AmeriPak Tray Current: Model 245 Update: Model SR 60 (60
Sealer Series) Length 100 (2540 mm) 106 Width 29 (740 mm) 26-34 Height 60 (1520 mm) 59 Weight 600 lbs. (253 kg) 600 lbs. (253 kg) Height above 34 34-38 floor Speeds 60 units per minute (120 60 units per minute (120 trays) trays) Max. Film Width 10.5 10.5 Max. Film 13 13 Diameter Heat Control Solid state control, Heated seal drum, coated non-stick thermostatically aluminum, consistent heat controlled transfer, solid state controller, quick recovery Product Flow Left to Right, facing Left to Right, facing control panel control panel Electrical Motor 1/8 HP variable speed 1/4 HP DC, 208-230 V, 1 PH, 60 Hz D.C. drive 208 V, 1 PH, 60 The current tray sealer Hz AmeriPak Model 245 has been providing years of service at SBCUSD and although it is mostly efficient, it has been deemed somewhat unreliable. Thus, looking for a new product that will fill in the missing components of the current tray sealer will not only increase production and efficiency but will save the school district any financial worry in the long run. AmeriPak has upgraded the model 245 tray sealer to the 60 series (TD60M). It features tool-free quick change tray pallets to reduce set up time, making it ideal for multiple product usage. However, looking at the spec comparisons between the two models, there is no significant difference so committing to an entire different model might not be feasible. Other future considerations that would further product life and maintenance is to add a spring to the plate end clamp part for the current model. Doing so would