V
When you select Latham Flexible Mechanical Expansion Joint Covers, and have a special configuration fabricated, you are taking
advantage of a unique solution to the problem of keeping joint covers firmly anchored despite movement between sections of
concrete flooring. This ensures a long-lasting, trouble free and stable floor base.
The mechanical expansion joint covers are designed to permit multi-directional six-way movement. The cover unit is free to move
horizontally, vertically, and horizontally in shear without damaging the surrounding concrete and paving, deforming the cover plate
or shearing the screws holding the cover plate in place.
Whatever your project, Latham Flexible Mechanical Expansion Joint Covers are available and can be fabricated to almost any
width or required joint movement.
Optional water gutters or fire barriers are part of the totally trouble free full joint system.
All Latham Mechanical Expansion Joint Covers unless otherwise detailed are designed for normal pedestrian applications. If the
application is heavier e.g. high traffic areas like railway stations or airports or where heavier loads may transverse the joint cover,
see the heavy duty and vehicular ranges, consult Latham Australia to specify a suitable cover thickness.
All Latham Expansion Joint Covers offer various amounts of movement as indicated by the symbols associated with systems and
the related tables detailed below. All systems will accommodate general thermal expansion and contraction and shrinkage as
indicated. In some cases depending on the requirements of the structure, standard systems also will allow seismic movement,
although in applications where a structure has been designed to accommodate extreme seismic movement the Latham Seismic
Range of expansion joint covers should be considered. More information can be found on pages 60-64.
Email: joints@latham-australia.com
INDEX
www.latham-australia.com
These symbols appear throughout the catalogue and indicate which of these situations the relevant joint covers will accommodate.
multi directional multi directional multi directional multi directional indoor use outdoor use water gutter fire rated seismic vehicular
2-way movement 4-way movement 4-way movement 6-way movement
Note 1: Movement referred to in this publication should be viewed in the following way. The + (positive) factor refers to the effec-
tive amount the joint cover can extend (the joint in the slab increases in width), whilst the (minus) factor refers to the effective
amount the joint cover can contract (the joint in the slab decreases in width). These are effective movements, the systems may be
effected by load and traffic volume and other circumstances, which may require a larger or heavier system to be considered. All
movements shown in the tables refer to the expansion joint cover being in its standard installation configuration A (as detailed in
tables). Altering the installation position will alter the available movement, but will not alter the total available movement.
Systems also offer vertical movement and horizontal shear as indicated by the relevant symbol associated to the particular joint
cover. The amount of this is dependant on the system and the joint width. Consult Latham Australia for further information in rela-
tion to a specific joint cover.
Note 2 : All specifications, should be written in conjunction with Optional Extras and the Expansion Joint specifications on
pages 6-7 and 68-69 respectively of this publication.
Note 3: For confirmation of cover plate thickness for profiles in this publication that refer to more than 1 cover plate type, refer
to the actual technical drawing relating to the required expansion joint cover. Contact your Latham Australia Pty Ltd technical
representative for further details, or visit our website www.latham-australia.com.
5
Product Information
Materials
Metals
Extrusions used in Latham Expansion Joint Covers are aluminium 6063-T5 & T6 mill finish alloy, brass 380 mill finish alloy or stain-
less steel decks, Type 304 Grade, 2B finish to 3mm thick, thicker stainless steel decks are supplied in No.1 finish. On request other
stainless steel finishes are available if specified at time of order and subject to minimum order quantites.
When expansion joint covers are being installed in areas of high temperature change or in continuous runs, special consideration
should be given to thermal expansion of the metal components, which is approximately 0.025mm per metre, per degree Celsius of
temperature change. Allowances should be made accordingly for side members and particularly cover plates during installation.
Vinyl
All vinyl plastic extrusions used are polyvinyl chloride (thermoplastic). This material has extreme versatility; it is light weight,
strong, tough and inert to most chemicals. It is a metallic grey colour in most profiles, blending with our standard finishes. Other
colours may be available for large volume orders or as detailed on the specific product page in this catalogue. Some expansion
Email: joints@latham-australia.com
joint inserts are supplied with neoprene or santoprene inserts.
www.latham-australia.com
Finishes
Coatings
Titazel PE31, is a protective coating applied to all steel members to protect and control electrolytic action.
Clear Anodised
20 micron finish is standard for all wall and ceiling visually exposed cover units, with the exception of the M, ML, MSM and MLSM
Series which are supplied mill finish unless otherwise specified.
Protective Tape
All exposed anodised aluminium surfaces will be supplied covered with protective film/tape to be removed on application.
Materials covered with protective tape should not be subjected to prolonged sunlight or extreme temperatures and the tape should
be removed within 30 days of delivery.
Cover Plates
All aluminium, brass and stainless steel floor cover plates are discretely stamped on the surface close to one end as manufactured
by Latham Australia, which ensures installed material can be identified in the future and is the clients confirmation that the speci-
fied product has been installed. Cover plate thicknesses may vary for aluminium and stainless steel. Confirm cover plate thickness
with the technical sheet for the selected profile, available from Latham Australia. Thicker, wider cover plates may protrude slightly
above the side member, but are suppled with a half height bevel at 45 on most covers.
Anchors
CA-16 aluminium/BM-16 brass block-out or CA-6 aluminium/BS-6 brass cast-in type anchors in standard
applications are installed at 500mm centres on both sides of the embedded members. CA-16 aluminium/ CA-6
BM-16 brass block-out anchors will be supplied unless otherwise specified. To specify CA-6 aluminium/BS-6
CA-16
brass cast-in anchors for ranges suited to these angles specify Latham Mechanical Expansion
Joint Cover Type with CA-6/BS-6 cast-in anchors. Latham Australia recommend that all
embedded aluminium members be coated with Tnemec PZ9 protective coating (optional extra) CCA-16
- see page 7.
CCA-6
Fixing Holes and Locations
Most expansion joint covers are supplied with side members pre-drilled to suit fixing sizes as indicated on the
relevant joint series page in this publication.
Splices
Where applicable to the joint type specified, CA-16 block-out or CA-6 cast-in splices are supplied to assist with
positive alignment of aluminium embedded members. Latham Australia recommend that all embedded aluminium
members be coated with Tnemec PZ9 protective coating (optional extra) - see page 7.
steel and brass cover plates. Slip resistant coating when specified will be supplied in
black colour unless otherwise specified. Other coating colours available. Contact your
Latham Australia technical representative. Specify with re-surfacable slip resistant
Latham Australia Pty Ltd
coating.
Powder Coating/Anodising
Powder coating or anodising can be applied to all exposed aluminium surfaces. Latham
Australia does not recommend powder coating or anodising for floor or floor to wall
expansion joint covers, as the surfaces are often easily scratched by foot traffic. Specify
type of coating and colour required. Interior/exterior wall and exterior roof joint covers,
can be successfully powder coated or anodised to harmonize with the surrounding fin-
ishes. Contact your Latham Australia Pty Ltd technical representative for further details.
Water Gutter
Available for most Latham expansion joint covers (available with all ranges that carry
( ) symbol in the description), Latham expansion joint water barriers are made of high
quality flexible PVC for the VWS Series, and Neoprene for the BFG Series. Water barriers
are furnished in continuous lengths where possible to reduce field splicing.
While exterior wall covers effectively keep most water out of the joint, wind, blowing rain
and seepage require the use of water barrier at exterior joints. Water barriers are also
suggested for interior floors subject to mopping and washing. Specify V after the prod-
uct code for water barrier e.g. CA-25V.
At exterior walls, water should drain freely to the exterior at the base of the joint cover.
When difficult drain points occur in roof and floor joints, a flexible PVC drain tube may be
installed allowing drainage to building drain systems.
Latham Australia recommend that all corners, cross overs and tees, be factory fabricated
www.latham-australia.com
Mechanical Fixings
Fixings are not supplied by Latham Australia. Suitable fixings for your application should
be sourced, ensuring the expansion joint cover is securely fixed to the structural slab at
the indicated centres on the relevant page of this publication for the joint cover selected.
The Latham Ultimate Series offers a range of expansion joint covers suited to most floor and floor-to-wall applications.
The systems offer generous thermal and structural movement and shrinkage and will accommodate limited seismic
movement. Systems are available in stainless steel, aluminium and brass to complement most facets of architectural
design, whilst incorporating the required movement element. Ultimate Series floor and floor-to-wall expansion joint
covers should be considered with Wall-Line Series wall and ceiling expansion joint covers.
Email: joints@latham-australia.com
The Latham Ultimate Series CS Ultimate Series
www.latham-australia.com
Standard 33mm deep floor and
floor-to-wall expansion joint cov- CA-16 Block-Out Anchor
ers are available with aluminium factory drilled with 10mm
holes B
ratedfireat maximum
and stainless
2-way movement
steel
multi directional
2-way movement
cover
multi directional
multi directional
4-way movement
plates;
multi directional
4-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire rated
500mm centres
seismic seismicvehicularvehicular
D C E
this series can carry a VWS
water gutter ( ) if required. 33mm
with CA-6 Cast-In Anchors. CS-25 CA-25 25 86 50 18 12 82 +20/-15mm 35mm 33mm 3mm
CS-50 CA-50 50 111 75 18 12 82 +20/-25mm 45mm 33mm 3mm
The Latham Ultimate Series CS-35 CA-35 35 125 75 25 20 82 +35/-25mm 60mm 33mm 3mm
Standard floor and floor-to-wall CS-60 CA-60 60 150 100 25 20 82 +/-35mm 70mm 33mm 3mm
expansion joint covers are CS-75 CA-75 75 165 115 25 20 82 +/-35mm 70mm 33mm 3mm
designed for normal pedestri- CS-85 CA-85 85 175 125 25 20 82 +/-35mm 70mm 33mm 3mm
an applications such as office CS-100 CA-100 100 190 140 25 20 82 +/-35mm 70mm 33mm 3mm
CS-135 CA-135 135 225 175 25 20 82 +/-35mm 70mm 33mm 5mm
buildings, hotels, foyers, shop-
Wider joint widths available on request. All dimensions are in millimetres. All mechanical expansion joint fixings by others.
ping centres and airports etc.
