Beruflich Dokumente
Kultur Dokumente
Vishwajeet Sinha
QUIZ Mar 19 GATE CE
Question 1
A transport company operates a scheduled daily truck service between P
and city Q. One-way journey time between these two cities is 85 hours. A
minimum layover time of 5 hours is to be provided at each city. How
many trucks are required to provide this service?
A 4
B 6
C 7
D 8
So, if a truck starts journey the same truck will be available only on
8th day for the new
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 1/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
Report
Question 2
A vehicle moving at 60 kmph on an ascending gradient of a highway has
to come to stop position to avoid collision with a stationary object. The
ratio of lag to brake distance is 6:5. Considering total reaction time of the
driver as 2.5 seconds and the coefcient of longitudinal friction as 0.36,
the value of ascending gradient (%) is
A 3.3
B 4.8
C 5.3
D 6.8
Correct answer
Given, V = 60 kmph
= 16.67 m, g
= 9.81 m2/s
f = 0.36
and t = 2.5 sec
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 2/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
We know,
Report
Question 3
If the standard deviation of the spot speed of vehicles in a highway is 8.8
kmph and the mean speed of the vehicles is 33kmph, the coefcient of
variation in speed is
A 0.1517
B 0.1867
C 0.2666
D 0.3646
Report
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 3/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
Question 4
A vehicle negotiates a transition curve with uniform speed v. If the radius
of the horizontal curve and the allowable jerk and R and J, respectively,
the minimum length of the transition curve is
Therefore,
Report
Question 5
A vehicle moving at 50 kmph speed was stopped by applying the brake
and the length of skid mark was 16.5 m. If the average skid resistance of
the pavement is known to be 0.687. What is the brake efciency (in%) of
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 4/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
A 43.36
B 65.04
C 86.75
D 89.62
Correct answer
Speed = 50 Kmph
Breaking distance, L = 16.5 m
Skid resistance, f = 0.687
Velocity,
Brake efciency % =
Report
Question 6
Spot speed studies were carried out at a certain stretch of a highway
with mixed trafc. What is the upper speed limitation for regulation and
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 5/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
Correct answer
Report
Question 7
Valley curves are not formed when
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 6/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
In case (a), (b) and (c) valley curve are formed but in case (d) summit
curve is formed.
Report
Question 8
As per IRC guideline, for a rotary design speed of 40 kmph, the minimum
radius of horizontal curve, when superelevation is zero, is -------------m.
[Assume coefcient of friction, f = 0.45]
A 27
B 28
C 29
D 30
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 7/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
We know that,
Minimum radius of horizontal curve,
Report
Question 9
Pradhan Mantri Gram Sadak Yojna (PMGSY), launched in the year 2000,
aims to provide rural connectivity with all-weather roads. It is proposed
to connect the habitations in plain areas of population more than 500
persons by the year
A 2005
B 2007
C 2010
D 2012
By year 2007 PMGSY, all the habitations having population more than
500 should be connected by all weather road means permanent road
having utility for all reasons.
Report
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 8/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
Question 10
In a redundant joint model, three bar members are pin connected at Q as
shown in the gure. Under some load placed at Q, the elongation of the
members MQ and OQ are found to be 48 mm and 35 mm respectively.
Then the horizontal displacement u and the vertical displacement v or
the node Q, in mm, will be respectively.
Correct answer
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 9/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
To nd vertical displacement,
A force F is applied at Q as shown
To nd horizontal displacement
A force F is applied at Q as shown
Alternaterly
Here
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 10/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
Report
Quiz Completed
SCORE RANK
6 141
out of 30 out of 312
REVIEW QUIZ
Related Posts
0 10 Mar 9
3 3
0 0
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 12/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
0 0
Sasmita Mar 19
0 0
Divya Mar 20
my score
0 0
shreyas sk Mar 20
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 13/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
0 0
0 0
Write a comment
Exams : Civil Engineering | GATE Civil Engineering | ESE CIVIL | SSC JE CIVIL | Coal India Civil Engineering |
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 14/15
4/3/2017 BARCCE:TransportationEngineeringQuiz2
Water Resources Engineering | GA | Coal India Limited Test Series | BARC Management Trainee Test Series
https://gradeup.co/barccetransportationengineeringquiz2i72943e700bba11e7b32a7e0e92078d47 15/15