Beruflich Dokumente
Kultur Dokumente
Faculty of Engineering
Syllabus for
B.Sc. Engg in Electrical & Electronic
Engineering
Session 2015-2016
EEE, Session 2015~2016
University of Rajshahi
Faculty of Engineering
Department of Electrical & Electronic Engineering
Syllabus for B.Sc. in Electrical & Electronic Engineering
Session: 2015-2016
Electrical & Electronic Engineering (EEE) encompasses a very wide area of knowledge and is
considered as one of the most important engineering disciplines within the engineering society.
The contributions of EEE are not limited to areas in applications such as power engineering,
telecommunications and computer systems but also extended to instrumentation, manufacturing,
information technology and many more. Electrical & Electronic Engineering is very dynamic
and sensitive to technological advancement in the world. In fact, most of the technological
revolution started from Electrical and Electronics.
Electrical & Electronic engineers are involved in the design and development of modern high
technology applications such as automation for electromechanical systems, computer systems,
embedded systems and electronic control systems applied in process plants, automotive industry,
aerospace, and even maintenance. In other words, Electrical & Electronic engineers are highly
demanded in various fields and its graduates are highly sought after by potential employers.
The courses on Bachelor of Science in Engineering in Electrical & Electronic Engineering (B.Sc
Engg in EEE) programme at University of Rajshahi are designed to emphasize on a strong
foundation in physics, mathematics, and chemistry, followed by a thorough coverage of basic
electrical and electronic engineering courses such as circuit theory, analogue electronics, digital
electronics, microprocessor, as w ell as signal and systems. At higher levels, students are
exposed to data and computer networking, digital signal processing, VLSI system design,
control theory, communication systems, and power electronics so that they are
Able to acquire and apply knowledge of mathematics, basic science and engineering
fundamentals to solve complex electrical and electronics engineering problems.
Able to undertake complex electrical and electronic engineering problem identification,
formulation and solution synthesis using fundamental know ledge, techniques and
analytical skills to reach substantiated conclusions in complex engineering practice.
Able to utilize system or subsystems approach to solve complex electrical and electronic
engineering problem with appropriate consideration for public health and safety, cultural,
societal, and environmental considerations.
Able to investigate and solve complex problems using research know ledge and research
methods including design of experiments, analysis and interpretation of data, and
1
EEE, Session 2015~2016
The courses designed for B.Sc. in Electrical & Electronic Engineering consist of 4000 marks of
160 credits distributed over eight semesters in four academic years. Each academic year is
divided into two semesters (odd & even) each of duration not less than 11 weeks (66 working
days). There shall be final examinations at the end of each semester. The medium of answer in
all examinations will be either Bangla or English, but not the mixer of both. The theoretical
examination of courses less than or equal to 2 credits shall be of 2 hours duration and courses
greater than 2 credits shall be of 3 hours duration. An academic schedule for an academic year
shall be announced for general notification before the start of the academic year, on the prior
approval of the academic committee.
For theoretical courses of less than or equal to 2 credits there shall be at least three class
tests and at least four class tests for greater than 2 credits in a semester. Previous class test
marks will remain valid for the reported/ course improvement student if he/she is unable to
appear at class test.
The letter grade system shall be used to assess the performance of the students as shown in
Table-2 (Ref. AOFE article no-14):
Table-2 Grading System
Marks Letter Grade Grade Point
(LG) (GP)
80% or above A+ 4.0
75% to less than 80% A 3.75
70% to less than 75% A- 3.5
65 to less than 70% B+ 3.25
60% to less than 65% B 3.0
55% to less than 60% B- 2.75
50 to less than 55% C+ 2.5
45% to less than 50% C 2.25
40 to less than 45% D 2.0
less than 40% F 0.0
Incomplete I 0.0
Absence of a candidate in an examination of a course in which he/she ought to have been
present will be considered as if the candidate obtained zero marks (F grade) in that course.
A Grade Point Average (GPA) shall be calculated for each semester as follows:
n
C i Gi
GPA i 1 (i)
n
C i 1
i
3
EEE, Session 2015~2016
where, n is the number of courses offered during the semester, Ci is the number of credits
allotted to a particular course and Gi is the grade point earned for that course.
A Yearly Grade Point Average (YGPA) shall be calculated for each academic year as follows:
2
C j Gj
YGPA
j1 (ii)
2
C j1
j
Where 2 is the number of semesters, Cj is the number of credits allotted to the jth semester and
Gj is the GPA earned for that semester.
The Cumulative Grade Point Average (CGPA) gives the cumulative performance of the
students from the first year up to the end of the year to which it refers, and will be calculated as
follows:
m
C k Gk
CGPA k 1 (iii)
m
C k 1
k
where, m is the total number of years being considered, Ck is the total number of credits
registered during the kth year and Gk is the YGPA earned in that particular year.
A Cumulative Grade Point Average (CGPA) shall be calculated at the end of each academic
year and to be communicated to the students along with the YGPAs. The individual grades of
courses obtained by them for the semesters of the academic year will, however, be
communicated at the end of individual semester by the Chairman of the Examination
Committee.
Both YGPA and CGPA will be rounded up to the second place of decimal for reporting. For
instance, YGPA=2.212 shall be rounded up as YGPA=2.22.
And lets assume that his/her GPA in Part-I Even Semester is = 3.13
20(3.02) 20(3.13)
Therefore, YGPA of Part-I examination is =
20 20
= 3.075 3.08
4
EEE, Session 2015~2016
Similarly assume that, the students YGPA for the other 3 Parts are the followings.