These joint covers can be used
in conjunction with many floor
Illustrated DCSL-25.
Stainless Aluminium
Total Available Overall Cover Plate
Steel Code Code A B C D E F Movement
Movement Depth Thickness
smooth deck ribbed deck
DCSL-25 DCAL-25 25 56 37 18 12 68 +/-12mm 25mm 25mm 3mm
DCSL-50 DCAL-50 50 82 62 18 12 68 +/-12mm 25mm 25mm 3mm
DCSL-75 DCAL-75 75 106 87 18 12 68 +/-12mm 25mm 25mm 3mm
DCSL-60 DCAL-60 60 130 99 40 35 105 +/-32mm 65mm 25mm 3mm
DCSL-110 DCAL-110 110 180 145 40 35 105 +/-32mm 65mm 25mm 3mm
DCSL-150 DCAL-150 150 220 185 40 35 105 +/-32mm 65mm 25mm 5mm
Wider joint widths available on request. All dimensions are in millimetres. All mechanical expansion joint fixings by others.
Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing. 9
Surface Fixed Floor Expansion Joint Covers Stainless Steel, Aluminium
Email: joints@latham-australia.com
The Latham Ultimate Series NSS Ultimate Series
www.latham-australia.com
Surface Fixed 25mm deep floor
and floor-to-wall expansion
joint covers are available with
aluminium and
multi directional
2-way movement
stainless
multi directional
2-way movement
multi directional
4-way movement
4-way movement
steel
multi directional
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
10 Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing.
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
SLS (FASM 38) Ultimate Series etc. These joint covers can be
www.latham-australia.com
F A
Illustrated SLS-25 (FASM 38).
Latham
Neoprene-X-Pansion
Loc /Tile Strips & Major
Movement Systems
Locate a profile in our product index listing
Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing. 11
Deep Floor Expansion Joint Covers Stainless Steel, Aluminium
Email: joints@latham-australia.com
The Latham Ultimate Series SAS (FASM 50) Ultimate Series
www.latham-australia.com
Deep (FASM 50) 50mm deep
floor and floor-to-wall expansion
joint covers are available with
aluminium and
multi directional
2-way movement
stainless
multi directional
2-way movement
multi directional
4-way movement
4-way movement
steel
multi directional
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular B
cover plates. This series can D C E
Optional VWS
Water Gutter
F A
Illustrated SLS-50 (FASM 50).
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement floor and floor-to-wall expansion
B joint covers are available with
D C E aluminium and stainless steel
cover plates. This series can
Side members
64mm factory drilled carry a BFG water gutter ( ) if
with 10mm holes required.
at approximately
475mm centres The series has a depth below the
finished floor height of 64mm.
The series is designed to be
Optional BFG installed with terrazzo tiles with
Water Gutter an overall set down of approxi-
F A
Illustrated SAS-55 (FASM 64). mately 64mm, although it is suit-
Stainless Total Cover able for installations with other
Aluminium Code Overall
Steel Code A B C D E F Movement Available Plate floor finishes as well. When the
ribbed deck Depth
smooth deck Movement Thickness
installation structural joint width
SAS-30 (FASM 64) SAA-30 (FASM 64) 30 182 100 40 35 101 +65/-20mm 85mm 64mm 3mm
exceeds 50mm the Series can
SAS-55 (FASM 64) SAA-55 (FASM 64) 55 207 125 40 35 101 +65/-45mm 110mm 64mm 3mm
accommodate the Latham Fire
SAS-80 (FASM 64) SAA-80 (FASM 64) 80 232 150 40 35 101 +/-65mm 130mm 64mm 3mm
SAS-105 (FASM 64) SAA-105 (FASM 64) 105 257 175 40 35 101 +/-65mm 130mm 64mm 3mm Barrier system ( ).
SAS-130 (FASM 64) SAA-130 (FASM 64) 130 282 200 40 35 101 +/-65mm 130mm 64mm 5mm The Latham Ultimate Series
SAS-155 (FASM 64) SAA-155 (FASM 64) 155 307 225 40 35 101 +/-65mm 130mm 64mm 5mm
Deep (FASM 64) floor and floor-
Wider joint widths available on request. All dimensions are in millimetres. All mechanical expansion joint fixings by others.
to-wall expansion joint covers
are designed for normal pedes-
Floor-to-Wall Expansion Joint Covers Stainless Steel, Aluminium trian applications such as office
buildings, hotels, foyers, shop-
SLS (FASM 64) Ultimate Series ping centres, airports etc. These
Email: joints@latham-australia.com
B
C
junction with many floor finishes
such as terrazzo tile, insitu ter-
nal
ulti directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular razzo, pavers, tile, timber, natu-
way
ent movement
4-way movement
6-way movement
6-way movement
D 42mm ral stone etc.
Stainless Steel
Aluminium Code
Total
Overall
Cover Locate a profile in our
Code A B C D E F Movement Available Plate
smooth deck
ribbed deck
Movement
Depth
Thickness product index listing
SLS-30 (FASM 64) SLA-30 (FASM 64) 30 105 65 40 35 101 +32/-25mm 57mm 64mm 3mm
SLS-55 (FASM 64) SLA-55 (FASM 64) 55 130 90 40 35 101 +/-32mm 65mm 64mm 3mm
SLS-80 (FASM 64) SLA-80 (FASM 64) 80 155 115 40 35 101 +/-32mm 65mm 64mm 3mm
SLS-105 (FASM 64) SLA-105 (FASM 64) 105 180 140 40 35 101 +/-32mm 65mm 64mm 3mm
SLS-130 (FASM 64) SLA-130 (FASM 64) 130 205 165 40 35 101 +/-32mm 65mm 64mm 5mm
SLS-155 (FASM 64) SLA-155 (FASM 64) 155 230 190 40 35 101 +/-32mm 65mm 64mm 5mm
Wider joint widths available on request. All dimensions are in millimetres. All mechanical expansion joint fixings by others.
Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing. 13
Variable Height Floor Expansion Joint Covers Stainless Steel, Aluminium
Email: joints@latham-australia.com
The Latham Ultimate Series SAS (SSSM ) Ultimate Series
www.latham-australia.com
( SSSM ) has the aluminium
B
side member installed on a con- D C E
tinuous treated steel support,
14mm
and as 2-way
such
multi
movement
we4-way
directional
2-way movement
multican
multi directional directional
movement
offer
multi directional
4-way movement
a directional
multi directional
multi
4-way movement
multi directional
4-way movement
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement floor and floor-to-wall expansion
B
BM-16 Anchor E joint covers are constructed of
D C
solid brass. The series has a
25mm depth below the finished floor
height of 25mm.
floors etc.
multi directional
multi directional multi directional
multi directional multi directional
multi directional multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter fire ratedfire ratedseismic seismicvehicularvehicular
water gutter
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement The systems offer various move-
All anchors are supplied
B
ments in 6 directions. The actual
welded to the side members
C movement available will depend
at approximately 475mm
centres. BM-16 anchors are D on the physical structural joint
supplied factory drilled with width and the installation width
35mm
10mm holes at approximately
475mm centres E for the expansion joint cover.
Wall member
25mm factory drilled
to accept
countersunk
head 6.5mm
A fixings
BS-6 Cast-In
Anchor (optional) F
Email: joints@latham-australia.com
The Latham Brass Ultimate SAB Brass Ultimate Series
www.latham-australia.com
Series (SSSM ) has the solid
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicveh
brass expansion joint cover 2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement
45mm (varies)
versatile SAB and SLB Series as drawn. angle supports factory
Available depths: 45mm, drilled with 10mm holes
in non standard depths for floor
55mm, 70mm, 80mm, at approximately
and floor-to-wall expansion 95mm, 105mm, 130mm 475mm centres
applications. & 155mm.
F distance subject to
This series can carry a BFG required depth. Optional BFG
water gutter ( ) if required. The Water Gutter
series has a variable depth F A
Illustrated SAB-25 (SSSM 45).
below the finished floor height of
45mm, 55mm, 70mm, 80mm, Solid Brass Code
A B C D E F Movement
Total Available Minimum Cover Plate
smooth deck Movement Overall Depth Thickness
95mm, 105mm, 130mm and
155mm. Unless otherwise speci- SAB-25 (SSSM ) 25 86 50 18 12 +/-15mm 30mm 45mm 3mm
fied the 25 and 50 Series will SAB-50 (SSSM ) 50 111 75 18 12 +15/-25mm 40mm 45mm 3mm
have a standard depth of 45mm, SAB-51 (SSSM ) 50 160 100 30 25 +/-40mm 80mm 55mm 3mm
SAB-75 (SSSM ) 75 185 125 30 25 +40/-50mm 90mm 55mm 3mm
whilst the 51 Series and above
SAB-100 (SSSM ) 100 210 150 30 25 +40/-50mm 90mm 55mm 5mm
with have a standard depth of
SAB-150 (SSSM ) 150 260 200 30 25 +40/-50mm 90mm 55mm 5mm
55mm. Alternatively () specify Wider joint widths available on request. All dimensions are in millimetres. All mechanical expansion joint fixings by others.
depth (custom heights available
on request).
17
Flat-Line Series MULTI-DIRECTIONAL | MAINTENANCE FREE | NO BUMP
The Latham Flat Lines Series NO BUMP expansion joint covers are specifically designed for applications where a bump in the floor can
not be tolerated. These systems offer limited movement but ensure that there is no bump for beds or trolleys that pass over the cover. The
systems offer thermal and structural movement and shrinkage and will accommodate limited seismic movement. Systems are available
in stainless steel, aluminium, brass and various shallow cover plate inserts, to complement most facets of architectural design, whilst
incorporating the required movement element. Flat-Line Series floor and floor-to-wall expansion joint covers should be considered with
Wall-Line Series wall and ceiling expansion joint covers.
Email: joints@latham-australia.com
The Latham Flat-Line Series NBDS Flat-Line Series
www.latham-australia.com
Standard 25mm deep floor and
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicveh
floor-to-wall expansion joint cov- 2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement floor-to-wall expansion joint cov-
B ers are available in solid brass.
