Beruflich Dokumente
Kultur Dokumente
AnyService UniPortal
User Guide (Multi-Office)
Version 1.05.10
ZTE CORPORATION
ZTE Plaza, Keji Road South,
Hi-Tech Industrial Park,
Nanshan District, Shenzhen,
P. R. China
518057
Tel: (86) 755 26771900
Fax: (86) 755 26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of
this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPO-
RATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION
or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are dis-
claimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-in-
fringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the
information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject
matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee,
the user of this document shall not acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
Revision History
Chapter Summary
Typeface Meaning
Constant Text that you type, program code, files and directory
width names, and function names.
[ ] Optional parameters.
{ } Mandatory parameters.
Typeface Meaning
Typeface Meaning
How to Get in The following sections provide information on how to obtain sup-
Touch port for the documentation and the software.
Customer Support If you have problems, questions, comments, or sugges-
tions regarding your product, contact us by e-mail at sup-
port@zte.com.cn. You can also call our customer support center
at (86) 755 26771900.
Documentation ZTE welcomes your comments and suggestions on the quality and
Support usefulness of this document. For further questions, comments, or
suggestions on the documentation, you can contact us by e-mail
at support@zte.com.cn; or you can fax your comments and sug-
gestions to (86) 755 26770801. You can also browse our website
at http://ensupport.zte.com.cn, which contains various interesting
subjects like documentation, knowledge base, forum and service
request.
System Login
Table of Contents
Logging In to the AnyService UniPortal .................................. 1
Introduction to the Main Page .............................................. 3
Note:
The URL of the UniPortal is configurable. For more information,
refer to the "Adding Office Information" procedure in ZXME
WAP Gateway Device Management User Guide.
END OF STEPS
No. Description
5 Split bar. Clicking the arrow on the bar will hide or expand
the topology tree/collapsible menu.
12 < > button. This button allows you to view menu items on
the left or right side when some opened UniPortal menu
items cannot be displayed within the window.
13 Clicking this button will close all the opened menu items.
No. Description
15 Operation area
Device Configurations
Table of Contents
Overview........................................................................... 5
Configuring Area Information ............................................... 6
Configuring Office Information.............................................. 7
Synchronizing Device Configurations ..................................... 8
Overview
Device parameters must be configured in the AnyService UniPortal
system so that performance statistics and alarm information can
be collected for devices of the WAP GW system. Necessary infor-
mation must be specified in the system for major WAP GW devices
to implement unified monitoring on device operations.
Device Device configurations include:
Configuration
Information 1. Area settings: Area settings are required before configuring
subordinate office settings and multi-office settings.
2. Office settings: multi-office settings and subordinate single-
office settings
3. Device configuration synchronization: Synchronize single-of-
fice device configurations to the device configuration mainte-
nance table for the multi-office system
Procedures The table below lists the procedures for configuring device param-
eters.
An integer between
1~999
Make sure to enter
the proper area
code. It cannot
be modified after
Area code Area code it is added.
Configuring Office
Information
Purpose Configure multi-office settings and subordinate single-office set-
tings.
Office settings include the area where the office is located, product
type and the address of the ZTE AnyService UniPortal.
Prerequisites Before you begin, ensure that:
You have logged in to the ZTE AnyService UniPortal system.
You have the system administrator rights (as user super) or
device management rights.
Area settings have been configured.
Steps 1. Select Device > Bureau Info to go to the page as shown
below.
Synchronizing Device
Configurations
Purpose Synchronize all device configurations of a single office to the multi-
office system after configuring the single office.
Prerequisites Before you begin, ensure that:
You have logged in to the ZTE AnyService UniPortal system.
You have the system administrator rights (as user super) or
device management rights.
Device information have been configured for the single office.
Steps 1. Select Device > Bureau Info to go to the page as shown
below.
2. Select the office for which you want to synchronize device con-
figurations and click the button. A syn-
chronization message appears.