Table-3: Marks and Credits distribution in discipline for B.Sc. in Electrical & Electronic
Engineering
Course Type Marks Marks (%) Credits
a
Humanities 200 5 8
b
Basic Sciences (with Lab) 800 20 32
Engineering 3000 75 120
Total 4000 100 160
Distribution a. Theoretical 2925 73.125 117
b. Board Viva-Voce 150 3.75 6
c. Laboratory 825 20.625 33
d. Project and 100 2.5 4
industrial training
a
Each department must include course on English.
b
Each department must include courses on Physics, Chemistry and Mathematics.
6
EEE, Session 2015~2016
Course
Course Titles Marks Credits
Codes
LAW 2211 Law and Professional Ethics 50 2
MATH2211 Complex variables and statistical analysis 75 3
EEE2211 Computational Methods in Electrical Engineering 75 3
EEE2282 Lab: Computational Methods in Electrical
25 1
Engineering
EEE2231 Introduction to digital system and designs 75 3
EEE2262 Lab: Introduction to digital system and designs 50 2
EEE2221 Electrical Machine -II
75 3
EEE2252 Lab: Electrical Machine II 25 1
EEE2290 Viva voce 50 2
Total 500 20
No. of Theory Courses: 5 Total contact Hrs/week: 23
No. of Lab Courses: 3 Total Credit Hours: 20.00
Part-3 Odd Semester
Course
Course Titles Marks Credits
Codes
EEE3111 Electronic Circuit -II 75 3
EEE3182 Lab: Electronic Circuit -II 25 1
EEE3121 Electrical Machine-III 75 3
EEE3162 Lab: Electrical Machine-III 25 1
EEE3131 Microprocessor and microcomputer system 75 3
EEE3182 Lab: Microprocessor and microcomputer system 25 1
EEE3141 Power transmission and distribution 75 3
EEE3151 Electromagnetic Fields and waves 75 3
EEE3172 Electrical Shop Practice 50 2
Total 500 20
No. of Theory Courses: 5 Total contact Hrs/week: 23
No. of Lab Courses: 3 Total Credit Hours: 19.00
Part-3 Even Semester
Course
Course Titles Marks Credits
Codes
EEE3211 Control System 75 3
EEE3262 Lab: Control System 25 1
EEE3221 Industrial Electronics 75 3
EEE3272 Lab: Industrial Electronics 25 1
EEE 3231 Measurement and Instrumentation 75 3
EEE3282 Lab: Measurement and Instrumentation 50 2
EEE3241 Electronic circuit for communication system 75 3
EEE3251 Project Planning , Management and Engineering 50 2
EEE3290 Viva-voce 50 2
Total 500 20
No. of Theory Courses: 5 Total contact Hrs/week: 23
No. of Lab Courses: 4 Total Credit Hours: 19.00
7
EEE, Session 2015~2016
Course
Course Titles Marks Credits
Codes
EEE4111 Power system 75 3
EEE4162 Lab: Power system 50 2
EEE4121 Communication Engineering 75 3
EEE4172 Lab: Communication Engineering 50 2
EEE4131 Digital Signal Processing 75 3
EEE4141 VLSI design 75 3
EEE4182 Lab: Advanced Computer Programming 50 2
EEE4191 Project 50 2
Total 500 20
No. of Theory Courses: 4 Total contact Hrs/week: 28
No. of Lab Courses: 4 Total Credit Hours: 20.00
Part-4 Even Semester
Course
Course Titles Marks Credits
Codes
EEE4211 Power Station 75 3
EEE4221 Power system protection and switch gear 75 3
EEE4272 Lab: Power system protection and switch gear 25 1
EEE4231 Microwave devices 75 3
EEE4282 Lab: Microwave devices 25 1
EEE4280 Seminar 50 2
EEE4251 Optional-II
a) Computer methods in power system analysis
75 3
b) Digital circuit design
c)Optical fiber communication
EEE4290 Viva-voce 50 2
EEE4292 Industrial training 50 2
Total 500 20
No. of Theory Courses:4 Total contact Hrs/week: 26
No. of Lab Courses: 4 Total Credit Hours: 21.00
improve the grades on the courses in which less than B grade (including those of F grade)
was obtained in Part-I, Part-II and Part-III examinations. In such case, the student has to give
his/her choice of course/courses for course improvement in writing. If the student fails to
clear his/her F grades in the first attempt, he/she shall get another (last) chance in the
immediate next year to clear the F grades. In the case of students failure to improve his/her
course grade at the course improvement examination, the previous grade shall remain valid.
8.5 Course Exemption: Students who fail to be promoted to the next higher class shall be
exempted from taking the theoretical and laboratory courses where they obtained grades
equal to B or above. These grades would be counted in calculating GPA in the next years
examination results.
8.6 Merit Position: The YGPA obtained by a student in the semester final examinations will
be considered for determining the merit position for the award of scholarships, stipends
etc.
9. Publication of Results (Ref. AOFE article no- 17):
9.1 Award of degree: In order to qualify for the B.Sc. Engg. degree, a student must have to earn
minimum 150 credits and a minimum CGPA of 2.25 within a maximum of six academic
years. The result will be published in accordance with merit.
9.2 Honours: Candidates for Bachelor degree in engineering will be awarded the degree with
Honours if their earned credit is 160 and CGPA is 3.75 or higher.