C
D E The series has a depth below the
finished floor height of 25mm.
BM-16 Anchor
25mm
The series can be set into a
preformed recess with BM-16
BS-6 Cast-In Block-Out Anchors (supplied
Anchor (optional) A
unless otherwise noted), in con-
F
junction with mechanical fixings,
All anchors are supplied welded to the side members at approximately
475mm centres. BM-16 anchors are supplied factory drilled with 10mm
or cast-into the slab when it
holes at approximately 475mm centres is poured, with BS-6 Cast-In
Anchors.
Illustrated NBB-55. All mechanical expansion joint fixings by others.
The Latham Flat-Line Series
Solid Total Available Overall Cover Plate
A B C D E F Movement floor and floor-to-wall expansion
Brass Code Movement Depth Thickness
joint covers are designed for
NBB-55 55 118 100 9 3 66 +34/-6mm 40mm 25mm 3mm
normal pedestrian applications
NBB-80 80 143 125 9 3 66 +34/-6mm 40mm 25mm 3mm
where even the slightest bump
NBB-105 105 245 225 10 4 75 +82/-8mm 90mm 25mm 3mm
NBB-130 130 270 250 10 4 75 +82/-8mm 90mm 25mm 5mm in a floor can not be tolerated
Wider joint widths available on request. All dimensions are in millimetres. like in hospitals, nursing homes,
operating theatres and spe-
Locate a profile in our product index listing cialty manufacturing plants. The
Latham Flat-Line Series can be
used in conjunction with many
Floor-to-Wall Expansion Joint Covers Brass NO-BUMP floor finishes, such as terrazzo,
tile, concrete, vinyl, direct stick
Email: joints@latham-australia.com
Email: joints@latham-australia.com
The Latham Brass Visual Flat- AB Flat-Line Series
www.latham-australia.com
Line Series 36mm deep floor
CA-16 Block-Out
and floor-to-wall expansion joint Anchor factory B
covers have a aluminium base drilled with 10mm
holes at maximum C
with brass
multi directional multi
2-way movement2-way 4-way
visual
multi
directional
directional
multi
movement
movement
2-way
top
multi
4-way
movement
multi
directional
4-way
plates
directional
directional
multi
movement
movement
4-way
multi
4-way
movement
and
multi
directional directional
6-way
directional
multi
movement
movement
4-way
multi directional
directional multi
indoor
6-way movement
movement
directional
use
6-way movement
outdoor
indoor use
use
indoor use
water
outdoor
gutter
outdoor
use water
use
fire rated
gutter
water gutter
fire
seismic
ratedfire ratedvehicular
500mm centres
seismic seismicvehicularvehicular
D E
beige colour resilient inserts.
This series can carry a water 36mm
gutter ( ) if required.
Floor-to-Wall Expansion Joint Covers Stainless Steel, Aluminium The systems offer various move-
with Resilient Insert ments in 6 directions. The actual
B
movement available will depend
CL Flat-Line Series CA-16 Block-Out
C
on the physical structural joint
Anchor factory width and the installation width
drilled with 10mm D
42mm for the expansion joint cover.
holes at maximum E
500mm centres
ulti
almulti
directional
multi
directional
directional
multi directional
multi
indoor
directional
use outdoor
indoor use
use
indoor use
water
outdoor
gutter
outdoor
use water
use
fire rated
gutter
water gutter
fire
seismic
ratedfire ratedvehicular Vinyl
seismic seismicvehicular
vehicular Joint Covers with resilient inserts
way
ent
6-way
movement
4-way
movement
movement
6-way movement
6-way movement
Wall member have a flush surface when the
40mm factory drilled joint is at its nominal width, how-
to accept
ever resilient inserts may cause
countersunk
head 6.5mm maintenance issue in areas of
CA-6 Optional VWS fixings high traffic or constant move-
Cast-In Water Gutter
Anchor ment and are limited to interior
(optional) F A applications.
The Latham Surface Line Series of expansion joint covers are specifically designed for applications where recesses are not possible either
through the design of the building, the substrate material or where recesses have been overlooked. The Mechanical Systems in the range
allow 6 way movement, whilst the surface fixed products generally cover 2 directional movement. The systems offer thermal and structural
movement and shrinkage and will accommodate limited seismic movement. Systems are available in Stainless Steel, Aluminium, Brass
and various shallow cover plate inserts, to complement most facets of architectural design, whilst incorporating the required movement
element. Surface-Line Series Floor and Floor-to-Wall Expansion Joint Covers should be considered with Wall-Line Series wall and ceiling
expansion joint covers.
Email: joints@latham-australia.com
The Latham GXA, GXS, GXAL GXS Surface-Line Series
www.latham-australia.com
and GXSL Surface-Line Series
floor and floor-to-wall expansion
joint covers are available with
B
stainless
multi directional multi directional
2-way movement 4-way movement
steel
multi directional
multi
2-way 4-way
movement
2-waymovement
and
multi directional
multidirectional
directional
aluminium
multi
4-way 6-way
movement movement
4-waymovement
multi directional
multidirectional
directional multi indoor
4-way movement
movement
multi
use directional
directional multi directional
outdoor
6-way movement
4-way movement
use
6-way movement
indoor
water use
indoor use
gutter outdoor outdoor
use
fire rated water
use gutter
water gutter
seismic fire ratedfire ratedseismic seismicvehicularvehicular
vehicular
E F C G
cover plates.
22 Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing.
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
20mm 6mm
The series is designed to be
installed into a minimal recess,
16mm or providing the joint width is
A
Side member factory drilled to accept
62mm or larger, the system can
D
countersunk head 6.5mm fixings at simply hang over the edge of the
approximately 475mm centres slabs and no recess is required,
making it ideal for existing or new
Illustrated FXS-25. All mechanical expansion joint fixings by others. to existing applications as well
Stainless Aluminium as installation on non standard
Total Available Cover Plate
Steel Code Code A B C D E F Movement Overall Depth substrates like steel and glass.
Movement Thickness
smooth deck ribbed deck
These systems are designed to
FXS-25 FXA-25 25 146 75 49 20 18 +25/-15mm 40mm Surface Mounted 3mm
finish flush with the surrounding
FXS-50 FXA-50 50 191 100 49 20 18 +/-25mm 50mm Surface Mounted 3mm
floor finish. The system can be
FXS-75 FXA-75 75 216 125 49 20 18 +/-25mm 50mm Surface Mounted 3mm
FXS-100 FXA-100 100 241 150 49 20 18 +/-25mm 50mm Surface Mounted 3mm suitably packed up to height if
FXS-150 FXA-150 150 291 200 49 20 18 +/-25mm 50mm Surface Mounted 4mm required. When the expansion
Wider joint widths available on request. All dimensions are in millimetres. joint width is 50mm or wider,
the series can accommodate the
Locate a profile in our product index listing Latham Fire Barrier System ( ).
Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing. 23
Standard Floor Expansion Joint Covers Stainless Steel, Aluminium, Brass
Email: joints@latham-australia.com
The Latham EXA, EXS, EXAL EXS Surface-Line Series
www.latham-australia.com
and EXSL Surface-Line Series B
floor and floor-to-wall expansion C
Vinyl
joint covers are available with
aluminium,
multi directional multi directional
2-way movement 4-way movement
stainless
multi directional
multi
2-way 4-way
movement
2-waymovement
multi directional
multidirectional
directional
steel
multi
4-way 6-way
movement movement
4-waymovement
and
multi directional
multidirectional
directional multi indoor
4-way movement
movement
multi
use directional
directional multi directional
outdoor
6-way movement
4-way movement
use
6-way movement
indoor
water use
indoor use
gutter outdoor outdoor
use
fire rated water
use gutter
seismic Optional
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
vehicular
20mm 3mm
double bevel
brass cover plates (best suited (Specify)
to carpet applications where the A
16mm
side members can not be seen). Side member factory drilled
D to accept countersunk head
The series is designed to be 6.5mm fixings at approximately
475mm centres
installed into a minimal recess, B
or providing the joint width is C
Carpet
62mm or larger, the system can
Larger movement
simply hang over the edge of the
capacities are available.
slabs and no recess is required. 3mm 20mm
Contact your Latham
This makes it ideal for existing
A Representative to
or new to existing applications,
16mm discuss your application.
as well as installation on non Side member factory drilled
D to accept countersunk head
standard substrates like steel 6.5mm fixings at approximately
and glass. When the expansion 475mm centres
Illustrated EXS-25 & EXB-25. All mechanical expansion joint fixings by others.
joint width is 50mm or wider
Stainless Aluminium Brass
the series can accommodate the Total Available Cover Plate
Steel Code Code Code A B C D Movement Overall Depth
Movement Thickness
Latham Fire Barrier System ( ). smooth deck ribbed deck Smooth Deck
EXS-25 EXA-25 EXB-25 25 146 75 49 +25/-15mm 40mm Surface Mounted 3mm
During installation we recom- EXS-50 EXA-50 EXB-50 50 171 100 49 +/-25mm 50mm Surface Mounted 3mm
mend that these expansion joint EXS-75 EXA-75 EXB-75 75 196 125 49 +/-25mm 50mm Surface Mounted 3mm
covers are fixed mechanically EXS-100 EXA-100 EXB-100 100 221 150 49 +/-25mm 50mm Surface Mounted 3mm
ments in 6 directions. The actual Illustrated EXSL-25. All mechanical expansion joint fixings by others.
movement available will depend Stainless Aluminium Brass
Total Available Cover Plate
on the physical structural joint Steel Code Code Code A B C D Movement
Movement
Overall Depth
Thickness
smooth deck ribbed deck Smooth Deck
width and the installation width
EXSL-25 EXAL-25 EXBL-25 25 85 50 49 +/-20mm 40mm Surface Mounted 3mm
for the expansion joint cover.
