Beruflich Dokumente
Kultur Dokumente
Tubing
Irrigation Tubing
Product Features
Virtually every size is available in either polyethylene or
flexible vinyl on weather resistant cardboard reels
All Jain polyethylene tubing is manufactured using Union
Carbide materials that offer the exclusive Fingerprint
identification feature and contain a minimum of 2% carbon
black for UV protection
Strict quality control procedures ensure highest uniformity
and product quality
Polyethylene and vinyl tubing are available in black (standard)
and special colors (upon request)
Complete information printed on the tubing indicates
manufacturer, model number, dimensions, resin, and date of
manufacture. As applicable, the coil length is also included.
Hose may be ordered with holes pre-punched to ease field
installation of emitters
Convenient coil sizes and packaging to ease handling and
installation
The Industries Longest Warranty: 10 Years. (see price list for
warranty details)
2
Micro/Distribution Tubing
Flow vs. Pressure Micro/Distribution Tubing - Pressure vs. Flow
10
9
8
psi Loss / 100 feet
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
Flow (gpm)
3
Supply Tubing
Flow vs. Pressure Loss Supply Tubing - Pressure vs. Flow
10
9
8
psi Loss / 100 feet
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 25 30 35 40 45 50 55 60
Flow (gpm)
4
Supply Tubing
Supply Tubing Friction Loss and Velocity
940x830 1200x1060 1550x1390 1800x1600 2325x2075
0.83 1.06 1.39 1.6 2.075
Friction Loss Velocity Friction Loss Velocity Friction Loss Velocity Friction Loss Velocity Friction Loss Velocity
gph psi/100 fps psi/100 fps psi/100 fps psi/100 fps psi/100 fps
1 0.14 0.59 0.04 0.36 0.01 0.21 0.01 0.16 0.00 0.09
2 0.46 1.18 0.14 0.73 0.04 0.42 0.02 0.32 0.01 0.19
3 0.94 1.78 0.29 1.09 0.08 0.63 0.04 0.48 0.01 0.28
4 1.55 2.37 0.48 1.45 0.13 0.84 0.07 0.64 0.02 0.38
5 2.29 2.96 0.72 1.82 0.20 1.06 0.10 0.80 0.03 0.47
6 3.15 3.55 0.99 2.18 0.27 1.27 0.14 0.96 0.04 0.57
7 4.12 4.15 1.29 2.54 0.36 1.48 0.18 1.12 0.05 0.66
8 5.21 4.74 1.63 2.90 0.45 1.69 0.23 1.28 0.07 0.76
9 6.40 5.33 2.00 3.27 0.55 1.90 0.28 1.43 0.08 0.85
10 7.70 5.92 2.41 3.63 0.66 2.11 0.34 1.59 0.10 0.95
12 10.59 7.11 3.31 4.36 0.91 2.53 0.47 1.91 0.14 1.14
14 13.87 8.29 4.34 5.08 1.20 2.96 0.61 2.23 0.18 1.33
16 17.53 9.48 5.48 5.81 1.51 3.38 0.78 2.55 0.23 1.52
18 21.54 10.66 6.74 6.54 1.86 3.80 0.95 2.87 0.28 1.71
20 8.10 7.26 2.24 4.22 1.15 3.19 0.33 1.90
25 11.98 9.08 3.31 5.28 1.69 3.98 0.49 2.37
30 16.48 10.89 4.55 6.34 2.33 4.78 0.68 2.84
35 5.96 7.39 3.05 5.58 0.89 3.32
40 7.52 8.45 3.86 6.38 1.12 3.79
45 9.24 9.50 4.74 7.17 1.38 4.26
50 5.70 7.97 1.66 4.74
55 6.73 8.77 1.96 5.21
60 7.84 9.56 2.28 5.69
Green Boxes: Not Recommended to use tubing above 5 fps
5
IPS Vinyl Pipe
IPS Flexible Vinyl Pipe offers more flexibility, durability and
shock resistance to an irrigation system than standard PVC pipe
can provide.