9.3 Result Improvement: A candidate obtaining B.Sc. Engg. within 4 or 5 academic years shall
be allowed to improve his/her result, of maximum of 10 credit points (courses less than B
grade) of the Part-IV theoretical courses in the immediate next regular examination after
publication of his/her result. No improvement shall be allowed for laboratory examinations
and Board Viva-voce. If a candidate fails to improve CGPA with the block of new GP in
total, the previous results shall remain valid.
9.4 Readmission and Course Exemption: If a student fails to obtain the degree within 4 or 5
academic year, he/she will be readmitted in Part-IV and will appear for the exam according
to the clause 15.6. Course exemption rules will also be valid according to clause 15.7.
9.5 Deans List: As a recognition of excellent performance, the names of students obtaining a
cumulative GPA of 3.75 or above in two regular semesters in each academic year may be
published in the Deans List in the faculty. Students who have received an F grade in any
course during any of the two regular semesters will not be considered for Deans List in that
year.
9.6 Recording of Result: The transcripts in English will show the course designation, course
title, credit, letter grade, grade point of individual courses, YGPA of each year, and finally,
CGPA.
9
EEE, Session 2015~2016
Section-A
1. Grammar: Grammatical principles, modals, phrases & idioms, prefixes & suffixes,
sentence structures, wh & yes/ no questions, conditional sentences.
2. Vocabulary: Technical & scientific vocabulary, defining terms.
3. Spoken English: Introduction to phonetic symbols, dialogue, responding to particular
situations, extempore speech.
Section-B
1. Reading: Comprehension of technical & non-technical materials-skimming, scanning,
inferring & responding to context.
2. Technical Writing: Paragraph & composition writing on scientific & other themes, report
writing, research paper writing, library references.
3. Professional communication: Business commercial correspondence letter, job application,
memos, quotations, tender notice, amplification, description, technical report writing,
standard forms of term papers, thesis etc.
Books Recommended:
1. John M. Lennon : Technical Writing
2.A.J. Thomson and A.V. Martinet : A Practical English Grammar
3. A. Ashley : Oxford Handbook of Commercial Correspondence
4. J. Swales : Writing Scientific English
5. Robert J. Dixson : Complete Course in English
6. Rajendra Pal & J. S. Korlahalli : Essentials of Business Communications.
Section-A
1. Algebra of sets, De Morgan's rule, Relation & Function. Determinants: Properties and
Cramer's rule.
2. Theory of Equations: Theorem, and relation between roots and coefficients. Solution of cubic
equations.
3. De Moivre's theorem. Deduction from De Moivre's theorem.
Section-B
4. Functions of complex arguments. Gregory's series. Summation of series. Hyperbolic functions.
5. Vector Addition, Multiplication & Differentiation.
6. a. Definitions of line, Surface and Volume Integral, Gradient of Scalar Function, Divergence
and Curl of Vector function.
10
EEE, Session 2015~2016
Reference Books:
1. Barnside and Panton :Theory of Equations
2. Barnside and Child : Higher Algebra
3. M. A. Sattar : Higher Trigonometry
4. M. A. Sattar : Vector Analysis
Section-A
1 Electrochemistry to EEE 1111 (10 Lectures): Conductors, Electrolytes and Electrolysis;
Faradays Laws of Electrolysis and their significance. Ohms law and electrolytic conductances;
Theories for electrolytic conductance ( Arrhenius & Debye-Hkel). SHOULD MOVE TO
EEE1111 Ionic mobility, Kohlrauschs law, Tranference Number and its determination;
Activities, activity coefficient and Debye-Hkel limiting law. Electrochemical cells(Electrolytic
and Galvanic/Voltaic):Electrode reaction and potentials. Reference electrodes; Reversible and
concentration cells,Storage Batteries(or accumulators). CHA
2 Chemical Equilibrium and Kinetics (10 lectures): Equilibrium and Equilibrium constants,
Kc, Kp, Kx. Rate of reaction and rate constants; Le Chatelier principle and its application.
Order and molecularity of a reaction; integrated rate expressions & half- lives of zeroeth, first
and second order reactions. Determination of order & temperature dependence of a reaction;
energy of activation and Arrhenius equation. Transition-state theory of reaction rates.
Characteristics of catalysis, promoters and inhibitors.
3 Surface Chemistry and Colloids (10 lectures): Adsorption and sorption; Characteristics of
physical and chemical adsorptions. Fruendlich, Langmuir and Gibbs Adsorption isotherms;
The BET equation. Crystalloids, Colloids and their classification, preparation, properties
(kinetic, colligative, optical & electrical) and importance,=. Original pf charge and stability of
colloids (sols), Gold number; colloidal electrolytes. Elementary idea about emulsions and gels.
Section-B
1. Atomic structure and Periodic Table (10 lectures): Modern concept of atomic structure and
Periodic Table; related principles and Laws. Constitution and Periodic properties of elements
(ionization potential, electronigativety, electron affinity, atomic and ionic radii). Grouping of
elements, their properties and uses. Isotopes and radioactivity.
2. Electronic Theory of Valency and Chemical Bonding (8 lectures): Different types of bonds
(ionic, covalent, co-ordinate, hydrogen and metallic) Classification of solids on the basis of
bonding and their properties. Atomic orbitals and their hybridization; valency bond and
Molecular orbital theories.