EXSL-50 EXAL-50 EXBL-50 50 110 75 49 +/-20mm 40mm Surface Mounted 3mm
EXSL-75 EXAL-75 EXBL-75 75 135 100 49 +/-20mm 40mm Surface Mounted 3mm
EXSL-100 EXAL-100 EXBL-100 100 160 125 49 +/-20mm 40mm Surface Mounted 3mm
EXSL-150 EXAL-150 EXBL-150 150 210 175 49 +/-20mm 40mm Surface Mounted 4mm
Larger movement capabilities and joint widths available on request. All dimensions are in millimetres.
24 Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel, aluminum or brass. Refer to detail drawing.
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
nal
ulti directional
multi directional
multi directional
multi directional indoor
multi use
directional
outdoor use indoor
water
usegutteroutdoor
fireuse
rated water gutter
seismic fire rated
vehicular seismic vehicular
way
ent movement
4-way movement
6-way movement
4-way movement 6-way movement
50mm
Factory
Typical vinyl B
drilling
installation available
on request
Factory drilling 4mm
available on request A
Illustrated BSL-10.
Latham
Neoprene-X-Pansion
Loc /Tile Strips & Major
Movement Systems
Locate a profile in our product index listing
Designs and specifications subject to change without notice. 25
Surface Mounted Floor Expansion Joint Covers Aluminium SURFACE MOUNTED
Email: joints@latham-australia.com
The Latham Sur face-Line ASC-10 Surface-Line Series
www.latham-australia.com
ACS-10 aluminium surface
mounted slip joint cover is B
where limited horizontal move- Factory drilling 6mm insert for 15mm
Carpet available on request
ment is expected. The cover will carpet installation
Rigid
Floor Expansion Joint Covers Aluminium SURFACE MOUNTED
The Latham G-25 and G-25A
with abrasive inserts Surface-
G-25 Surface-Line Series
Line Series floor slip joint cov-
ers offer 2 directional movement B
and are specially designed for
gymnasium typemultiapplications,
multi directional directional multi directional multi directional
multi directional indoor
multi directional
use outdoor
multi
usedirectional
water gutter
multi directional
fire rated seismic
indoor use vehicular
outdoor use water gutter fire rated seismic vehicular
where the vibration and move-
2-way movement 4-way movement 4-way movement 6-way movement
2-way movement 4-way movement 4-way movement 6-way movement
Special
Applications
Latham Australia Pty Ltd
n ey
our, Syd
ing Harb
t Brid ge, Darl
P yrmon
Footpath Junction
The Latham Carpet-Line Series offers a range of Expansion Joint Covers that are suited to most floor and floor-to-wall applications in
carpet flooring. The systems offer generous thermal and structural movement and shrinkage and will accommodate limited seismic move-
ment. Systems are available in Stainless Steel, Aluminium and Brass and with an insert plate in direct stick carpet applications to comple-
ment most facets of architectural design, whilst incorporating the required movement element. Carpet-Line Series floor and floor-to-wall
expansion joint covers should be considered with Wall-Line Series wall and ceiling expansion joint covers.
Email: joints@latham-australia.com
The Latham Carpet-Line RCB Carpet-Line Series
www.latham-australia.com
Series Standard 30mm deep
floor and floor-to-wall expan-
sion joint covers are available
with aluminium
multi directional
2-way movement
2-way movement
side
multi directional
multi multi member
directional
4-way movement
directional
4-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
28 Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel, aluminum or brass. Refer to detail drawing.
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing. 29
Carpet View Floor Expansion Joint Covers Aluminium
Email: joints@latham-australia.com
The Latham Carpet-Line Inlay SCA Carpet-Line Inlay Series
www.latham-australia.com
Series 39mm deep floor and
floor-to-wall expansion joint
covers are available in alumini-
um. This2-way
series
multi
movement
can
directional
2-way movement
multicarry
multi directional directional
4-way movement
a4-way
4-way movement
VWS
multi directional
multi directional
multi directional
movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
The systems offer various move- Floor-to-Wall Expansion Joint Covers Aluminium
ments in 6 directions. The actual
SCAL Carpet-Line Inlay Series Latham Australia Pty Ltd
movement available will depend
on the physical structural joint
width and the installation width B
for the expansion joint cover. For
C
full details of2-way
themovement
multi directional
2-way movement
joint covers
multi directional
multi directional
4-way movement
see
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional multi directional indoor use
6-way movement
4-way movement 6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
D A
The Latham Wall-Line Series of expansion joint covers are specifically designed for wall and ceiling applications. There are a variety of
systems which range from spring fixings details to mechanical fixed details in full aluminium or aluminium and Santoprene inserts. Some
systems in the range allow 6 way movement, whilst the surface fixed products generally cover 2 directional movement. The systems offer
thermal and structural movement and shrinkage and will accommodate limited seismic movement.
Email: joints@latham-australia.com
The Latham Wall-Line Series K Wall-Line Series
www.latham-australia.com
Standard wall and ceiling
expansion joint covers are for
internal and external applica-
tions. As2-way
standard
multi directional
movement
2-way movement
alldirectional
multi directional
multi visual
multi
4-way movement
4-way movement
sur-
directional
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular B
faces come with a 20 micron C
clear anodised finish (standard)
16mm
or brass colour anodised finish
(specify brass colour finish). The Base plate
standard K & L ranges are 16mm drilling by others
deep and can carry a water/wind Add D to increase the overall depth
barrier ( ) if required. from 16mm to 18mm e.g. 25KD. Optional BFG A
Water / Wind Barrier
The range can be installed flush
internally with 16mm wall board
Illustrated 25K. All mechanical expansion joint fixings by others.
or the curvature of the profile
13mm board will appear almost Aluminium
A B C Movement
Total Available Overall
flush, surface mounted or Code Movement Depth
nal
ulti directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
way
ent movement
4-way movement
6-way movement
6-way movement
Email: joints@latham-australia.com
The Latham Wall-Line S and S Wall-Line Series
www.latham-australia.com
SL Series Surface Mounted
wall and ceiling expansion joint
Interior Applications Only.
covers are generally for internal
multi directional multi directional multi directional multi directional
multi directional indoor
multi directional
use outdoor
multi
usedirectional
water gutter
multi directional
fire rated seismic
indoor use vehicular
outdoor use water gutter fire rated seismic vehicular
applications only,4-way
2-way movement although
movement 4-way they
movement 6-way movement
2-way movement 4-way movement 4-way movement 6-way movement
application where Latham type Type 75SL 75 150 +/-50mm 100mm 6mm
Type 100SL 100 150 +/-40mm 80mm 6mm
water and wind barrier are not B
All dimensions are in millimetres.
required.
Wall & Ceiling Expansion Joint Covers Aluminium spring clip at approximately
500mm centres, which make the
SCL Wall-Line Series Corner Wall profiles virtually impossible to
remove once installed.
Latham Australia Pty Ltd
SAC Wall-Line Series Accoustic Ceiling The SAC and SACL Series are
generally installed in acoustic
ceiling type applications or in
Snap-In. paneled ceilings with ceiling
ulti directional multi directional
multi directional indoor
multi directional
use outdoor
multi
usedirectional
water gutter
multi directional
fire rated seismic
indoor use vehicular
outdoor use water gutter fire rated seismic vehicular Tees. They are held in posi-
2-way movement 4-way movement 4-way movement 6-way movement
way movement 6-way movement
tion with a tough stainless steel
A spring clip at approximately
Illustrated Type 25SAC. All mechanical expansion joint fixings by others. Stainless steel
spring clips 500mm centres, which make the
(supplied) to be
Email: joints@latham-australia.com
maximum
Type 25SAC 25 66 +/-25mm 50mm 6mm 500mm centres
Type 50SAC 50 116 +/-30mm 60mm 6mm
All dimensions are in millimetres.
B
Snap-In.
ulti directional multi directional
multi directional indoor
multi directional
use outdoor
multi
usedirectional
water gutter
multi directional
fire rated seismic
indoor use vehicular
outdoor use water gutter fire rated seismic
way movement 6-way movement
2-way movement 4-way movement 4-way movement 6-way movement
Stainless steelvehicular A
spring clips
(supplied) to be
installed at
Illustrated Type 25SACL. All mechanical expansion joint fixings by others.
maximum
Aluminium Total Available Coverplate 500mm centres
A B Movement
Code Movement Depth
B
Designs and specifications subject to change without notice. 35
Resilient Inserts Wall & Ceiling Expansion Joint Covers Aluminium
Email: joints@latham-australia.com
DVL range includes a spring
steel tie bar which ensures the
www.latham-australia.com
Santoprene inserts dont sag. Wall & Ceiling Expansion Joint Covers Aluminium
The VL and DVL ranges are
suitable for interior or exterior
AW-25 Wall-Line Series
applications.
Interior Applications Only.
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement
16mm
All mechanical expansion joint fixings by others.
A
Aluminium Total Available
A Movement
Code Movement Illustrated AW-25.
AW-25 25 +/-12mm 25mm
All dimensions are in millimetres.
Optional
Interior / Exterior Applications. Wind/Water Barrier
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement
T3
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
T3
Latham Australia Pty Ltd
T3
T3
T2 T2
( o r ig in a
l) T1 ( af te r a re fu rb
T1 in th e la te 90 s )
All the Roof-Line Series joint covers come standard with a water/wind barrier and top seal gaskets for the centre plate screw of the flat
roof cover. All Latham Roof-Line Series flat roof and roof-to-parapet covers are supplied with 1 splice plate per full length which is for
installation over the junction between 2 plates to maintain water tightness. As standard the Roof-Line Series covers are supplied in mill
finish aluminium, although they can be successfully powder coated or anodised to harmonize with the surrounding finishes. End Closures,
Transition Splices, Corners and Tees should be considered for all Roof Lines Series expansion joint covers.