Product Features
Heavy duty pipe for use as risers or swing joints
Heavy wall thickness makes tight bends possible
without kinking
Available in 1/2 3/4 and 1 IPS (Iron Pipe Size)
Coils of 100 and 200 in 1/2 and 3/4 sizes,
100 in 1 size
Pre-cut lengths are also available
Flexible pipe can be readily assembled using standard
Schedule 40 PVC fittings with flexible to rigid PVC adhesive
(IPS #2795 or equivalent)
6
Pressure Rating
There are no established standards for pressure rating non-reinforced vinyl pipe for the irrigation
industry. Several of the large manufacturers of industrial non- reinforced clear vinyl tubing use working
pressures that are calculated at a 1:5 ratio relative to burst pressure.
Jain Vinyl IPS Pipe was tested independently by the United States Testing Laboratory to determine
burst strength according to ASTM D-1599 at 73 F and at 120 F, for , and 1 sizes. Using
the lowest value of hoop stress at burst for all samples at 73 F, the following suggested maximum
operating pressures are derived, using a conservative 1:6 ratio.
Shore Durometer Specific Gravity Brittle Temperature Ultimate Elongation Ultimate Tensile Strength
A Scale (ASTM-D676) (ASTM-D792) (ASTM D-746) (ASTM D-4120) (ASTM-D412)
Instantaneous: 92
10 second delay: 88
1.40 +.02 -22 F 265% 2900 psi
Flow vs. Pressure Loss IPS Vinyl Pipe - Pressure vs. Flow
10
9
8
psi Loss / 100 feet
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 12 14 16
Flow (gpm)
7
IPS Flexible Tubing Friction Loss
1/2 IPS 3/4 IPS 1 IPS 1/2 IH 5/8 IH 3/4 IH
0.375 0.52 0.60 0.62 0.71 0.750
Friction Loss Velocity Friction Loss Velocity Friction Loss Velocity Friction Loss Velocity Friction Loss Velocity Friction Loss Velocity
gph psi/100 fps psi/100 fps psi/100 fps psi/100 fps psi/100 fps psi/100 fps
1 1.00 1.37 0.23 0.74 0.07 0.45 1.52 1.63 0.53 1.04 0.22 0.73
2 3.37 2.74 0.78 1.48 0.23 0.89 5.11 3.26 1.77 2.09 0.75 1.45
3 6.85 4.11 1.59 2.22 0.48 1.34 10.40 4.90 3.60 3.13 1.52 2.18
4 11.33 5.47 2.64 2.96 0.79 1.78 17.20 6.53 5.96 4.18 2.51 2.90
5 16.74 6.84 3.90 3.71 1.16 2.23 25.42 8.16 8.81 5.22 3.70 3.63
6 23.02 8.21 5.36 4.45 1.60 2.67 34.97 9.79 12.12 6.27 5.10 4.35
7 7.02 5.19 2.10 3.12 15.87 7.31 6.68 5.08
8 8.87 5.93 2.65 3.56 8.43 5.80
9 10.90 6.67 3.26 4.01 10.36 6.53
10 13.11 7.41 3.92 4.45
12 5.39 5.35
14 7.05 6.24
16 8.91 7.13
Cut Length Friction Loss Friction Loss Friction Loss Friction Loss Friction Loss Friction Loss
jainsusa @jainsusa
2851 E. Florence Ave. P.O. Box 3760 740 Water St. 3777 State Road 544 East
Fresno, CA 93721 Ontario, CA 91761 Watertown, NY 13601 Haines City, FL 33844
Ph 559-485-7171 Ph 909-395-5200 Ph 315-755-4400 Ph 863-422-4000
Fx 559-485-7623 Fx 909-395-5202 Fx 315-755-4401 Fx 863-422-6400
8
Part#91500059 / Rev#15 / 6-30-2014