11
EEE, Session 2015~2016
Text Books:
1. R. D. Madan : Modern Inorganic Chemistry
2. M.M. Haque and M.A. Nawab : Principles of Physical Chemistry
3. E.S Gilreath : Fundamental Concepts in Inorganic Chemistry.
Reference Books:
1. G.M. Barrow : Physical Chemistry
2. W.J.Moore : Physical Chemistry
3. K.J. Laidler and J.H. Meiser : Physical Chemistry
4. S.R. Palit : Elementary Physical Chemistry
5. S. Z. Haider : Modern Inorganic Chemistry
6. Companion : Chemical Bonding
7. Cotton, Wilkinson & Jones : Basic Inorganic Chemistry
8. D. K. Sebera : Electronic Structure and Chemical Bonding
Fundamental concepts and units variables and parameters: Voltage, current, power, energy,
independent and dependent sources, resistance.
Basic laws: Ohms law, Kirchhoffs current and voltage laws, Joules law.
Simple resistive circuits: Series and parallel circuits, voltage and current division, Wye-Delta
transformation.
Techniques of circuit analysis: Nodal and mesh analysis including supernode and supermesh.
Network theorems: Source transformation, Thevenins, Nortons and superposition theorems
with applications in circuits having independent and dependent sources, Millmans theorem,
Compensation theorem, Maximum power transfer theorem and Reciprocity theorem.
Source Concept: Sources of E.M.F, primary and secondary cells. Energy storage elements:
Inductors and capacitors, series & parallel combination of inductors and capacitors.
Magnetic quantities and variables: Flux, permeability and reluctance, magnetic field strength,
magnetic potential, flux density, magnetization curve. Laws of magnetic circuits: Ohms law and
Amperes circuital law. Magnetic circuits: series, parallel and series-parallel circuits.
Introduction to measuring instruments: Ammeter, voltmeter, galvanometer and wattmeter.
Text:
1. Robert L. Boylestad: Introductory Circuit Analysis
2. Charles K. Alexander & Mathew N. O. Sadiku: Fundamentals of Electric Circuits
Reference Book:
Introduction to Electric Circuits: R. C. Dorf and J. A. Svoboda
12
EEE, Session 2015~2016
ARRAYS AND STRINGS: Arrays, Initialization, Declaration, One dimensional and Two
dimensional arrays. String, String operations, String Arrays. Simple programs, sorting, searching
, matrix operations.
STRUCTURES AND UNIONS: Introduction, need for structure data type, structure definition,
Structure declaration, Structure within a structure, Union, Programs using structures and Unions
Storage classes, Pre-processor directives.
Text:
1. Anita Goel and Ajay Mittal: Computer Fundamentals and Programming in C
2. Pradip Dey, Manas Ghosh: Fundamentals of Computing and Programming in C
Reference Book:
1. Byron S Gottfried: Pogramming with C, Schaums Outlines
1. Introduction to orthographic projections: Scale drawing, Sectional view, Top and Side
view Isometric views. Missing line, Auxiliary view, Pictorial views.
2. Drawing standards and practices: Interpenetrating of surfaces, Development of surfaces,
Machine drawings, Technical sketching.
13
EEE, Session 2015~2016
Section-A
1. Basic Concepts of Economics: Definition and subject matter of Economics;
Microeconomics vs macroeconomics; Law of Economics; Central economic problems of
every society; Different economic systems; Economics and Engineering.
2. Theory of Demand, Supply and Consumer Behavior: Law of Demand; Demand schedule
and demand curve; Supply law, supply schedule and supply curve; Shift in demand and
supply; Equilibrium in the market; Elasticity of demand and supply; Marshallian utility
analysis; Total and marginal utility; Law of diminishing marginal utility; Law of equi-
marginal utility.
4. Theory of the Firm: Perfect competition and monopoly; Total, average and marginal
revenue of a firm; Average and marginal revenue under perfect competition and monopoly;
Firms Equilibrium; Equilibrium of firm under perfect competition and monopoly.
Section-B
5. Linear Programming and Input-Output Analysis: Meaning of linear programming; Its
components; duality of a problem in linear programming; graphical, feasible and optimal
solutions; The simplex method; Meaning of input-output analysis; Input-output analysis
model; balance equation; coefficient matrix; Determination of final demand vector.
8. Development Planning in Bangladesh: Need for planning in Bangladesh; Various five year
plans in Bangladesh; Development strategies in the five year plans of Bangladesh.
Books Recommended.
14
EEE, Session 2015~2016
Section-A
1. Functions: Domain, Range, Inverse function and graphs of functions, Limits, Continuity,
Indeterminate form.
2. Ordinary Differentiation: Differentiability, Differentiation, Successive differentiation and
Leibnitz theorem.
3. a. Expansions of functions: Rolle's theorem, Mean value theorem, Taylor's and Maclaurin's
formulae.
b. Maximum and minimum of functions of one variable.
4. a. Partial Differentiation: Euler's theorem, Tangents and normal.
b. Asymptotes.
Section-B
5. Indefinite Integrals: Method of substitution, Integration by parts, Special trigonometric
functions and rational fractions.
6. Definite Integrals: Fundamental theorem, General properties, Evaluations of definite integrals
and reduction formulas.
7. Multiple Integrals: Determination of lengths, Areas and Volumes.
Books Recommended.