Email: joints@latham-australia.com
The Latham Roof-Line Series FW Roof-Line Series
www.latham-australia.com
Shallow aluminium roof and
roof-to-parapet range of expan-
sion joint covers can be installed
B
on a flat slab
multi directional
2-way movement 4-way
ordirectional
multimulti
2-way
hob.
directional
movement
movement
multimulti
4-way
directional
4-way
directionalmultimulti
movement
movement 6-way
directional
4-way
directional
movement
movement
multi
indoor
directional
use
6-way movement
outdoor use
indoor use
water gutter
outdoor use
fire rated
water gutter
seismicfire ratedvehicularseismic vehicular
Splice cover
Flashing and Wall member ous up stands are used and the
caulking by others factory drilled
to accept expansion joint width is 50mm
nalmultimulti directional
directional multi
indoor
directional
use outdoor use
indoor use
water gutter
outdoor use
fire rated seismicfire ratedvehicularseismic
water gutter vehicular countersunk
ent
6-way
4-way
movement
movement 6-way movement head 6.5mm or wider, the series can accom-
fixings
modate the Latham Fire Barrier
167mm
Splice
System ( ).
cover
Email: joints@latham-australia.com
The Latham Roof-Line Series FP Roof-Line Series Larger movement capacities are available.
Contact your Latham Representative to
www.latham-australia.com
Standard aluminium roof and
roof-to-parapet range of expan- discuss your application.
sion joint covers offer the best
protection
multi directional
2-way movement 4-way
against
multimulti
directional
2-way
movement
movement
water
directionalmultimulti
4-way
directional
4-way
movement
movement
pen-
directionalmultimulti
6-way
directional
4-way
directional
movement
multi
indoor
directional
use
movement 6-way movement
outdoor use
indoor use
water gutter
outdoor use
fire rated
water gutter
seismicfire ratedvehicularseismic vehicular
B
End Closure - Wall Terminates End Closure - Flat Roof E.J.C. End Closure - Wall Continues
expansion joint
www.latham-australia.com
The Latham PAVA-InLay Series Expansion Joint Covers offer an architecturally appealing outcome particularly for wider joint systems.
They are suited to sand cement bed tilling and cement tile and paving applications, but can be equally effective with other forms of floor
finishes like, carpet, vinyl, rubber, epoxy and even direct stick carpet. The systems offer generous thermal and structural movement and
shrinkage. They also will accommodate limited seismic movement. The standard systems are available in Aluminium and Brass to com-
plement most facets of architectural design, whilst incorporating the required movement element. Latham can also manufacture custom
designs, examples of of which can be found on page 45.
Email: joints@latham-australia.com
The Latham PAVA Series SGAL PAVA-Inlay Series
www.latham-australia.com
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicveh
SGAL floor and SGALL floor- 2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement
F
superior to other similar inlay E
SUITABLE FILL
joint covers available that require
sealant inserts. Sealant inserts
I
do not cope with movement and Side members
traffic. Sealant inserts depress factory drilled to
accept countersunk
or de-bond over time. The head 8mm fixings at
approximately
Sanatprene inserts ensure that 400mm centres
even with movement occurring H Optional BFG Water Gutter
G A
the expansion joint covers look
neat and tidy and continue to Illustrated SGAL-100. All mechanical expansion joint fixings by others.
perform without requiring main-
Aluminium Total Available
tenance. The Santoprene inserts A B C D E F G H I Movement
Code Movement
are available in grey (standard),
SGAL-50 (TM) 50 418 77 65 65 50 28 185 30 +/-20mm 40mm
buff and black on specification.
SGAL-75 (TM) 75 443 77 65 65 50 28 185 30 +/-20mm 40mm
This Series can carry a BFG SGAL-100 (TM) 100 468 77 65 65 50 28 185 30 +/-20mm 40mm
SGAL-150 (TM) 150 518 77 65 65 50 28 185 30 +/-20mm 40mm
water gutter ( ) and, if required,
SGAL-200 (TM) 200 568 77 65 65 50 28 185 30 +/-20mm 40mm
the Series can accommodate
All dimensions are in millimetres.
the Latham Fire Barrier System
( ) when the installation joint
Selection Code
20mm
SGALL-75 (TM) 75 259 77 65 65 50 28 185 30 +/-10mm 20mm
SGALL-100 (TM) 100 284 77 65 65 50 28 185 30 +/-10mm 20mm
SGALL-150 (TM) 150 334 77 65 65 50 28 185 30 +/-10mm 20mm
SGALL-200 (TM) 200 384 77 65 65 50 28 185 30 +/-10mm 20mm
grey black beige All dimensions are in millimetres.
42 Designs and specifications subject to change without notice.
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
multi directional
multi directional
2-way movement
2-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional
6-way movement
6-way movement
indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
to-wall expansion joint covers
fire ratedfire ratedseismic seismicvehicularvehicular
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
2-way movement
2-way movement
4-way movement
4-way movement
4-way movement
4-way movement
6-way movement
6-way movement
B
C
D
Wall member
STONE/TILE INLAY factory drilled
G H E to accept
SUITABLE FILL countersunk
head 6.5mm
Pack with high strength non fixings
F
shrink grout
BFG
Side members
Water Gutter
factory drilled with
10mm holes at
approximately
400mm centres
I A
All mechanical expansion joint fixings by others.
Email: joints@latham-australia.com
The Latham PAVA Series BSMP PAVA-Inlay Series
www.latham-australia.com
BSMP floor and BSMPL floor-
to-wall expansion joint covers multi directional
multi directional
2-way movement
2-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicveh
overall depth below the finished All mechanical expansion joint fixings by others.
floor height is 63mm. Brass Code Total Cover
A B C D E F G H I Movement
Serrated Flange Movement Thickness
The Latham PAVA Series
Standard floor and floor-to-wall BSMP-25 25 261 200 31 12 22 41 37 100 +20/-15mm 35mm 4mm
expansion joint covers are BSMP-50 50 261 200 31 12 22 41 37 100 +/-20mm 40mm 4mm
designed for normal pedestrian BSMP-50 75 261 200 31 12 22 41 37 100 +/-20mm 40mm 4mm
BSMP-100 100 261 200 31 12 22 41 37 100 +/-20mm 40mm 4mm
applications such as airport ter-
All dimensions are in millimetres.
minals, office buildings, hotels,
foyers, stadiums and shopping
B
C
STONE/TILE INLAY
E
G H Wall member
SUITABLE FILL
factory drilled
to accept
countersunk
F head 6.5mm
fixings
Latham
Neoprene-X-Pansion
Loc /Tile Strips & Major
Movement Systems
The Latham Light Duty Series of expansion joint covers incorporate Santoprene and Neoprene inserts to allow limited movement in internal
light duty applications. They are suited to floor, floor-to-wall, wall and ceiling applications where limited movement capabilities are re-
quired. The systems interact with each other, which means a similarly designed system can be used in the floor, wall and ceiling if required.
The systems offer 4 directional movement and limited thermal and structural movement.
Resilient Light Duty Expansion Joint Covers Aluminium Interior Applications Only.
Email: joints@latham-australia.com
The Latham Resilient Jointing 50-FDR & 50-FDRW
www.latham-australia.com
System, for floor, floor-to-wall, B F
B
wall and ceiling applications. C C
Side members Side members
Wall members
The series is for internal light factory drilled factory drilled
factory drilled to
with 10mm holes with 10mm holes
duty applications only. E at approximately
E
at approximately accept 8 guage
475mm centres 475mm centres screw & plug at
approximately
The 50-Series joint covers allow 475mm centres
a maximum of 5mm of horizon- on request
A
tal movement. These systems
D D A
are for light duty, low traffic
applications only, where limited All mechanical expansion joint fixings by others.
movement is expected. If high
Aluminium Total Available Overall
pedestrian traffic is expected A B C D E F Movement
Code Movement Depth
or considerable multi directional
50-FDR 50 48 42 50 50 +/-5mm 10mm 50mm
movement is required, an expan- 50-FDRW 50 45 42 50 50 38
multi directional
+/-5mm
2-way movement
multi directional
10mm
multi directional
multi directional
88mm
4-way movement 4-way movement
multi directional
2-way movement
multi directional indoor
6-way movement
multi use
directional
outdoor
multi
4-way movement 4-way movement 6-way movemen
usedirectiona
wate
grey black beige Illustrated 50-FDR (20) & 50-FDRW (20). All mechanical expansion joint fixings by others.
Light Duty Expansion Joint Covers Brass Clad Interior Applications Only.
Resilient Brass Clad
B50-FDR & B50-FDRW The Latham Resilient Brass
B Clad Jointing System, for floor,
Latham Australia Pty Ltd
B F
floor-to-wall, wall and ceiling
C C
Side members Side members
applications.
factory drilled factory drilled Brass anodised
with 10mm holes
E
with 10mm holes wall members The series is for internal light
E at approximately at approximately factory drilled to
475mm centres 475mm centres accept 8 guage duty applications only.
screw & plug at
approximately
475mm centres The 50-Series joint covers allow
A
on request a maximum of 5mm of horizon-
D D A tal movement. These systems
All mechanical expansion joint fixings by others. are for light duty, low traffic
applications only, where limited
Aluminium Total Available Overall
A B C D E F Movement movement is expected. If high
Code Movement Depth
pedestrian traffic is expected
B50-FDR 50 50 42 50 51 +/-5mm 10mm 51mm
B50-FDRW 50 46 42 50 51 38
multi directional
+/-5mm
2-way movement 4-way
multi directional
10mm
multi directional
multi directional
89mm
movement 4-way movement
multi directional
2-way movement
multi directional indoor
6-way movement
multi use
directional
outdoor
multi
4-way movement 4-way movement 6-way movement
useor considerable
directional
water gutter indoor
fire rated
use multi
outdoor
seismicdirectional
use water
vehicular
gutter fire rated
D A D A on request
www.latham-australia.com
Light Duty Expansion Joint Covers Brass Clad Interior Applications Only.
Surface Mounted Light Duty Expansion Joint Covers Aluminium Interior Applications Only.
Email: joints@latham-australia.com
The Latham Resilient Surface 50-FCSR & 50-FCWSR (Carpet)
www.latham-australia.com
Mounted Series joint covers
B
should be laid on a bedding F B
E C E Carpet C
compound such as Latham Carpet
shape. That means the joint runs All dimensions are in millimetres.
across the floor, up both walls
and across the ceiling. In this
Light Duty Expansion Joint Covers Aluminium
situation the rubber insert can
continue around the box.
