Beruflich Dokumente
Kultur Dokumente
3a of API 650
API 650 Material Group I
Thickness 6 mm to 13 mm Thickness 14 mm to 20 mm
-12.002 6 -5.579 14
-10.574 8 -4.162 15
-9.146 10 -2.745 16
-7.718 12 0.089 18
-7.004 13 2.923 20
Group I ,
AS Rolled,
Material must be as rolled & semi-killed
Semi-Killed
Material Notes
A36M 3
Thickness 6 mm to 13 mm Thickness 14 mm to 40 mm
-28.006 6 -22.318 14
-26.738 8 -21.075 15
-25.47 10 -19.832 16
-24.202 12 -17.346 18
-23.568 13 -14.86 20
-12.374 22
-9.888 24
-8.645 25
Group II,
AS Rolled, Material must be as rolled, killed or semi-killed
Killed or Semi-Killed
Material Notes
A36M 5
Applicable Note 5 :
Manganese content shall be 0.80 % to 1.2 % by heat analysis for thicknesses greater than 20 mm, except
that for each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 %
manganese above the specified maximum will be permitted up to the maximum of 1.35 %. Thicknesses
20 mm shall have a manganese content of 0.80 % to 1.2 % by heat analysis.