Text:
1. B.C. Das and B.N.Mukherjee : Differential Calculus
2. B.C.Das and B.N. Mukherjee : Integral Calculus
Reference Books:
1. F. Ayres : Calculus
2. Joseph Edwards : Differential Calculus
3. Benjamin Williamson : Integral Calculus
4. Muhammad and Bhattacherjee : Differential Calculus
5. Muhammad and Bhattacherjee : Integral Calculus
Section-A
Fourier analysis: Fourier series, Fourier coefficients, even and odd functions, properties of
Fourier series, Convergence of Fourier series, extension of internal Fourier series, Fourier
integral, sine and cosine integrals, finite Fourier transformation, series, infinite Fourier
transformation, use of Fourier transformation in boundary value problems.
Section-B
Laplace transform: Laplace transforms of elementary functions, properties of Laplace
transform, inverse Laplace transform and its properties, convolution theorem, application of
15
EEE, Session 2015~2016
Laplace transform to solve differential equations related linear circuit and partial deferential
equations.
Text Book:
1. H. A. Anton and C. Rorres : Elementary Linear Algebra
2. M. R. Spiegel : Schaum's Outline of Laplace Transform
STAT 1211 Statistics for Engineers
50 Marks [70% Exam, 20% Quizzes/Class Tests, 10% Attendance]
0.5 Unit, 2 credits, 3 periods/week, Lectures: 33, Exam. Time: 2 hours
Section-A
1. Analysis of statistical data: Location, Dispersion and their measures, Skewness, Kurtosis and
their measures, Moment and Cumulants and Practical examples.
2. Probability: Concept of probability, Sample Space, Events union and Intersection of Events.
Probability of events, Loss of probability, Conditional probabilities. Bays Theorem,
Chebysecs Inequality and Practical examples.
3. Random variables and probability Distribution: Basic concepts, Discrete and continuous
random variables, Density and distributional functions, Mathematical expectation and
variance, Joint marginal and conditional density functions. Conditional Expectation and
conditional variance. Moments and Cumulant generating functions. Characteristic function.
Study of Binomial Poisson, Normal and Bivariate Normal distribution and Practical
examples.
Section-B
4. Linear Regression: Correlation, Rank correlation. Partial and Multiple correlations Linear
Regression for two Variables, Principle of Least Squares Method, Lines of best fit, Residual
Analysis and examples.
5. Test of Significance: Basic ideas of Null hypothesis, Alternative hypothesis, Type-I error
Type-II error level of significance Degree of freedom, Rejection region and Acceptance region.
Test of Single mean, Single variance, Two sample means and Variances. Test for 22
contingency tables, Independence test and practical examples. application in quality control,
failure pattern, depreciation calculation.
Text:
1. P.G.Hoel. : Introductory Statistics
2. S.G. Gupta : Fundamentals of Statistics
Reference Books:
1. A. J. B. Anderson. : Interpreting Data.
2. H. Cramer : The Elements of Probability Theory.
3. D. V. Lindley : Introduction to Probability and Statistics
4. S. Lipschutz. : Probability
PHY1211: Physics
75 Marks [70% Exam, 20% Quizzes/Class Tests, 10% Attendance]
0.75Unit, 3 credits, 5 periods/week, Lectures: 55, Exam. Time: 3 hours
Electricity and Magnetism: Electric charge and Coulombs law, Electric field, concept of
electric flux and the Gausss law- some applications of Gausss law, Gausss law in vector form,
Electric potential, relation between electric field and electric potential, capacitance and
dielectrics, gradient, Laplaces and Poissons equations, Current, Current density, resistivity, the
magnetic field, Amperes law, Biot-Savart law and their applications, Laws of electromagnetic
induction- Maxwells equation.
16
EEE, Session 2015~2016
Waves: Periodic Motion, Simple Harmonic Oscillation, Types of waves, Equation of Waves,
Velocity and Energy, Complex waves, Standing waves, Resonance and Beats, Sound waves,
Doppler Effect.
Fundamentals of Light: Basic properties and theories of light, Electromagnetic Spectrum and
Visible Range, Refractive index, Optical Path, Dispersion, Wave theory and Huygens principle,
Photoelectric effect, Quantam theory of light, Wave-particle duality, Photons.
Interference: Interference phenomena, Youngs double slit experiment, Displacement of fringes
and its uses, Fresnel bi-prism, Interference in thin films, Newtons rings, Interferometers.
Diffraction: Fresnel and Fraunhoffer Diffraction, Diffraction by single slit, Diffraction from a
circular aperture, Resolving power of optical instruments, Diffraction at double slit and N-slits,
Diffraction grating
Polarization: Production and analysis of polarized light, Brewsters law, Malus law,
Polarization by reflection and refraction, Nicol prism, Optical activity, Polarimeters.
Text:
David Halliday & Robert Resnick: Physics Part I & Part II.
Reference Books:
A. Beiser: Concept of Modern Physics
Francis A. Jenkins & Harvey E. White: Textbook of Optics
Brij Lal: A Textbook of Optics
17
EEE, Session 2015~2016
18
EEE, Session 2015~2016
Section-A
1. Industry: Types of Industry, Commerce Hindrance removed by Commerce, Business
Environment.
2. Sole Proprietorships: Features, Advantages, Disadvantages of Sole Proprietorship,
Sustainability of Sole proprietorships.
3. Partnership: Features, Advantages, Disadvantages, the Partnership Contract.
4. Joint Stock Company: Characteristics, Advantages, Disadvantages, Types, Comparison
between Public and Private Ltd Company and Formation of company.