Note:
The device configuration synchronization overwrites all the
previous device configurations of the single office configured in
the multi-office system with the latest device configurations.
Note:
After successful synchronization, you can view the device in-
formation by clicking Device > Device Info.
END OF STEPS
Subscriber Account
Configurations
Table of Contents
Overview..........................................................................11
Adding a User Account .......................................................11
Adding User Accounts in a Batch..........................................15
Activating User Information ................................................17
Modifying User Information .................................................17
Deleting User Information...................................................19
Overview
Functions ZTE AnyService UniPortal allows you to create accounts man-
ually through a terminal and synchronize account information
to the database and all the service processors for the single
office.
ZTE AnyService UniPortal provides the following manual
account creation functions: adding, modifying, deleting and
querying accounts and querying operation logs.
Procedures The table below lists the procedures for configuring device param-
eters.
Postrequisite After adding the user account, you must activate it in the database
and all the service processors for the subordinate single-office to
make it effective. For more information, refer to Activating User
Information.
Ac- Ac-
MIN/ Ter- Ter- count count
mi- Net- minal PUSH open- open-
Mobile MINIF nal work browser network NAS APN ing ing
number AST type type type type name name type time
Manual 2009-
123213213 account 06-25
213213213 GPRS GSM opening 10:23:39
Manual 2009-
account 07-31
220220 GPRS GSM opening 10:39:46
Manual 2009-
account 07-28
421222 GPRS GSM opening 17:17:45
3. Click the Browse button and select the *.xls file you have
configured.
Note:
Import modes:
Increment Import: Import new user information without
deleting previous user account information.
Increment Import: Import new user information without
deleting previous user account information.
Postrequisite After adding the user account information in a batch, you must
activate it in the database and all the service processors for the
subordinate single-office to make it effective. For more informa-
tion, refer to Activating User Information.
FIGURE 16
Postrequisite After modifying the user account information, you must activate it
in the database and all the service processors for the subordinate
single-office to make it effective. For more information, refer to
Activating User Information.
Postrequisite After deleting the user account information, you must activate it
in the database and all the service processors for the subordinate
AnyService UniPortal
Common Operations
Table of Contents
Overview..........................................................................21
WAP Gateway CDR Log Query .............................................22
Operation Log Query ..........................................................33
MML Command Operations .................................................38
Device Password Management.............................................39
Modifying System Configuration Files ...................................42
Monitoring Network Statuses...............................................46
Switching to Single-Office Mode...........................................47
Overview
Operation This chapter introduces routine maintenance operations performed
Description on the ZTE AnyService UniPortal. The following table provides an
operation description.
Operation Description
Operation Description
Required. The
start time and the
end time must be
Time range of the log within the same
Start Time query month.
Note:
If the Pull logs in a query result exceed 4000 records, the Uni-
Portal will display a message to indicate the result cannot be
saved at a time and ask you to fill in the Start Log Number
and End Log Number for the logs you want to save.
Parameter Description
Gateway receive URL response The response time for the WAP
time Gateway to receive the URL
returned by the SP.
Parameter Description
End time of the The start time and the end time
End Time query must be within the same month.
Parameter Description
Push News arrives PPG time Time during which the Push
message is arrived.
Note:
If the Radius logs in a query result exceed 4000 records, the
UniPortal will display a message to indicate the result cannot
be saved at a time and ask you to fill in the Record start
number and Record end number for the logs you want to
save.
Parameter Description
Note:
If the Socket logs in a query result exceed 4000 records, the
UniPortal will display a message to indicate the result cannot
be saved at a time and ask you to fill in the Start Log Number
and End Log Number for the logs you want to save.
Parameter Description
Gateway receive URL response The response time for the WAP
time Gateway to receive the URL
returned by the SP.
Required, which is a
User Mobile Tele- The user mobile num- 11-digit mobile num-
phone ber you want to query ber
3. Clicking the Export button allows you to export all the Socket
logs meeting the query conditions.
