Beruflich Dokumente
Kultur Dokumente
X
Denotes Delivery
Crane Stand Ref / Installation Sequence
Deploy air mat fall A
protection around
delivery vehicle
Slew
Direction
4
2
Crane required to undertake the Lift: 80 Tonne AT Liebherr LTM 1080/1 . Is Larger alternative crane permitted: No
Outrigger loadings are based on the worst case tonnes / m2 outrigger loading including the alternative: as above
The crane company must not provide a larger crane without prior agreement. If a crane larger than this is provided, do not rig up and refer to AP for guidance.
Crane Outrigger Jack Load: 35 Tonnes (LICCON) Permissible Bearing Capacity of Hardstand = 22.0 Tonnes / M
Crane Mat Size: 1740 x 1740mm = 3.02 M Pressure Applied Beneath Mats = 11.3 Tonnes / M
Client hardstand location / preparation / maintenance confirmation:
1. The permissible bearing capacity above has been provided by a competent person who assessed the adequacy of the crane hardstanding area.
2. On the day of installation (prior to commencing lifting), the Client should confirm the adequacy of the hardstanding, beneath each rig position (taking
account of deterioration since the initial assessment).
For And On Behalf Of The Client: Print Name: ***************************** Signature: *****************************