5. Fundamentals of Management: What is management? Management Function, Levels of
Management, Management roles, Core Management skills, Principles of Management.
6. Organizing the Business: Formal and Informal Organization, Centralisation and
Decentralization, Principles of Organizing, Functional Structure, Product Structure,
Terrestrial Structure, Matrix Structure, Multiple Structure.
Section-B
7. Accountings: History, Scope and Nature of Accounting, Information and Uses
8. Transaction: Meaning and Features, Double entry System, Characteristics, Account
Meaning, Classification, Rules for Determining Debit and Credit, Accounting. Equation,
Accounting cycle.
9. Journal: Meaning, Features, Necessity, Types, Practical Problems.
10. Ledger: Definition, Advantages, Classification, Rules, Practical Problems.
11. Cash book: Features, Advantages, Double and Triple Column Cash Book, Discount.
12. Trial Balance: Meaning, Characteristics, Objects, Practical problems,Preparation of
Financial Statements.
Text:
1. M. C. Shukla : Business organization and management
2. Harold Koontz and Heinz Weihrich : Management
3. Weygandt, Kimmel and Kieso : Accounting Principles
4. Basu and Das : Practice in Accountancy
Reference Books:
1. Khan and Arif : Essential of Business Organization and Management
2. May and Baker : Introduction to Business
3. W. H. Newman : Administrative Action
4. Ricky W. Griffin : Management
5. Hermanson and Associates : Accounting Principles
6. Acquilano, Chase and Davis : Fundamental of Operations Management
19
EEE, Session 2015~2016
Section-A
1. Algebra of Matrices: Adjoint, Inverse and rank of matrix-definition, Properties and
evaluation.
2. Elementary Transformations: Echelon: Canonical and normal forms, Solution of system
of linear equations, Consistency and solution of homogeneous and nonhomogeneous systems
by matrix method, and reduction to equivalent system.
3. Characteristic Equation: Eigenvalues, Eigenvectors and Caley-Hamilton theorem, Similar
matrices and diagonalization.
Section-B
4. Solutions of first order and first degree and first-order and higher degree equations with variable
coefficients.
5. Solution of Higher-Order linear differential equations.
6. Differential Equations: Series solution of linear differential equation, Series solution of second
order equation with variable coefficients, Solutions of partial differential equation, Lap laces
equation, Poisson's equation, Helmholtz's equation, Diffusion equation, Green's function
solution, Integral equation.
Books Recommended.
Text Books:
1. M. L. Khanna : Matrices
2 .S. L. Ross : Introduction of Ordinary Differential Equations
Reference Books:
1 F. Ayres : Theory and problems of Matrices.
2. Moduffe : Theory of Matrices
3. F. Ayres : Differential Equations
4. B. D. Sharma : Differential Equations
5. L. Pipes : Applied Mathematics For Engineers and Physicist
6. I. S. Sokolnikoff & R. M. Redheffer : Mathematics For Physics and Modern Physics
Section- A
Introduction to Semiconductor: History of vacuum tube and modern electronics, Intrinsic and
Extrinsic semiconductors, N and P type semiconductors; Mobility; Drift Velocity, Energy bands.
Semiconductor Diode: PN junction diodes and their I-V characteristics; Zener diode; Tunnel
diode; Varactor diode; Photodiode and LDR; Transition & Diffusion capacitance.
Diode Circuits: Ideal rectifier concept; Half wave and Full wave rectifiers; Filters; Voltage
regulators; Voltage doubler; Clippers and Clampers.
20
EEE, Session 2015~2016
Section-B
Bipolar Junction Transistors: PNP and NPN type, Transistor V-I characteristics, CE, CB, and CC
configurations, Transistor action, Transistor as an amplifier, Operating point, Load line.
Small Signal Amplifier: Low frequency amplifiers, Transistor equivalent circuits, Hybrid
parameters, Analysis of CE, CB and CC amplifiers using h-parameters.
FET & MOSFET: Construction and classification, Principle of operation, Characteristic curves,
Channel conductivity, Parameters of the FET, Effect of temperature on FET, Common source
amplifier, Common drain amplifier, MOSFET.
Text:
J. Millman and C.C. Halkias: Electronic Devices and Circuits
Reference Book:
Robert Boylestad: Electronic Devices and Circuit Theory
B.L.Theraja: A Textbook of Electrical Technology Vol. IV
Gupta and Kumar: Handbook of Electronics
D.C. Generator: Principles, Construction, Classification, Armature windings, Voltage build up,
Armature reactions and Commutation, Performance and testing, Compounding of d.c. generator,
Generator characteristics, Voltage regulation, Losses and efficiency, Parallel operation.
D.C. Motor: Operation, Types, Back e.m.f, Torque equations, Motor characteristics, Speed-
Torque Characteristics, Speed regulation, Losses and efficiency, Methods of speed control,
Methods of braking, Starters, Amplidyne and Metadyne.
Single Phase Transformer: Principles, Types, Equivalent circuits, Performance and testing,
Regulation, Losses and efficiency, Parallel operation, Auto-transformer, Instrument
transformers.
Poly Phase Transformer: Poly phase transformer construction, Poly phase transformer
connections, Harmonics in polyphase transformer, transformer cooling.
