Beruflich Dokumente
Kultur Dokumente
Do a Boot Monitor Start : Hold down F1 and F5 simultaniously while the robot reboots
Restoring A Fanuc Robot Image Backup
Acknowledge Directory
Restoring Image
Configuration Menu
If the Image came from its own backup Choose Item 2 Cold Start (Image Restore Completed)
If the Image came from a different Robot Choose Item 3 Controlled Start (F_Number needs to be Updated)
Restoring A Fanuc Robot Image Backup
If the Image came from a different Robot Controlled Start (F_Number needs to be Updated)
Menu 1 Tool Setup
Change the Current F_Number to the correct number corresponding to the robot located on Ccontroller
Restoring A Fanuc Robot Image Backup
DONE