Sie sind auf Seite 1von 3

SENIOR HIGH SCHOOL DEPARTMENTAL EXAM

3rd Grading Period (March 02, 2017)


Subject Code: SHMAJORICT Description: Computer System Servicing Teacher: MR. JEFERSON BUAYA

Name of Student: ___________________________________ Level & Section: ___________________

Score: ______________ Status: __________________ Recommendation: ________________________


Computer Systems Servicing

Test I. Identification:

1. The software that supports a computer's basic functions, such as scheduling tasks,
executing applications, and controlling peripherals.
a.) Operating System b.) System Software c.) Utilities d.) Application Software

2. A piece of software that installs a program on a computer's hard disk.


a.) Installer b.) System Software c.) Utilities d.) Application Software

3. Is the process of using a USB storage device to boot or start a computers operating
system?
a.) USB Bootable b.) CD- Bootable c.) DVD- Bootable d.) Hard disk drive

4. This network cable is made of 4 pair high performance cable that consists of twisted pair
conductors that used for data transmission. UTP Cable
a.) UTP Cable b.) Fiber - Optic c.) Coaxial cable d.) Elastic cable

5. Is a type of Ethernet cable used to connect computing devices together directly? It is most
often used to connect two devices of the same type: e.g. two computers
(via network interface controller) or two switches to each other.
a.) cross over cable b.) Straight through cable c.) Coaxial cable d.) Elastic cable

6. A type of twisted pair copper wire cable for local area network (LAN) use for which the RJ-
45 connectors at each end have the same pin out.
a.) Straight through cable b.) Cross -over cable c.) Coaxial cable d.) Elastic cable

7. It automatically allows your networking device to assign a dynamic IP address to your


computer.
a.) Obtain IP Address b.) Use the ff. IP Address c.) Internet protocol d.) DNS

8. Is a networking device that forwards data packets between computer networks and
perform the traffic directing functions on the internet?
a.) Router b.) Modem c.) Switch hub d.) Patch panel

9. Is a computer networking device that connects devices together on a computer network, by


using packet switching to receive, process and forward data to the destination device.
a.) Router b.) Modem c.) Switch hub d.) Patch panel

10. A facility allowing computers, smartphones, or other devices to connect to the Internet or
communicate with one another wirelessly within a particular area.
a.) Wi-Fi b.) Local Area Network c.) Wide Area Network d.) Private Area Network

11. Its a way that users redirect the path of a folder to a new location on the local computer or a
directory on a network file share.
a.) Folder Redirection b.) Remote desktop c.) VMWare d.) Private Area Network

12. Is a proprietary protocol developed by Microsoft, which provides a user with a graphical interface to
connect to another computer over a network connection? Remote Desktop
a.) Remote desktop b.) Folder Redirection c.) VMWare d.) Private Area Network

13. Are the Internet's equivalent of a phone book they maintain a directory of domain names and
translate them to Internet Protocol (IP) addresses?
a.) Domain Name Server b.) DHCP c.) AD DS d.) Private Area Network
14. Is a network protocol that enables a server to automatically assign an IP address to a computer
from a defined range of numbers?
a.) Domain Name Server b.) DHCP c.) AD DS d.) Private Area Network

15. Is a server role in Active Directory that allows admins to manage and store information about
resources from a network, as well as application data, in a distributed database?
a.) Domain Name Server b.) DHCP c.) AD DS d.) Private Area Network

Test II
16- 20 Kindly draw the straight through and the cross over cable with colour coding.
21- 30 write the procedure or the steps of installing windows (10)/ Server.
31- 40 it must from the beginning (write the procedure or steps for the router configuration).

Direction: Fill each blank with the correct answer.

1. _____________ The major operations performed by the ALU are addition, subtraction,
multiplications division, logic and comparison.
2. _____________ Computer is used to store data and instructions.
3. _____________ This is the process of producing results from the data for getting information.
4. _____________Device that transforms data into meaningful information.
5. _____________ Is an electro - mechanical, hand-held device use to select menu or command.

6. _____________This is the process of entering data and programs into the computer system.
7. _____________ The process of input, output, processing and storage is performed under the
supervision of a unit.
SENIOR HIGH SCHOOL DEPARTMENTAL EXAM
3rd Grading Period (March 02, 2017)
Subject Code: SHMAJORICT Description: Computer System Servicing Teacher: MR. JEFERSON BUAYA

Name of Student: ___________________________________ Level & Section: ___________________

Score: ______________ Status: __________________ Recommendation: ________________________


8. ______________An input device that utilizes a light-sensitive detector to select objects on a
display screen.

9.______________These devices are used for automatic data collection.

10. _____________ A sets of programs, responsible for running the computer, controlling various
operations of computer.

Test II. Multiple Choice:


Direction: Encircle the letter of the correct answer.
11. Is system software that provides an interface for a user to communicate with the computer.
a.) System Software b.) OS c.) Utilities d.) Application Software

12. These are programs that bridge the gap between the functionality of an OS
and the needs of users.
a.) System Software b.) OS c.) Utilities d.) Application Software

13. Is a set of programs, which are written to perform specific tasks.

a.) System Software b.) OS c.) Utilities d.) Application Software


14. A printed circuit board containing the principal components of a computer or other device, with
connectors into which other circuit boards can be slotted.

a.) Printed circuit board b.) Ram c.) Motherboard d.) Video card

15.Is the place in a computing device where the operating system, application program and data
in current use to kept so they can be quickly reached by the processor?
a.) Printed circuit board b.) Ram c.) Motherboard d.) Video card

16. Is an internal hardware component that supplies components in a computer with power.
a.) Power Supply b.) Ram c.) Motherboard d.) Video card

17. A rigid non removable magnetic disk with a large data storage capacity.
a.) Power Supply b.) CD -ROM c.) San disk d.) Hard disk

18. A compact disc used as a read-only optical memory device for a computer system.
a.) Power Supply b.) CD -ROM c.) San disk d.) Hard disk

19. Is the logic circuitry that responds to and processes the basic instruction that drive a computer
also known as the brain of the computer.
a.) Input b.) Memory Unit c.) ALU d.) CPU

20. The main function of this output device is used to display the video and graphical information
generated by the computers graphics adapter.

a.) Mouse b.) Keyboard c.) Scanner d.) Monitor

Test II. Enumeration:


1. 10. Give at least ten parts of the motherboard.
11- 20. Give the list of the (OHS) Occupational Health and Safety of CSS.

Das könnte Ihnen auch gefallen