Text Book:
Electric Machinery: A Fitzgerald
Reference Book:
Schaum's Outline of Electric Machines & Electromechanics: Syed A. Nasar
21
EEE, Session 2015~2016
Study of fuels. Steam generation units with accessories and mountings. Study of steam
generation and steam turbines. Introduction to internal combustion engines and their cycles.
Study of SI and CI engines and gas turbines with their accessories.
Refrigeration and air conditioning with their application. Refrigeration equipment: compressors,
condensers and evaporators.
Type of fluid machinery, Study of impulse and reaction turbine. Pelton wheel and Kalpan
turbine. Study of centrifugal and axial flow machines. Pumps, fans, blowers and compressors.
Study of reciprocation pumps.
Section-A
Law: Principle of law of contract, agency, partnership, sale of goods negotiable instruments,
insurance-
Company law: The companies act with special reference to the amendments and ordinances
applicable to Bangladesh. Law regarding formation, Incorporation, Management and winding up
of companies.
Labor Law: The scope and sources of labor law. Law in relation to wages, hours, health, safety
and other condition to work. The legislation effecting employment in factories. The trade union
legislation arbitration, the policy of the state in relation to labor. Elementary principle of labor
law. Cyber law, Industrial law etc.
Section-B
and to other engineers. Measures to be taken in order to improve the quality of engineering
profession.
Ethical Expectations: Employers and Employees inter-professional relationship, maintaining a
commitment of Ethical standards. Desired characteristics of a professional code.
Institutionalization of Ethical conduct cyber law moral thoughts.
Text:
1. A. K. Sen: A Hand Book of Commercial Law.
2. A. B.Siddique: The Law of Contract.
3. A. A. Khan: Labour and Industrial Law.
4. Emile Durkheim:Professional Ethics and Civics Morals.
5. J. D. Mabboth: An Introduction to Ethics.
Reference:
1. A. G. Maitra: Laws of Contract.
2. Coopers: Outline of Industrial Law.
3. A. Zulfiquar: A Text Book on the Bangladesh Labour Act-2006.
4. P. Narayanan: Intellectual Property Law.
5. The Patent and Design Act, 1911.
6. A. R. Khan: Business Ethics.
7. M. Radar: Ethics and the Auman Community.
8. G. E. Moore: Principia Ethicia.
23
EEE, Session 2015~2016
Text Book:
Digital Fundamentals: Thomas L. Floyd
Reference Book:
Electronic Principles: Albert Malvino
24
EEE, Session 2015~2016
25
EEE, Session 2015~2016
Amplifier Fundamentals: current gain, voltage gain, power gain, input impedance, output
impedance, and classification of amplifiers, Distortion in amplifiers.
Feedback: Concept of feedback, Negative feedback, Positive feedback, Voltage feedback, Current
feedback, Effect of feedback on impedance, Gain, Bandwidth, Distortion & Stabilization.
Operational Amplifier: Difference amplifier, CMMR, Ideal operational amplifier, Inverting
amplifier, Non-inverting amplifier, General purpose IC operational amplifier, Integrator,
Differentiator, Linear and non-linear applications of operational amplifier, Comparator and
Converter.
Oscillators: Positive feedback, Condition of oscillation, RC phase shift oscillator, Wein bridge
oscillator, Resonant circuit oscillators, Crystal oscillator and Waveform generators.
Multivibrators: Introduction to the multivibrator, Biastable multivibrator, Monostable multivibrator,
Astable and other forms of multivibrator, Uses of multivibrator.
Text Book:
1. Robert Boylestad: Electronic Devices and Circuit theory.
Reference Book:
1. Robert F. Coughlin: Operational Amplifier and Linear Integrated Circuits
2. Allen Mottershead: Electronic Devices and Circuits
3. David A. Bell: Electronic Devices and Circuits
Text:
A Fitzgerald: Electric Machinery
Reference Book:
Syed A. Nasar: Schaum's Outline of Electric Machines & Electromechanics
Insulated cable: Insulating materials, Electric stress grading of single phase and three phase
cable. Dielectric losses and heating. Modern development, testing of insulated cables. Corona
power loss. Kelvins law. Economic conductor section, limitation and selection of ideal voltage.
Introductory Concepts: Open loop versus closed loop feedback system. Input output
relationship.
Transfer function. DC machine dynamics, performance criteria, sensitivity and accuracy.
Analysis of control systems time and frequency domain error constants.
Stability of control system: Routh-Harwith criterion, bode plot. Nyquist method. Root locus
techniques. Frequency response analysis. Nicholes chart, compensation. Introduction to non-
liner control system. State variable characterization of system, transition matrix, canonical
forms. Controllability and observability.
Text:
1. Norman S. Nise: Control Systems Engineering
2. I.J. Nagrath: Control Systems Engineering
Introduction to power switching devices and their terminal characteristics. Snubber circuits.
Single and three phase line frequency diode rectifiers and line frequency phase controlled
rectifiers. Thyristor circuit and its control with commutation techniques. Cycloconverters, dc-dc
switch mode converters, UPS, DC choppers: classification. Step up, step down choppers. Single
phase PWM inverters. Introduction to three phase inverters. Voltage controlled inverters.
Advanced modulation techniques. Introduction to induction, dielectric and microwave heating.
Text:
1. Muhammad H. Rashid: Power Electronics
2. Mohan, Undeland and Robbins: Power Electronics
3. P C Sen: Power Electronics
28
EEE, Session 2015~2016
Text:
1. Louis Frenzel: Communication Electronics
2. Krauss: Solid State Radio Engineering
30
EEE, Session 2015~2016
Representation of power system, single line diagrams, imortance and reatance diagrams, per unit
system of calculations. Reactance of synchornous generaotrs and its equivalent circuits.
