Sie sind auf Seite 1von 1

347946811.

xls

Pressure Vessel Calculations - Instrument & Control Air Vessel


Cylindrical Shells References
ASME Section VIII, UG-27, page 24 12-Mar-17 Shell/Rein. Material A-515-70 UG-37, pg-47
Nozzle Material A-106/53-B App. L, pg-541
P 10 bar 1,013,250 Thin 40,184,458 146.92 psi Stress Chk. 21,654 psi Safe
12 bar 1,215,900test pressure 176.30 psi
146.92 psi design max. allowable working pressure psi
REINFORCEMENT CHECK FOR NOZZLE AND MANHOLE
R 42 in shell inner radius Nozzle/Manhole dia. 24.00 in 21.3 mm t 0.280 in w/o C
C 0.12 in corrosion allowance Nozzle innner dia. 22.75 in tn 0.625 in
ts 0.4 in shell thickness Nozzle - thickness - tn 0.625 in 3.73 mm tr 0.365 in
L 20 ft Length Wall thickness reqd. trn 0.099 in
E 0.85 joint efficiency Shell tr 0.365 in te 0.000 in 0 mm
S 20000 psi max allowable stress, but taking as design stress nozzle trn 0.099 in C 0.120 in
S - nozzle 20000 psi Area of Reinforcement Required tweld 0.000 in 0 mm
Circumferential Stress (Longitudinal Joints) A 8.301 in2
Area of Reinforcement Available
w/o C.A. w/ C.A. (basic eq.) A-shell A1 -0.154 in2 -1.9315
t 0.3649 0.3660 0.1543 UG-27, eq 1 -0.1537
P 161 160.6 A-nozzle A2 0.737 in2 0.7367
1.6443 2.276
Longitudinal Stress (Circumferential Joints) A-weld A41 0.078 in2

w/o C.A. w/ C.A. (basic eq.) A-available 0.661 in2 R-Plate required
t 0.1812 0.1817 0.3085 UG-27, eq 2
P 325.1 324.2
Applicable only when R-plate is required
Ellipsoidal Head Parallel Limit 34.00 in
Vertical Limit 34.000 in A2 0.737 in2
h 10.825 in. one-half of the length of minor axis thickness of R-plate - te 0.600 A41 0.000 in2
K 2.842 factor Dp (in) 68 A42 0.000 in2
weld t w/ shell 0.000 in A5 26.400 in2
t eh 1.0326 (1-4c) eq 1, pg 310 weld t w/ nozzle 0.000 in
P 57 A-provided 26.983 in2
R-plate NOT required
t 1.0175 (1-4c) eq 2 pg 311
all dim. in "mm" and "lbs" except where specified

'file:///var/www/apps/conversion/tmp/scratch_6/347946811.xls'#$Sheet1

Das könnte Ihnen auch gefallen