Beruflich Dokumente
Kultur Dokumente
CNC Parameters
G1 - 1 (9600 baud)
G2 - 3 (2 stop bits)
G3 - 0 (even parity)
G4 - 0 (Disable parity check)
G5 - 3 (8 data bits)
G6 - 1 (EOB or EOR as terminator)
G9 - 1 (CR/LF for EOB)
G10 - 3 (XON/XOFF handshaking)
G11 - 0 (No DC Code parity)
G12 - 0 (No DC2/DC4 output)
G13 - 50 (Reply waiting time)
G31 - xxxxx00 (ISO code, no parity check)
G33 - 0 (no leader)
G34 - 0 (no spaces after O-number)
G35 - 0 (no spaces between program)
G39 bit 0 - 1 to accept M2 programs; 0 to reject
G39 bit 2 - 1 Input/Output Program #
G39 bit 3 - 0 for 8-digit work# or 1 for 4-digit
G39 bit 4 - 1 output material data in ASCII
Remember: bit 0 is always the RIGHT-most bit.
G48 - 0 Usual tape operation
PC DNC Settings
Baud: 9600
Code: 7 data bits / ASCII Even
Stop Bits: 2
EOB: CR/LF
Handshaking: XON/XOFF
ADVANCED
Leader: %CRLF
Trailer: %
Skip lines which contain: %
Additional Notes
Note: The transfer of Mazatrol programs with CMT IO requires
PC-DNC plus 3.3.1 or later.
Tip: To avoid keying in program #'s for Mazatrol input, use the
DATA IO -> CMT -> CMT CONTENTS function to load file
contents onto the screen. Then select LOAD NC <- CMT and
click START. Values will remain filled in for you.