Beruflich Dokumente
Kultur Dokumente
Frequency (kHz)
dB ref. 1V/(m/s)
Temperature C
Operating Freq.
Connector Type
Peak Sensitivity
Shock Limit (g)
Recommended
Directionality
*
Face Material
Case Material
Sensor Model
DiaxHT (mm
Accessories
Connection
Comments
Range (kHz)
Dimension
Grounding
[Inch]) (1)
Operating
[1V/ubar]
Seal Type
Resonant
Location
Weight
(gm)
(dB)
(2)
General Purpose Sensors
16x23 Stainless Steel Stainless Steel Microdot 81 30 1232-1 Cable,
A3
[.4x.9]
31 -65 to 177 500
(304) (304) 10-32
SIDE
[-73]
30-55
[35]
1.5 A EPOXY 10-32 Stud Mount
MHSTD Hold-Down
24x20 Stainless Steel Dual 82 Differential with 1
D9241A 56 -45 to 125 500 Ceramic SIDE 20-60 30 N/A B EPOXY MHD9241A Hold-Down
[.94x.79] (304) BNC [-70] Meter Cable
19x22 Stainless Steel 80 1232-x SMA Cable
R3a
[.75x.88]
41 -65 to 175 500
(304)
Ceramic SMA SIDE
[-63]
25-70 29 1.5 B EPOXY
MHR15A Hold-Down
R6 Refer to R6a
Wideband Sensors
18x17 Stainless Steel Dual 55 475 True Differential
D9202B
[.7x.65]
(8) -65 to 125 500
(304)
Ceramic
BNC
SIDE
[-53]
400-700
[575]
1.5 B EPOXY
Design
MHSTD Hold-Down
Medium Frequency
20.6x27 Stainless Steel
PK6I 45 -35 to 80 500 Ceramic SMA SIDE 106 35-65 55 1.5 1234-SMA/BNC-X
[0.812x1.06] (304)
6.2x14 BNC or
HD50
[.25x.56]
1 -65 to 125 500 Brass Brass
SMA
TOP [-70] 400-750 500 N/A A EPOXY (10)
Differential Sensors
24x20 Stainless Steel Dual 85 Differential with 1 meter
D9241A
[.94x.79]
(8) -45 to 125 500
(304)
Ceramic
BNC
SIDE
[-70]
10-60 30 1.5 B EPOXY
cable
19x22 Stainless Steel Dual 75 55 Differential with 1 meter MHSTD Hold-Down
R6D
[.75x.84]
(8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-64]
35-100
[90]
1.5 B EPOXY
Dual BNC connector cable
Stainless Steel Dual 69 75 Differential with 1 meter MHSTD Hold-Down
R15D 18x17 [.7x.65] (8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-63]
50-200
[150]
1.5 B EPOXY
Dual BNC connector cable
Stainless Steel Dual 58 300 Differential with 1 meter MHSTD Hold-Down
R30D 18x17 [.7x.65] (8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-62]
150-400
[330]
1.5 B EPOXY
Dual BNC connector cable
Stainless Steel Dual 62 100 Diff
Differential
ti l with
ith 1 meter
t MHSTD Hold-Down
Hold Down
R50D 18x17 [.7x.65] (8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-62]
100-700
[500]
1.5 B EPOXY
Dual BNC connector cable
Stainless Steel Dual 58 200 Differential with 1 meter MHSTD Hold-Down
R80D 18x17 [.7x.65] (8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-62]
200-1000
[800]
1.5 B EPOXY
Dual BNC connector cable
18x17 Stainless Steel Dual 55 475
D9202B
[.7x.65]
(8) -65 to 125 500
(304)
Ceramic
BNC
SIDE
[-53]
400-800
[575]
1.5 B EPOXY True Differential Design MHSTD Hold-Down
29x30 Stainless Steel SIDE 96 125 40 dB gain Integral Pre- 1234-X Cable,
WDI-AST
[1.13x.1.16]
70 -45 to 85 500
(304)
Ceramic BNC
(3) [-25]
150-850
[500]
1.5 B EPOXY
Amp for 50 load MHSTD Hold-Down
10x12 Stainless Steel Dual 65 125 Differential with 1 meter
Micro30D
[.4x.5]
(8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-67.5]
100-350
[225]
1.5 B EPOXY
Dual BNC connector cable
10x12 Stainless Steel Dual 57 250 Differential with 1 meter
Micro80D
[.4x.5]
(8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-65]
175-900
[325]
1.5 B EPOXY
Dual BNC connector cable
10x12 Stainless Steel Dual 62 250 Differential with 1 meter
Micro100D
[.4x.5]
(8) -65 to 177 500
(304)
Ceramic
BNC
SIDE
[-64]
200-900
[325]
1.5 B EPOXY
Dual BNC connector cable
23x19 Stainless 65 175 2 Meter Pigtail Cable.
ISD9203B
[.89x.76]
27 -45 to 125 500
Steel/Epoxy
Ceramic Pigtail SIDE
[-60]
150-850
[500]
1.5 B EPOXY
Maximum 5 Meters
23x19 Stainless 55 125 2 Meter Pigtail Cable.
ISWD
[.89x.76]
27 -45 to 125 500
Steel/Epoxy
Ceramic Pigtail SIDE
[-63]
150-850
[650]
1.5 B EPOXY
Maximum 5 Meters
Airborne Sensors
29x51 Anodized (11); 40 dB Integral
AM2I 81 -25 to 75 500 Stainless Steel BNC TOP [-3] 22-25 [23] 35 A EPOXY
[1.13x2.0] Aluminum Preamplifier
29x51 Anodized (11); 40 dB Integral
AM4I 81 -25 to 75 500 Stainless Steel BNC TOP [0] 39-42 [40] 30 A EPOXY
[1.13x2.0] Aluminum Preamplifier
Rolling Sensor
1.19" mm dia. Anodized Silicone
RS30
wheel
200 0 to 125 500
Aluminum Rubber
Micro Dot SIDE [-74] 160-340 [300] 1.5 A EPOXY Rolling Sensor
Notes:
(1) Dimensions are rounded approximations
(2) Peak g in any direction
(3) Sensors are available to order with connector location on top
(4) Sensor S9208 is a displacement transducer, and peak sensitivity is expressed in volts/ m.
(5) Unidirectional sensor, 90 degree off axis.
(6) Sensors supplied with top connector has the same diameter but with different height.
(7) Underwater sensors can subject up to 200 PSI water pressure.
(8) Sensor supplied with integral cable. Weight of sensor is not available.
(9) Also available in differential configuration.
(10) Also available with integral cable.
(11) The directionality given for the airborne sensor is the beam angle at -3 dB.
*This is the Frequency Range that the Sensor has the highest sensitivity. However, the Sensor can operate
Grounding: in other frequencies. Please consult the calibration certificate of the sensor or MISTRAS customer service or
(A) Case ground. Need to use an alumina disk to isolate from mounting surface in application. sales department for further information
(B) Case grounded and isolated from mounting surface.
Specifications subject to change without notice. Copyright 2010 MISTRAS Group, Inc.