Beruflich Dokumente
Kultur Dokumente
Product Features
WCH hangers allow vertical level adjustment of 20 to
150mm (based on hanger size) after pipe installation.
This helps in effective leveling of piping systems.
Besides the table below, we offer intermediate sizes
designed to closely fit the effective pipe 00 for any
insulation thickness. This enhances installation quality
by avoiding usage of oversize hangers.
Available EPDM lined - to prevent contact between
dissimilar materials (if used with non-ferrous pipe),
minimise condensation and provide noise attenuation.
Lining has a temperature range of -20C to 110C.
Material: Steel
Finish: Electrogalvanised post manufacture
Options: EPOM Lined (suffix 'R')
Epoxy Powder Coated finish (suffix 'P')
Hot Dip Galvanised finish (suffix 'HOG')
c@us : -e-,<-:- - - rB~S6i~~~~~ ROD
YOKE
~....
www.weicco.com WCH 1A0513
MOODY .
Product specifications are subject to change Without pDor nOtlce
INTERNATIONAL
ISO 9001 :2008
Adjustable swivel ring type steel band hangers suitable for suspension of all types of stationary pipes. Most
commonly used for sprinkler system pipelines. Supplied complete with swivel nut.
Product Features
Knurled swivel nut facilitates easy installation ~~-- Threaded Rod (by others)
and vertical adjustment of pipe level post
installation.
Lips are dimpled at bends for models WPCS 48
and above, for added strength.
Swivel nuts are countersunk to prevent burring
or damage to threads.
Also available with EPDM Lining which:
- eliminates contact between dissimilar materials
when clamps are used with non-ferrous pipe
- provides acoustic attenuation by minimizing
transmission of high frequencies from piping to
building structure
- acts as a thermal barrier
- has a temperature range of -20C to 11 DoC
Material: Steel
Finish: Electrogalvanised post manufacture
Standard Sprinkler EPDM lined Sprinkler
Options: EPOM Lined (suffix 'R')
Pipe Hanger (WPCS) Pipe Hanger (WPCS.R)
Epoxy Powder Coated finish (suffix 'P')
Hot Dip Galvanised finish (suffix 'HOG')
Stainless Steel construction (suffix 'SS')
c@us
Underwriters Laboratories listed for sizes %" to 8".
Compliance - US Standards MSS-SP58 (Type 10),
MSS-SP69; EG to ASTM 8633 SC3, 8S1706 FE/ZN12
~
www.weicco.com WPCS 1A3013
MOODY
Product speoficarions are subject to change WIthout pnor notice. <-'N_TERNA_TIO_NAL
_ _- , ISO 9001 :2008
Heavy duty U-Bolts designed to grip, guide or support plain and insulated pipes.
Product Features
Supplied complete with four nuts.
Besides models listed in the table below, a full range
of intermediate sizes is available to match the ODs
of WEICCO RSI, providing a simple and effective
support solution for insulated pipe.
WEICCO U-Bolts are available with EPDM sleeve,
to prevent contact between dissimilar materials when
used with copper, plastic, aluminum or glass pipe.
Application for suspension of
Material: Steel horizontal insulated pipe
Selection I Ordering
I[--
Intermediate U-Bolt models are available, suitable
for any insulated pipe 00. Please specify effective
C ~--A--:r,
D
pipe 00 or pipe size plus insulation thickness.
Application as grip for Application as guide for
Where WEICCO Rubber Support Inserts (RSI) are horizontal insulated pipe vertical insulated pipe
-
SELECTION TABLE FOR U-BOLTS
Model Steel Pipe Dimensions (mm) Max Suspended
Nominal A H D TL (Thread Length) Load (Kg)
us 22 %" 29 42 6 25 200
US 28 7~t 35 48 6 25 200
US 35 1" 42 54 6 25 200
US 42 1y." 49 62 6 25 20Q
US 48 1Y," 58 75 8 35 450
US 60 2" 70 87 8 35 450
US 75 2Y," 86 103 8 35 450
US90 3" 102 122 10 45 700
US 115 4" 127 148 10 45 700
US 142 5" 156 180 12 50 1050
US 167 6" 182 205 12 50 1050
US219 8" 234 260 12 50 1050
US 273 10" 291 324 16 70 2000
US 323 12" 342 375 16 70 2000
US 356 14" 374 407 16 70 2000
US 406 16" 425 458 16 70 2000
US 456 18" 479 522 20 85 3000
US 508 20" 532 573 20 85 3000
US 559 22" 583 624 20 85 3000
US 610 24" 634 675 20 85 3000
US 660 26" 688 738 24 100 4500
US 710 28" 740 789 24 100 4500
US 762 30" 791 840 24 100 4500
US 915 36" 944 995 24 100 4500
~I
Stockist: US 1C6512
I
MOODY
Producr specifications are subJect to change \\ ithout pnor notice
INTERNATIONAL gl'
ISO 9001 :2008
Ductile iron C-c1amp designed for providing attachment of threaded rod to steel beams or purlins, without the
need for drilling or welding. WEICCO WBC is suitable for installation at both upper and lower flanges of beams.
Product Features
Suitable for use with I-beams, channels, angles or
steel roof purlins with up to 22mm flange thickness.
Suitable for threaded rod sizes from 1Omm to 24mm.
Convenient means of suspending pipelines, ducting,
false ceilings or equipment from structural members,
without the need for drilling or welding.
Permit vertical level adjustment post installation.
WBC clamps are denoted as 'universal' on account of
their versatile design, which provides a single product
solution for various application situations.
a) They can be attached to either the upper or lower
horizontal flanges of beams.
b) The threaded suspension rod may either be fixed
offset from the edge of the flange or directly under
and inline with the set screw.
The deep throat design of WBC clamps helps ensure Retaining Strap
an effective grip on the beam flange. BCRS Retaining Strap, available as an optional
Supplied complete with hardened set screw, lock-nut. extra, provides additional installation safety by
preventing horizontal slippage of the clamp.
WBC are suitable for applications requiring seismic
restraint when used along with BCRS retaining straps. May be ordered by specifying strap model and
length required. The length selected should be
appx. 120mm more than width of beam flange.
Material: Ductile Iron
Finish: Electrogalvanised
Set screw
Material: Steel
Finish: Electrogalvanised post manufacture
Retaining Strap
(optional)
Compliance - US Standard MSSSP127;
EG to ASTM 8633 SC3, 8S1706 FE/ZN12
Retaining Strap
(optional)
Model Max. Rod Standard
Size Lengths (mm)
BCRS 1 M12 250,350,450
BCRS2 M20 250,350,450
BCRS3 M24 250,350,450
Typical Application
~
Stockist: WBC 1J0509
MOODY
Product specifications are subject to change without paOt notice L-'NTERNA
__ nClNAL
_ _----' ISO 9001 :2000