Beruflich Dokumente
Kultur Dokumente
PATCH CONTROLS
MACRO CONTROLS
SYNTH CONTROLS
Overview
The Circuit Editor is laid out in a logical fashion from top to bottom.
Select the Synth you want to edit with the choice at the top left and then use
the Patch Controls to Load or Save Patches to and from the Circuit.
The Macro Controls section dictates how the 8 Encoders behave in each
patch whilst the Synth Controls give fine control over everything else.
MaxforLive Version
Currently only compatible with MAC OS, simply drop this on a MIDI track and
watch the menu turn Cyan when the Circuit is attached and the handshake is
successful. Press the I logo at the bottom right to rescan for the Circuit if its
removed for any reason.
Standalone Versions
For the standalone versions we have packaged them with all the files that
you need so you dont need to have a separate installation of Max or
MaxforLive
Configuration
Thankfully weve made this as simple as possible for you, with the Circuit
connected open the device and navigate to the main window.
In the top left youll see the section for MIDI Port which if connected
successfully will display the Circuit and turn Cyan. The screen shot below
shows it in Red to indicate that the Circuit is not connected.
VIEW CONTROL
FULL will show all of the available options in the window, if Screen Real
Estate is at a premium you can either choose to use the Zoom Control
percentages or switch to Macros only view.
The small button in the header will give Color Control over the currently
selected Synth display.
MACRO VIEW
Improved for this version you can now see at a glance the destinations that
are being controlled by each macro.
--------------WARNING-----------
This editor will allow you to overwrite patches on your circuit. If you have
accidentally overwritten patches, or want to get your unit back to its original
state, then please read below.
Patch Control
1. Load Circuit Editor. It will load with the original factory bank in the
Library Control Section:
3. Click OK. You will see the Save button on your circuit pulse for about
20 seconds whilst all 64 patches are uploaded.
Circuit has 32 sessions slots available. When you save a session, you are
saving all the notes and automation, but you are also saving all the settings
that make up the 2 synth patches. Therefore if you change a patch using the
Editor (or via external MIDI CCs) then any changes to the patch are saved
with the session.
So the quickest way to save your changes to a patch is simply save the
session on your hardware, and when you reload the session, it will load up
and sound exactly the same as when you saved it!
The down side to this is if you have made an awesome patch, its only saved
in the session. So if you want to be able to use the same patch in other
sessions, then youll want to overwrite one of the 64 patches on the unit.
Now youll have to start to make decisions about which of the 64 patches
you are going to overwrite.
One thing that you dont need to worry about is your existing sessions If
you overwrite Patch 1 (Bass-ic Square) with your new one (Amazing Bass)
all the sessions that used the original Bass-ic Square patch will still sound
the same. However you will no longer be able to select Bass-ic Square
patch in any new sessions as it has been overwritten. You will now only be
able to select Amazing Bass in your new sessions.
On your Circuit, press Shift + Synth1 (or Synth 2) and choose the
preset that you want to edit.
This method will have the Editor follow the patch selection from the
hardware.
Note that this does not update the Library control list. (Library control drop
down list is more useful when creating a whole bank of patches so you can
ignore it for now)
Circuit Editor is quite a complex synth editor, but we hope that its laid out
well enough that you find your feet quickly, but please tread carefully!
I presume youve just spent the last 10 minutes making a patch. Now you
need to decide what to do with it.
This is the most simple: Just press Save (twice) on your Circuit.
The edited patch is saved in the session, and when re-loading the session,
youll recall the patch.
You will not be able to access the patch in any other sessions.
Overwriting a Patch.
I want to use this patch in new sessions that I create
I want to overwrite an existing patch, replacing the old one with this new
one
Remember this action will overwrite the original factory sound with your new
one.
TIP: Press Shift + Synth 1 (or Synth 2) to see which patch is currently
loaded. Note which one of the Oct (Patches 1-32) or Oct (Patches
33-64) is lit up, and then which patch slot is lit up, then press the
corresponding patch number in the below window.
Click on the drop down list in the library control section of the editor.
Select the patch that you want to hear, and it will be loaded to the Circuit
Hardware.
NOTE: Selecting Patch 35 will not make your Circuit jump to patch position
35, it will load Patch 35 into whichever Patch location you are currently using.
If you are working to create a bank of patches, this should not matter, as the
end result is to save 64 patches to this list, then upload all 64 patches at the
end.
You may prefer to load a bank of initialised patches first. Youll find an
init_bank.json file in your downloaded folder.
Press Load Bank from Disk, and select the Init_bank.json file. This will load
up 64 initial patches.
Start designing your patches, and storing them to the list as described
above.
Troubleshooting
A, When you turn on the unit whilst pressing SHIFT, you get a settings page.
On the left are 2 buttons for Receive MIDI and Send MIDI these settings
eect both DIN and USB MIDI in and out of the unit. Make sure both of these
are Green, then press Play to boot up the unit.
Q, Ive downloaded the DMG file and when opening can see the Circuit Logo
on the .app file, clicking it results in no action/states the DMG is damaged
A, Go to Apple > Menu > System Preferences, Allow apps downloaded from
Click anywhere. Restart the installer - BINGO!