Beruflich Dokumente
Kultur Dokumente
ELECTRO-MAGNETIC COMPATIBILITY
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
COMPREHENSIVE FEATURE LIST TO SUIT A control panel with the supplied sealing gasket.
DSENET RS232 AND USB CONFIGURABLE DC OUTPUTS ANALOGUE EMERGENCY DC POWER
EXPANSION RS485 PORT INPUTS SENDERS STOP SUPPLY 8-35V
DEUTZ
DSE7310/20 ISUZU
PERKINS
CATERPILLAR
MTU
7 VOLVO
CUMMINS
OTHER SCANIA
MAINS (UTILITY) N/C VOLT FREE N/O VOLT GENERATOR SENSING CHARGE FUEL & CRANK ELECTRONIC
SENSING OUTPUT FREE OUTPUT ALTERNATOR OUTPUTS ENGINES &
DSE7320 ONLY (Flexible with CAN) MAGNETIC PICK-UP
ISSUE 6
DSEGenset
DSE7310/20 SPECIFICATION
DC SUPPLY
FREQUENCY RANGE
KEY FEATURES Reverse power (kW & kV Ar) DSENet expansion compatible 3.5 Hz to 75 Hz
4-Line back-lit LCD text display protection Heated display option available
OUTPUTS
Five key menu navigation LED and LCD alarm indication OUTPUT A (FUEL)
Front panel editing with PIN Power monitoring (kW h, kV Ar, kV KEY BENEFITS 15 A DC at supply voltage
protection A h, kV Ar h) 132 x 64 pixel ratio display for
OUTPUT B (START)
Customisable status screens Load switching (load shedding clarity 15 A DC at supply voltage
Power save mode and dummy load outputs) Real-time clock provides accurate
Support for up to three remote Automatic load transfer (DSE7320) event logging OUTPUTS C & D
8 A 250 V (Volt free)
display units Unbalanced load protection Multiple date and time scheduler
9 configurable inputs Independent Earth Fault trip Set maintenance periods can be AUXILIARY OUTPUTS E,F,G,H
8 configurable outputs True dual mutual standby with load configured to maintain optimum 2 A DC at supply voltage
Flexible sender inputs balancing timer (DSE7310 only) engine performance GENERATOR
Configurable timers and alarms USB connectivity Ethernet communications (via VOLTAGE RANGE
3 configurable maintenance Backed up real time clock DSE855 module), provides 15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
alarms Fully configurable via DSE advanced remote monitoring
Multiple date and time scheduler Configuration Suite PC software Modules can be integrated into FREQUENCY RANGE
Configurable event log (250) Configurable display languages building management systems 3.5 Hz to 75 Hz
CAN engine support Remote SCADA monitoring via (BMS) MAGNETIC PICK UP
Integral PLC editor DSE Configuration Suite PC Increased input and output VOLTAGE RANGE
Easy access diagnostic page software expansion capability via DSENet +/- 0.5 V to 70 V
CAN and Magnetic Pick-up/Alt. User selectable RS232 and RS485 Licence-free PC software FREQUENCY RANGE
sensing communications IP65 rating (with supplied gasket) 10,000 Hz (max)
Fuel usage monitor and low fuel Configurable Gencomm pages offers increased resistance to
DIMENSIONS
alarms Advanced SMS messaging water ingress OVERALL
Charge alternator failure alarm (additional external modem PLC editor allows user 240 mm x 181 mm x 42 mm
Manual speed control (on required) configurable functions to meet 9.4 x 7.1 x 1.6
compatible CAN engines) Start & stop capability via SMS specific application requirements PANEL CUT-OUT
Manual fuel pump control messaging 220 mm x 160 mm
Engine exerciser Additional display screens to help 8.7 x 6.3
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-051/10/11 (13) US
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457