Beruflich Dokumente
Kultur Dokumente
Loader)
3.) Click on [Restore] button to retrieve SRAM Data
(Boot
Quick Reference
Entering the Boot Loader: 1.) Click on the [ Settings } button and the following - Select "1.SRAM BACKUP" The following confirmation
message box should appear: message is displayed. To start backup, press the [YES]
Turn the power on CNC Control while simultaneously soft key.
pressing the two soft keys at the right end. - Upon the termination of backup, the system displays
the following message. Press the [SELECT] soft key.
NOTE:
If no soft keys are provided as with a touch panel, use MDI
numeric keys 6 and 7. CAUTION: Do not change the name of this file Control
2.) Select "Memory Card on CNC": Specify the memory will not recognize it by other name.
card slot of the CNC. CAUTION: Do not load this file to any other CNC
-Or except the one it came from, it will corrupt control
3.) Select Folder and use the Browse button to select a memory requiring a Service Call.
storage device connected to the PC.
2 3 4