Type 50-WR & Type 50-WCR (Wall & Ceiling)
D
A
A
Wall or Wall or
Ceiling G Ceiling G
Wall or
E C E C Ceiling
48
our product index listing All dimensions are in millimetres.
Designs and specifications subject to change without notice.
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
B F
C C wall and ceiling applications.
Wall members
factory drilled to
The series is for internal light
E E accept 8 guage duty applications only.
screw & plug at
Side members Side members approximately
factory drilled factory drilled 475mm centres The 70-Series joint covers allow
with 10mm holes with 10mm holes on request
at approximately at approximately a maximum of 10mm of hori-
475mm centres 475mm centres
zontal movement.
D A D A
These systems are for light
All mechanical expansion joint fixings by others.
duty, low traffic applications
Aluminium Total Available Overall only, where limited movement
A B C D E F Movement
Code Movement Depth
is expected. If high pedestrian
70-FDR 70 71 65 50 50 +/-10mm 20mm 50mm traffic is expected or consid-
multi directional multi directional multi directional
multi directional
multi directional
multi directional indoor
multi use
directional
outdoor
multi
usedirectional
water gutter indoor
fire rated
use outdoor
seismic
use water
vehicular
gutter fire rated
70-FDRW 70 68 65 50 50 38 +/-10mm
2-way movement 4-way 20mm 88mm
movement 4-way movement
2-way movement 4-way movement 4-way movement 6-wayerable
6-way movement movement multi directional move-
All dimensions are in millimetres.
ment is required an expansion
joint cover from one of Lathams
Light Duty Expansion Joint Covers Aluminium Interior Applications Only. Mechanical Ranges should be
considered.
70-FDR(30) & 70-FDRW (30) B
The series is supplied in
B F 4000mm lengths and as stan-
C C dard the replaceable synthetic
Wall members rubber inserts are grey with alu-
E E factory drilled to
accept 8 guage
minium (beige or black can be
Side members factory Side members factory
drilled with 10mm drilled with 10mm screw & plug at supplied on request).
holes at approximately approximately
holes at approximately
475mm centres
475mm centres 475mm centres
on request The 70-Series offers the oppor-
D A D A
Email: joints@latham-australia.com
Resilient Brass Clad Light Duty Expansion Joint Covers Brass Clad Interior Applications Only.
Email: joints@latham-australia.com
The Latham Resilient Brass B70-FDR & B70-FDRW B
www.latham-australia.com
Clad Jointing System, for floor, F
B
floor-to-wall, wall and ceiling C C
applications. Brass anodised
wall members
The series is for internal light E E factory drilled to
accept 8 guage
duty applications only. Side members screw & plug at
factory drilled approximately
Side members factory
with 10mm holes 475mm centres
The 70-Series joint covers allow drilled with 10mm
at approximately
holes at approximately on request
475mm centres
a maximum of 10mm of hori- 475mm centres
D A D A
zontal movement. These sys-
tems are for light duty, low traffic All mechanical expansion joint fixings by others.
applications only, where limited
Aluminium Total Available Overall
movement is expected. If high A B C D E F Movement
Code Movement Depth
pedestrian traffic is expected
B70-FDR 70 75 65 50 51 +/-10mm 20mm 50mm
or considerable multi directional B70-FDRW 70 70 65 50 51 38 multi directional
+/-10mm multi directional
20mm multi directional
multi directional
89mm multi directional
multi directional indoor
multi use
directional
outdoor
multi
usedirectiona
wate
2-way movement 2-way movement
4-way movement 4-way movement 4-way movement 4-way movement 6-way movemen
6-way movement
movement is required an expan- All dimensions are in millimetres.
sion joint cover from one of
Lathams Mechanical Ranges
should be considered. Light Duty Expansion Joint Covers Brass Clad Interior Applications Only.
Selection
B70-FDRW (30) 70 70 65 50 31 38 +/-10mm
multi directional
2-way movement
20mm
multi directional
69mm
multi directional
multi directional
4-way movement 4-way movement
multi directional
2-way movement
multi directional indoor
6-way movement
multi use
directional
outdoor
multi
4-way movement 4-way movement 6-way movemen
usedirectiona
wate
Light Duty Expansion Joint Covers Brass Clad Interior Applications Only.
E E Brass anodised
wall members
factory drilled to
A A
accept 8 guage
Side members factory Side members factory screw & plug at
D drilled with 10mm drilled with 10mm approximately
D
holes at approximately holes at approximately 475mm centres
475mm centres 475mm centres on request
B F B
E C E Carpet C
should be laid on a bedding com-
Carpet
pound such as Latham Tytred
G G 2, or glued down with Latham
A A Titazel Thixotropic Epoxy Resin
D D Adhesive, both in conjunction
Factory drilling available on request Factory drilling available on request with stainless steel screws and
plastic plugs or mechanical
70-FTSR & 70-FTWSR (Surface Mounted) fixings.
70-FCSR 70 71 65 141 8 10 +/-10mm 20mm 18mm The 70-Series offers the oppor-
70-FCWSR 70 68 65 106 8 36 10 +/-10mm 20mm 46mm tunity to use the most similar
70-FTSR 70 71 65 141 3 20 +/-10mm 20mm 23mm joint cover in the wall and ceiling
70-FTWSR 70 68 65 106 3 36 20 +/-10mm 20mm 56mm
multi directional multi directional multi directional
multi directional
multi directional
multi directional indoor
multi use
directional
outdoor
multi
useto thegutterfloor.
directional
water indoor Thisoutdoor
fire rated
use is particularly
seismic
use water
vehicular
gutter fire rated
70-FTVR 70 71 65 125 3 20 2-way+/-10mm
movement 4-way movement 20mm4-way movement23mm
2-way movement
6-way movement
4-way movement 4-way movement 6-way movement
effective when the construc-
70-FTWVR 70 68 65 98 3 36 20 +/-10mm 20mm 56mm
All dimensions are in millimetres.
tion joint forms a square box
shape, which means the joint
runs across the floor, up both
Light Duty Expansion Joint Covers Aluminium walls and across the ceiling. In
this situation the rubber insert
Type 70-WR & Type 70-WCR (Wall & Ceiling) can continue around the box.
D
A A
Wall or Wall or
Ceiling G Ceiling G Wall or
Ceiling
E C
B F
E
B
C
Wall & Ceiling
D
Factory drilling available on request
All mechanical expansion joint fixings by others. Factory drilling available on request
Email: joints@latham-australia.com
on a bedding compound such as 30-FDR 15 36 30 40 45 +/-2mm 4mm 45mm
multi directional multi directional multi directional
multi directional
multi directional
multi directional indoor
multi use
directional
outdoor
multi
usedirectiona
wate
Latham Tytred 2, or glued down 30-FDRW 40 50 30 40 45 40 +/-2mm 4mm 85mm
www.latham-australia.com
2-way movement 4-way movement 4-way movement
2-way movement
6-way movement
4-way movement 4-way movement 6-way movemen
Retrofit Light Duty Expansion Joint Covers Aluminium Interior Applications Only.
G G G
A A
A
Factory drilling available on request Factory drilling available on request Factory drilling available on request
Locate a profile in
our product index listing
30-FVSR & 30-FVWSR Light Duty
15mm
D
D
B F
B
E C Vinyl E C
G G
A A
Factory drilling available on request Factory drilling available on request
Singapore Expo
The Latham Heavy Duty Series offers a range of Aluminium and Stainless Steel Expansion Joint Covers suited to most heavy duty pe-
destrian car and truck applications. The systems in the range offer 6 way movement, whilst offering generous thermal and structural
movement and shrinkage and will accommodate limited seismic movement. Systems are available in stainless steel and aluminium to
complement most facets of architectural design, whilst incorporating the required movement element. The systems in the range offer 6
way movement.
Email: joints@latham-australia.com
The Latham HHS and HHA HHS Heavy Duty Pedestrian
www.latham-australia.com
Heavy Duty Pedestrian expan-
sion joint covers are specifically multi directional
multi directional
2-way movement
2-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional
4-way movement
4-way movement
multi directional
multi directional indoor use
6-way movement
6-way movement
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicve
Optional BFG
Suitably Water Gutter
packed
F A
B
D C
E
50mm
Illustrated HDS-50 & HD-50. All mechanical expansion joint fixings by others.
Designs and specifications subject to change without notice. Coverplate thickness may vary from stainless steel to aluminum. Refer to detail drawing. 55
Heavy Vehicle Floor Expansion Joint Covers Stainless Steel
Email: joints@latham-australia.com
The Latham EHDF and NBEHDF EHDF Series - Warehouse
www.latham-australia.com
Heavy Vehicle expansion joint
multi directional multi
multi
directional
multi
directional
directional
multi
multi
directional
multi
directional
directional
multi
multi
directional
multi
directional
directional
multi directional
multi
indoor
directional
use outdoor
indoor use
use
indoor use
water
outdoor
gutter
outdoor
use water
use
fire rated
gutter
water gutter
fire
seismic
ratedfire ratedvehicular
seismic seismicvehicularvehicular
covers are designed for areas of 2-way movement2-way 4-waymovement
2-way
movement
movement
4-way
4-way
movement
4-way
movement
movement
4-way
6-way
movement
4-way
movement
movement
6-way movement
6-way movement
Factory
Fabrications
Latham Australia Pty Ltd
TEE
Factory welded
and fabricated
for effective
performance
Designs and specifications subject to change without notice. 57
Car Joint Series DURABLE | CORROSIVE RESISTANT | WEAR RESISTANT
Car Joint System For pasenger car & light commercial vehicles
Email: joints@latham-australia.com
RTJ-1 Series Car Joint multi directional multi directional multi directional multi directional
multi directional multi directional
indoor usemulti outdoor
directional
multi directional
use multi
water
directional
gutter
multi directional
multi
fire rated
directional seismic
indoor use
multi directional
outdoor use
vehicular
water gutter
indoor use
fire rated
outdoo
s
www.latham-australia.com
2-way movement 4-way movement 4-way movement 6-way movement 2-way movement 4-way movement 4-way movement 6-way movement
2-way movement 4-way movement 4-way movement 6-way movement
Contact your Latham Representative to discuss the application and specification of this system.