Symmetrical fault calculations Limitation of short circuit current using reactors.
Symmetrical components; positive, Negative, and Zero sequence network of genetators,
transformers and lines Unsymmetrical fault calculation.
Power and reactive power flow calculations of simple system. Lead flow studies large system.
Control of voltage, power and reactive power.
Power system stability: Dynamic equation of rotating machines. Swing equation and solution of
sowing equation. Steady state and stability limit of a two machine problem, equal area criterion.
Methods of improving stability.
Text:
1. V.K. Mehta and Rohit Mehta: Principles of the Power System
2. Kothari and Nagrath: Power System Engineering
wave model. Losses in fibers, Dispersion, Light sources for fibers, Photo detector connector and
splices. Fiber optic link design, Power and rise time budget, SNR and BER calculations,
Introduction to coherent optical communication WDM systems, Devices for coherent optical
communication like directional couple, Optical amplifiers, Introduction to high speed long
distance fiber optic links.
Text:
1. John Bellamy: Digital Telephony
2. T. Viswanathan: Telecommunication Switching Systems and Networks
3. J. Martin: Communication Satellite System
4. D. Raddy & Coolen: Electrical Communication
5. S.E. Miller & A.G. Chynoweth: Optical Fiber Communication
6. M.S. Roden: Analog and Digital Communication System
7. Chrin: An Introduction to Optical Fiber
Introduction to digital signal processing (DSP): Discrete-time signals and systems, analog to
digital conversion, impulse response, finite impulse response (FIR) and infinite impulse
response (HR) of discrete-time systems, difference equation, convolution, transient and steady
state response. Discrete transformations: Discrete Fourier series, discrete-time Fourier series,
discrete Fourier transform (DFT) and properties, fast Fourier transform (FFT), inverse fast
Fourier transform, Z transformation-properties, transfer function, poles and zeros and inverse Z
transform. Correlation: circular convolution, auto-correlation and cross correlation. Digital
Filters: FIR filters-liner phase filter, specifications, design using window, optimal and frequency
sampling methods; IIR filters-specifications, design using impulse invariant, bi-liner Z
transformation, least-square methods and finite precision effects.
Text:
1. Proakis: Digital Signal Processing (DSP)
2. Dag Stranneby and William Walker: Digital Signal Processing And Applications
VLSI technology: Top down design approach, technology trends and design styles. Review of
MOS transistor theory: Threshold voltage, body effect, I-V equations and characteristics, latch-
up problems, NMOS and CMOS inverter, pass-transistor and transmission gates. CMOS circuit
characteristics and performance estimation: Resistance, capacitance, rise and fall times, delay,
gate transistor sizing and power consumption. CMOS circuit and logic design: Layout design
rules and physical design of simple logic gates. CMOS subsystem design: Adders, multiplier and
memory system, arithmetic logic unit. Basic design methodologies: full custom and semi-custom
32
EEE, Session 2015~2016
design. Programmable logic arrays (PLAs), Field programmable gate arrays (FPGA), I/O
systems. VLSI testing: objectives and strategies. Introduction to VHDL Hardware description
Language.
Text Book:
1. Design of VLSI System A Practical Introduction: Linda E. M. Brackenbury
2. Basic VLSI Design: D. A. Pucknell & K. Eshraghian
Reference Book:
1. Principles of CMOS VLSI Design: Neil H. E. Weste & K. Eshraghian
2. Fundamentals of Digital Logic with Verilog Design: S. Brown & Z. Vranesic
EEE4191 Project
50 Marks, 0.50 Unit, 2 credits
Protective relaying: Relay voltage rating, high, medium and low. Basic protective zone.
Relaying Scheme.
Electromechanical Relays: Principal general equation. over current, balanced current,
overvoltage, distance, directional, positive sequence, negative sequence and differential relays
and their applications.
Static relays: Introduction to solid state device in the construction of static relays. Different
type of static relays. Generator protection. Transformer protection, Bucholzs relay. Protection
of bus bar, transmission line, feeder etc. Relay testing.
Text:
1. Sunil S. Rao: Switchgear protection and power systems
2. T. S. Madhava Rao: Power System Protection Static Relays
Microwave Electronics: Transit time effect velocity modulation. Microwave amplifier and
oscillator, Klystron (Multicavity and reflex), Magnetron, TWT. Semiconductor microwave
devices.
Microwave Antenna: Horn antenna, Rhombic and slot antenna; parabolic antenna. Antenna
arrays and their feeding techniques.
Text
1. Y. Liao: Microwave Devices and Circuits Devices
2. K.A. Bakshi A.P. Godse and U.A. Bakshi: Antennas And Wave Propagation
EEE4280 Seminar
50 Marks, 0.50 Unit, 2 credits
Fiber optic transmitter and receiver designs. Link analyses. Line Coding. Coherent optical
communication systems. Multiplexing schemes. Local area networks, FDDI, SONET and SDH.
Fiber optic sensors and signal processing. Optical Amplifiers. Photonic Switching. Solutions in
optical fibers.
34
EEE, Session 2015~2016
Reference Books:
1. John M. Senior : Optical Fiber Communications
2. Gerd Keiser: Optical Fiber Communications
35