Note:
If the Socket logs in a query result exceed 4000 records, the
UniPortal will display a message to indicate the result cannot
be saved at a time and ask you to fill in the Start Log Number
and End Log Number for the logs you want to save.
User Request aim The Internet host obtained from the original
IP Address URI pull accessed by the user
Aim address port The port number obtained from the original
number URI pull accessed by the user
Gateway transmit
response to hand- The response time for the WAP Gateway send-
set ing response to terminal
2. Set query criteria and click the Search button. A query result
is as shown below.
Tip:
To export all the query results, click the Export button and
save the result.
Tip:
To export the log, click the Export and save the log.
END OF STEPS
2. Set query criteria and click the Search button. A query result
is as shown below.
Tip:
To export all the query results, click the Export button and
save the result.
Tip:
To export the log, click the Export and save the log.
END OF STEPS
2. Set query criteria and click the Search button. A query result
is as shown below.
Tip:
To export all the query results, click the Export button and
save the result.
Tip:
To export the log, click the Export and save the log.
END OF STEPS
Device Password
Management
Changing the System Password
Purpose Perform this procedure to change the system password. Changing
the system password will change the login passwords for operating
systems on all the service nodes.
Caution:
An improper operation may cause a great impact on the system,
so use this function with caution.
Caution:
An improper operation may cause a great impact on the system,
so use this function with caution.
Parame-
ter Description Setting
Current password
Current for the service Enter the current database
password node database password
Parame-
ter Description Setting
Confirm
new Confirm the new Re-enter the new password and
password password you make sure the passwords you
entered entered match.
Modifying System
Configuration Files
Purpose System configuration includes the management and operations on
the system configuration files.
Caution:
An improper modification may cause a great impact on the system,
so use this function with caution.
Note:
The configuration file is located in the tomcat\temp direc-
tory.
Purpose Actions
Upload Click the Upload button.
Note: Upload the modified Note: The system displays
file to the source directory of an operation successful mes-
the configuration file. sage if the file is uploaded
successfully.
Note: The modification can-
not be cancelled after the file
is uploaded.
Read again Clicking the Read Again but-
ton will refresh the content
If you have modified the displayed.
content of the configura-
tion file but has not applied Note: The system displays
Save2Bak, the modification an operation successful mes-
will be recovered to the pre- sage if the file is read suc-
vious content. cessfully.
If you have applied
Save2Bak, the modified
content will be displayed.
The configuration file that
the system reads again is the
file downloaded to the tom-
cat\temp directory.
Download to backup Click the Down2Bak button.
Re-download the file from the Note: The system displays
original directory to the tom- a download finished message
cat\temp directory. if the file is downloaded suc-
cessfully.
If the modification is not
what you want but you have
saved the modification and
cannot recover it using the
read again function, then use
this function to re-download
the configuration file.
Prase file 1. Click the Parse file button
to go the page as shown
Parse the configuration file to below.
the common operation mode 2. After modification, click the
according to the configura- OK button to go back to the
tion definition file to allow page as shown below.
add, delete and modify oper-
ations.
END OF STEPS
Note:
To move a node to the middle of the view, move the cursor to
the node and select Set to be center from the shortcut menu.
Purpose Actions
To set the cen- Move the cursor to a non-central node to
tral node display a shortcut menu and select Set to
be center from the menu. The node will
be set as the central node. The system will
display all the nodes connected to it.
You can only set one node as the central
node.
To view node 1. Move the cursor to a non-central node to
properties display a shortcut menu. Select Properties
from the menu to display a node properties
page, as shown below.
2. Clicking the Refresh button will refresh
the properties of the node.
END OF STEPS
Switching to Single-Office
Mode
Purpose You can switch the multi-office mode over to the single-office mode
after logging in to the ZTE AnyService UniPortal.
Prerequisites Before you begin, ensure that:
You have logged in to the ZTE AnyService UniPortal.
Steps 1. On the UniPortal (multi-office) home page, select Centralized
maintenance > Brazilwapgw2[11Bureau ] to go to the
page as shown below.
END OF STEPS