USETM-50 Series Car Joint multi directional multi directional multi directional
2-way movement 4-way movement 4-way movement
multi directional
multi
multi
2-way movement
2-way
6-way
directional
directional
multi directional
movement
movement
multi directional
4-way movement
indoor
4-way movement
multiuse
directional
multioutdoor
4-way movement
directional
4-way movement
multi
use directional
multi
water
6-way movement
directional
gutter
6-way movement
indoor
fire rated
use
indoor use
outdoor
seismic
outdoor
use water
use
vehicular
gutter
water gutter
fire ratedfire rated se
The Latham BEJ Series Bridge expansion joint is supplied in 1220mm lengths, it is designed for long durability, with the
metal subsections encased in rubber to ensure the product has good corrosive resistant properties.
SER Series Heavy Duty multi directional multi directional multi directional
2-way movement 4-way movement 4-way movement
multi directional
multi
multi
2-way movement
2-way
6-way
directional
directional
multi directional
movement
movement
multi directional
4-way movement
indoor
4-way movement
multiuse
directional
multioutdoor
4-way movement
directional
4-way movement
multi
use directional
multi
water
6-way movement
directional
gutter
6-way movement
indoor
fire rated
use
indoor use
outdoor
seismic
outdoor
use water
use
vehicular
gutter
water gutter
fire ratedfire rated
The Latham SER Series Heavy Duty Steel Enclosed Rubber Expansion Joint Covers are designed to control movement in
roadway type applications. These systems are designed to accommodate high speed vehicular traffic. If the application is slow
vehicular and pedestrian like a shopping centre car park, Latham recommend the use of a mechanical expansion joint cover; con-
sider details on page 55-58 of this publication. The various sizes available are suitable for joint width from 50mm to over 200mm.
Illustrated SER-50.
SER 100 102mm 1830mm 590mm 54mm 20mm 152mm 498mm 305mm
SER 165 165mm 2000mm 724mm 74mm 24mm 203mm 618mm 335mm
General Information
The Latham range of seismic expansion joint covers, are designed to accommodate extreme movement that occurs during seismic
activity and earthquakes. They are also commonly used in modern hi-rise structures, that experience excessive movement during
very high winds like typhoons, hurricanes and cyclones. These structures are usually isolated from the ground by base isolators
and are designed to move during these occurrences. Generally structural joint widths designed to accommodate seismic activity
are much wider than normal expansion joints in buildings. The theory behind this is that the slabs of the structure can move large
Email: joints@latham-australia.com
amounts without bashing into each other causing structural damage to the building. The Latham range of Seismic Expansion Joint
www.latham-australia.com
Covers are designed to accommodate this potential movement, with little or no damage to the expansion joint covers, meaning the
structure in relation to the expansion joint covers will be damage free and functioning normally after a seismic or high wind event.
It should be noted that all of the Latham ranges of mechanical expansion joint covers will accommodate some seismic movement,
particularly when the structure is designed with wide joint width to accommodate this potential movement. Although standard
ranges of expansion joint covers may require some maintenance and repair after seismic activity occurs. In some cases design-
ers and owners of the buildings feel it may be better to put in a system that will deal with the movement and require some repair
after a seismic incident, as this generally reduces the width of the expansion joint cover required. Discuss these options further
with your Latham representative.
When it is necessary to install a Seismic Expansion Joint Cover, Latham Seismic Systems offer the best option to deal with the
movement. All of the systems can be custom made to suit different joint widths and allow different amounts of movement to best
suit the design criteria for the structure.
F
to accommodate a 50mm deep E
SUITABLE FILL
inlay. These systems offer both
standard thermal building move-
the structure settles back to its Illustrated SGAL -100 (SM). All mechanical expansion joint fixings by others.
original position the Santoprene Normal Cover
Aluminium Seismic
inserts will easily push back into A B C D E F G H I Everyday Plate
Code Movement
their housings. Movement Thickness
SGAL-50 (SM) 50 418 77 65 65 50 28 185 30 +/-20mm -30mm/+ Unlimited 6mm
The Santoprene inserts are far SGAL-75 (SM) 75 443 77 65 65 50 28 185 30 +/-20mm -50mm/+ Unlimited 6mm
superior to other competing inlay SGAL-100 (SM) 100 468 77 65 65 50 28 185 30 +/-20mm -75mm/+ Unlimited 6mm
joint covers available that require SGAL-150 (SM) 150 518 77 65 65 50 28 185 30 +/-20mm -125mm/+ Unlimited 6mm
sealant inserts which do not cope SGAL-200 (SM) 200 568 77 65 65 50 28 185 30 +/-20mm -175mm/+ Unlimited 6mm
with movement and traffic, and Wider joint widths available on request. All dimensions are in millimetres.
depress or de-bond over time. The Santoprene inserts ensure that even with movement occurring the expansion joint covers look
neat and tidy and continue to perform without requiring maintenance.
The Santoprene inserts are available in grey (standard), buff and black on specification. This Series can carry a BFG water gutter
( ) and if required the Series can accommodate the Latham Fire Barrier System ( ) when the installation joint width is 50mm
or wider. The overall depth below the finished floor height is 65mm. The Latham PAVA Series floor expansion joint covers are
designed for normal pedestrian applications such as airport terminals, office buildings, hotels, foyers, stadiums and shopping
centres. The systems offer various movement in 6 directions.
EXSLSM-100 100 165 225 49 +100/-90mm 190mm 27mm 4mm Locate a profile in
EXSLSM-150 150 215 325 49 +150/-140mm 290mm 28mm 5mm
EXSLSM-200 200 265 425 49 +200/-190mm 390mm 29mm 6mm our product index listing
EXSLSM-250 250 315 525 49 +250/-240mm 490mm 29mm 6mm
EXSLSM-300 300 365 625 49 +300/-290mm 590mm 31mm 8mm
Wider joint widths available on request. All dimensions are in millimetres.
Email: joints@latham-australia.com
The Latham Seismic MSM and MSM Wall-Line Series
www.latham-australia.com
MLSM Wall Series of expan-
Contact your Latham Representative
sion joint covers are designed multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
to discuss the application
2-way movement
and4-way movement
2-way movement
4-way movement 4-way movement
4-way movement
6-way movement
6-way movement
12mm
Wall members
10mm factory drilled
20mm
to accept
Side members countersunk
factory drilled to Optional BFG head 6.5mm
accept countersunk Water Gutter fixings
head 6.5mm fixings 16mm
at approximately
475mm centres C A
Illustrated FWSM-100. All mechanical expansion joint fixings by others. The Latham Seismic FWSM
and FWLSM Roof-Line Series
Aluminium Total Available Overall
A B C Movement of expansion joint covers are
Code Movement Depth
supplied in mill finish aluminium
FWSM-100 100 260 70 +100/-92mm 192mm 36mm
and, on request, the systems
FWSM-150 150 360 70 +150/-142mm 292mm 36mm
FWSM-200 200 460 70 +200/-192mm 392mm 36mm can be anodised or powder
FWSM-250 250 560 70 +250/-242mm 492mm 36mm coated to compliment the archi-
FWSM-300 300 660 70 +300/-292mm 592mm 36mm tectural aesthetics of the design.
Wider joint widths available on request. All dimensions are in millimetres.
The systems offer various move-
ments in 6 directions. The joint
Roof-to-Parapet Expansion Joint Covers Aluminium covers can be custom manu-
factured to suit joint widths and
FWLSM Seismic Series movement requirements of the
Email: joints@latham-australia.com
B structure.
www.latham-australia.com
nal multi directional multi directional indoor use outdoor use water gutter fire rated seismic vehicular Wall member
ent 4-way movement 6-way movement Flashing and factory drilled
120mm caulking by others to accept
Contact your Latham countersunk
Splice cover head 6.5mm
Representative to fixings
discuss the application
and specification of 36mm
this system.
BFG Water Gutter
Side member
factory drilled
with 10mm holes
at approximately
475mm centres C A
Locate a profile in
our product index listing
Illustrated FWLSM-100. All mechanical expansion joint fixings by others.
Email: joints@latham-australia.com
The Latham Seismic XLCS and XLCS Seismic Series
www.latham-australia.com
XLCL Series floor and floor-to-
Contact your Latham Representative
wall of Expansion Joint Covers multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional
multi directional indoor use
indoor use
outdoor outdoor
use water
use gutter
water gutter
fire ratedfire ratedseismic seismicvehicularvehicular
to discuss the application
2-way movement
and4-way movement
2-way movement
4-way movement 4-way movement
4-way movement
6-way movement
6-way movement
Cover Plates
Latham Australia Pty Ltd
* Products marked with this code have a thicker section in the centre of the plate. The size of
this centre thickener section is approximately 12mm wide x 2mm deep. Material can be fac-
tory drilled and fixings can be supplied at additional cost if required.
Cover Cover
Code Material Finish Length
Width Thickness
BD-50* 50mm 3mm Brass Smooth Mill 4000mm
SSD-50 50mm 3mm Stainless Steel Smooth Mill 3050mm
ALD-50* 50mm 3mm Aluminium Ribbed Mill 3050mm
BD-75* 75mm 3mm Brass Smooth Mill 4000mm
SSD-75 75mm 3mm Stainless Steel Smooth Mill 3050mm
ALD-75* 75mm 3mm Aluminium Ribbed Mill 3050mm ALD-50* Cover Plate
BD-100 100mm 3mm Brass Smooth Mill 4000mm 3mm thick ribbed
SSD-100 100mm 3mm Stainless Steel Smooth Mill 3050mm
aluminium with thickener.
ALD-100* 100mm 3mm Aluminium Ribbed Mill 3050mm
50mm x 3050mm.
SSD-125 125mm 3mm Stainless Steel Smooth Mill 3050mm
ALD-125 125mm 4mm Aluminium Ribbed Mill 3050mm SSD-75 Cover Plate
SSD-150 150mm 5mm Stainless Steel Smooth Mill 3050mm 3mm thick smooth stainless steel.
ALD-175 175mm 5mm Aluminium Ribbed Mill 3050mm 75mm x 3050mm.
BD-200 200mm 5mm Brass Ribbed Mill 4000mm
125mm x 3050mm.
www.latham-australia.com
Locate a profile in
our product index listing
When specifying expansion joint covers, architects, engineers and building owners
should specify protection against fire and smoke which can cause considerable dam-
age and loss during building fire. Often this is a government or authority requirement.
Email: joints@latham-australia.com
Fire Rated Systems
www.latham-australia.com
Latham offer Fire Rated Systems (Barriers) to be used in conjunction with the Latham Flexible Mechanical Expansion Joint
Covers. All have been tested and classified by one or more of the following independent, internationally recognised authorities: US
Underwriters Laboratories Inc. (USA), Omega Point Laboratories Inc. (USA), listed by Warnock Hersey International Incorporated
(USA) and listed by The State of California State Fire Marshal. Latham Fire Rated Systems are available with the security of 2 and
4 hour fire ratings for joint widths from 50mm to 1200mm wide.
ASSIFIED
CL
Latham Fire Barriers can be used with most floor, floor-to-wall, wall, roof, roof-to-parapet and ceiling joint covers for a high
degree of design flexibility. Latham Fire Barrier Systems can also be used in shaft wall, curtain wall and chase wall applications.
Membrane type fire barriers allow limited shear movement. Fire rated wall joint covers are available for gypsum, wall board and
masonry construction. Standard Latham Fire Barriers accept limited horizontal shear movement.
Incombustible
The Fire Rated Systems Lathams offer, are fabricated from high quality, inorganic materials. They are incombustible and do not
create smoke or contribute fuel during a fire.
Rigorous Testing
Depending on the Latham 2 and 4 hour Fire Rated Systems and on the site requirements, the Latham Fire Barriers are purpose
manufactured to pass some or all of the following classifications:-
ASTM E119 Fire Test for Building Construction and Materials Latham Australia Pty Ltd
ASTM E1399 Standard Test Method of Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural
Joint Systems
Australian Standard AS1530. Methods for fire tests on building materials, components and structures (Part 4: Fire-resistance
tests of elements of building construction).
Many of the systems Lathams offer are tested for fire rating including vigorous seismic movement both prior and during
the fire test, as well as testing the functionality of the barrier after the tested period with a fire stream hose directed at the
barrier. Many of the fire rated systems Lathams offer, far exceed the standards requirements for similar products around
the world.
Largest Selection
Latham offers joint covers with ratings up to four hours for fire safety; joint covers from 50mm to 1200mm for seismic joints; and
fire barriers to new joints construction, retrofit existing joints, curtain walls, shaft wall and chases. For design flexibility, most of
the Latham range of expansion joint covers can be fire rated.
Contact your Latham representative with your joint and fire rating requirements to allow us to offer suitable systems to meet your
requirements.
SAS Series
Latham Australia Pty Ltd
K Series
Wall & Ceiling
Joint Covers
Fire Barrier
Email: joints@latham-australia.com
50mm
www.latham-australia.com
Fire Barrier
50mm
minimum
Email: joints@latham-australia.com
www.latham-australia.com
Supply and install <aluminium> <brass>, <stainless steel> expansion joint covers where indicated on the drawings. Covers to be
standard units manufactured by Latham Australia Pty. Ltd., 14 Tennyson Road, Gladesville NSW 2111 Australia. Fax: (02) 9879 7666
International: (612) 9879 7666. Telephone: (02) 9879 7888 International: (612) 9879 7888. Email: joints@latham-australia.com.
Floor Covers With Resilient Inserts For Installations In Light Duty Floor Applications and Wall and Ceiling Applications
Light Duty Cover units at floor junction to be Latham Asbraloy Type at flat floor conditions, Latham Asbraloy Type at
floor to wall conditions, Latham Asbraloy Type at wall conditions and Latham Asbraloy Type at ceiling conditions (in mill
finish aluminium alloy 6063-T6). Filler strips shall be secured in place in a manner that will not allow them to become disengaged as
Flexible Heavy Duty Pedestrian and HD Series Car Floor Expansion Joint Covers.
Cover units at floor junction to be Latham Type at flat floor conditions and Latham Type at floor to wall conditions (in
mill finish aluminium alloy 6063-T6 /stainless steel 304). Any filler strips shall be secured in place in a manner that will not allow them
to become disengaged as the expansion joint opens and closes. The cover plate shall be fastened in place in such a manner that
it maintains a constant spring tension at its centre point. This cover must be designed to allow .mm of horizontal movement
and .mm of vertical movement and function correctly during horizontal movements.
All corners, crossovers and tees to be factory mitred, welded and furnished with 500mm legs in each direction. All Covers should
Fax: +61 2 9879 7666 Phone: +61 2 9879 7888
be installed with suitable mechanical or epoxy fixings and should be packed with high strength, no shrink epoxy grout to suit the
site conditions. Ensure that the installation of joint covers is carried out in accordance with Latham Australia Pty Ltd Installation
Instructions for the relevant cover. Covers to be standard units manufactured by Latham Australia Pty. Ltd., 14 Tennyson Road,
Latham Australia Pty Ltd
Gladesville NSW 2111 Australia. Fax: (02) 9879 7666 International: (612) 9879 7666. Telephone: (02) 9879 7888 International:
(612) 9879 7888. Email: joints@latham-australia.com
Flexible Heavy Duty Fork Lift Series Floor Expansion Joint Covers.
Cover units at floor junction to be Latham Type at flat floor conditions and Latham Type at floor to wall conditions
(in stainless steel 304 number 1 finish). The cover plate shall be fastened in place in such a manner that it maintains a constant
spring tension at its centre point. This cover must be designed to allow .mm of horizontal movement and .mm of vertical
movement and function correctly during horizontal movements. This cover must be designed to accommodate loads not exceeding
a standard wheel load ofkg, based on a 300mm diameter by 125mm wide tyre, over a minimum cover length of 1000mm, at a
maximum operating expansion joint width of .mm. All corners, crossovers and tees to be factory mitred, welded and furnished
with 500mm legs in each direction. All Covers should be installed with suitable mechanical or epoxy fixings and should be packed
with high strength, no shrink epoxy grout to suit the site conditions. Ensure that the installation of joint covers is carried out in
accordance with Latham Australia Pty Ltd Installation Instructions for the relevant cover. Covers to be standard units manufactured
by Latham Australia Pty. Ltd., 14 Tennyson Road, Gladesville NSW 2111 Australia. Fax: (02) 9879 7666 International: (612) 9879
7666. Telephone: (02) 9879 7888 International: (612) 9879 7888. Email: joints@latham-australia.com
Technical Manual 43 Ensure that the installation of joint covers is carried out in accordance with Latham Australia Pty Ltd Installation
www.latham-australia.com
Instructions for the relevant cover. Covers to be standard units manufactured by Latham Australia Pty. Ltd., 14 Tennyson Road,
Gladesville NSW 2111 Australia. Fax: (02) 9879 7666 International: (612) 9879 7666. Telephone: (02) 9879 7888 International:
(612) 9879 7888. Email: joints@latham-australia.com
Note: All specifications, should be written in conjunctions with Product Information detailed on pages 6-7 of this publication.
Email: joints@latham-australia.com
BD Series 65 FWSM Series 63
www.latham-australia.com
BEJ Series 59 FXA Series 23
B-FDR Series 47,50 FXAL Series 23
B-FDRW Series 47,50 FXS Series 23
Brass Joints (Solid) 15, 16, 19, 25 FXSL Series 23
Brass Visual Finish 20, 24, 28-29, 44, 47, 50 G-25 Series 26
Bridge and Roadway Series 59 G-25A Series 26
BS Series 25 GXA Series 22
BSL Series 25 GXAL Series 22
BSMP Series 44 GXS Series 22
BSMPL Series 44 GXSL Series 22
C Series 21 HD Series 55
CA Series 8 HDS Series 55
CAB Series 15 Heavy Duty Pedestrian Series 54
Car Series 55, 58-59 Heavy Duty Series 54-56
Carpet-Line Series 28-30 HHA Series 54
CL Series 21 HHAAF Series 54
CLS Series 21 HHS Series 54
Components 6 HHSAF Series 54
Corners 57 Icon Index 5
Cover Plates 65 Inlay Custom 45
CR Series 21 Inlay Joints 26, 30, 42-45, 60
Crossovers Welded 57 K Series 32
CRS Series 21 KD Series 32
CS Series 8 L Series 32
S Series 34
SAA- (FASM 38) Series 11
SAA- (FASM 50) Series 12
SAA- (FASM 64) Series 13
Latham Australia Pty Ltd
71
Quality products engineered
and crafted to meet
tomorrows needs today
WARRANTY POLICY
Latham Australia Pty Ltd warrants to its
purchasers that all products sold by it will STAIR
upon delivery be free from defects in materials
and workmanship. This warranty shall extend NEOPRENE TREAD
for a period of one (1) year following the date EXPANSION LOC & TILE STRIPS NOSINGS
of shipment by us. Any claim in respect of a
defective product must be made in writing
prior to the expiration of the warranty period
and must give particulars of the alleged defect.
Subject to acceptance by us of the claim we
agree to make good such defective product
by repair or replacement (at our option) at our
factory. All other costs whatsoever including
the costs of disassembly and reinstallation and
the cost of transport to and from our factory if
applicable shall be borne by the purchaser.
It is a fundamental condition of sale that all
other warranties of any kind whether statutory
or otherwise and whether express or implied
are hereby excluded and that we accept no
responsibility for consequential loss or damage
of any kind.
PUBLISHERS NOTE:
All sizes in this publication are shown in ENTRY MATS & FRAMES GRATES, GRIDS & FRAMES
millimetres.
The design and other information contained
in this publication have been obtained from
authoritative sources, which are believed to be
LATH 3512-0110 Design & Production www.visualcommunications.com.au