Sie sind auf Seite 1von 26

SBP, MURTHAL BRANCH

BOQ FOR INTERIOR AND FURNISHING WORK OF STATE BANK OF


PATIALA, AT MURTHAL,HARYANA.

( 1 ) CIVIL WORKS
S.NO DESCRIPTION OF ITEMS QTY UNIT RATE AMOUNT

1.1) 41/2 brick wall work :-- 6.8 sq.m


Providing and laying 41/2 brick masonry with bricks
of class 75 with cement mortar 1:3,[ 1 cement : 3
coarse sand] , both sides plastered, plastering to be
included.
1.2) p & f Ceramic tiles [wall]- 7.0 sq.m
st
Providing and fixing 1 quality ceramic
glazed tiles confirming IS:13753 of minimum
thickness 4mm of approved make like Kajaria,
or equiv. Make in colour, shades except
burgundy, bottle green Black, of size 12x24,
for dado, in light colors, pastel shades, Over
12mm thick bed of cement mortar1:3, ( 1
cement:3 coarse sand)And jointed with grey
cement slurry@ 3.3 kg per sqm including
pointing white cement mixed with pigment of
matching pigments etc,complete. tiles,brand-
Kajaria, basic price of tile to be used=Rs600/-
per sqm, cream colour ,tile, Brand Kajaria.

Total Civilwork=Rs

1|P age
2

2.0]PAINTING-
S.NO DESCRIPTION OF ITEMS QTY UNIT RATE AMOUNT

2.1)POP Punning-Providing & laying 64 sq.m


Punning on walls with plaster of paris to required thickness[
thickness of POP =6MM] to mend flaws , Alignment , angles ,
corners & edges , the existing ceiling tiles having holes in them
be filled with POP, so as to obtain a smooth finish. finished
surface to be smooth and the item includes pads or scaffolding
etc. complete in all respect to the satisfaction of Architect /
Engineer .

(2.2)Plastic Emulsion Paint


Painting two or more coats with Plastic Emulsion 64 sq.m
Paint of approved quality, brand and manufacture to give an
even shade including putty and priming coat. Surface to
be cleaned , sanded, levelled and repaired. on old and new
work. Etc complete in all respect to the satisfaction of Architect /
Banks Engineer Brands- as per approved list.

(2.3) Snowcem cement Paint 45 sq.m


Snowcem Paint[ Cement based] of approved color and
manufacture to give an even shade including putty and priming
coat with proper curing time. Surface to be sand paper cleaned
and repaired, on old & new work. Etc complete in all respect to
the satisfaction of Architect / Banks Engineer .

(2.4) Synthetic Enamel Paint 45 sq.m


Painting two or more coats with Synthetic Enamel Paint of
approved brand and manufacture to give an even shade
including putty and priming coat . Surface to be sand paper
cleaned and repaired ,on old & new work Etc, to be applied on
grills and rolling shutter. complete in all respect to the
satisfaction of Architect / Banks Engineer.

(2.5) Texture Paint 27.34 sq.m


Providing texture surface coating on walls of approved shade
and texture(Heritage flakes). The rates are inclusive of
scaffolding staging etc. for any height and for plane as well as for
Architectural surface. All complete as per approval & instruction
of the Bank/Architect. ( Basic price of texture paint= Rs20 -25/
sqm
Total of Painting / POP work = Rs
3

S.NO DESCRIPTION OF ITEMS QTY UNIT RATE AMOUNT

( 3) PARTITION

(3.1) (FULL HEIGHT PARTITION, 9ht ), 50.00 sq.m


(Door inclusive-29x7-0) Providing & Fixing partially
glazed partition of (60mm X 60mm) kail wood frame work
treated fire retardant & anti termite paint spacing not
exceeding 0.6m C/C horizontally as well as vertically ( joint
less vertical member).Bottom of the frame work to seemed
to the floor & slab with concealed hardware & screws &
adhesive, wherever necessary, frame to be sandwiched in
bet 6 mm commercial ply & finished with 1.0 mm thick
laminate from both sides. All exposed faces to be finished
with Steembeechwood beading & all wooden surfaces to be
finished. with lacquer polish, of approved shade, float glass
6 mm thick not larger than 1.2m in width shall be fixed with
Steembeechwood beading 12.5mmx12.5mm .The item will
also include providing Steembeechwood frame of size
75mmx38mmfor chaukhat of door, wherever necessary.
complete. & to the satisfaction of Engineer/ Architect. Rate
includes design & grooves in laminates, provision for extra
frame work as & where necessary for skirting and making
cutout for switch plate, switch boxes, light fittings etc.
making provision for laying conduits . full height partition will
be measured from finish Floor level to the bottom of false
ceiling. [Note :- for UPS/Battery room only, instead of 6mm
ply,6mm cement board of approved make shall be used,and
instead of laminate,shall be painted with cement paint-2-3
coats]

(3.2)a](FULL Ht. PARTITION,12 mm toughned glass) 10.56 sq.m


P/f Full height partition with 12mm thick toughened glass,( Saint
Gobain, Modi Guard, Asahi.) complete, with patch fittings. Include
cost of glass in this item and S.S. Connectors[any number ]-
glass to glass, glass to floor /ceiling cost to include in above
mentioned item.Glass to be toughned, polished and grinded
properly.The item to be inclusive of proving, fixing and necessary
wastage. Glass shall be measured as per actual size.
Brand of glass- Saint Gobain,/ Modi Guard/ Asahi.

(3.2)b]( Providing & fixing frameless,12 mm toughned glass) 2.3 sq.m


doors[ single & double shutter], without frame, moving on
double action hydraulic heavy duty floor springs &
Pivot on top including cutting, embedding the floor springs
along with S.S. cover plate etc.The item includes handle of
600mm long with complete patch fittings , door lock etc,
complete to the satisfaction of Bank/ Architect[ Fittings-
Dorma/ Hettich/ Ozone.]
4

S.NO DESCRIPTION OF ITEMS QTY UNIT RATE AMOUNT

(3.3) (7-0) HEIGHT PARTITION, NEW ), 18 sq.m


(Door inclusive-26x66) Providing & Fixing partially
glazed partition in Managers Cabin, Server Room, of
(60mm X 60mm) kail wood frame work treated fire
retardant & anti termite paint spacing not exceeding 0.6m
C/C horizontally as well as vertically ( joint less vertical
member).Bottom of the frame work to seemed to the floor &
slab with concealed hardware & screws & adhesive,
wherever necessary, frame to be sandwiched in bet 12 mm
commercial ply & finished with 1.0 mm thick laminate from
both sides. All exposed faces to be finished with
Steembeechwood beading & all wooden surfaces to be
finished. with lacquer polish, of approved shade, float glass
12 mm thick not larger than 1.2m in width shall be fixed
with Steembeechwood beading 12.5mmx12.5mm .The item
will also include providing Steembeechwood frame of size
75mmx38mmfor chaukhat of door, wherever necessary.
complete as per drg. & to the satisfaction of Engineer/
Architect. Rate includes design & grooves in laminates,
provision for extra frame work as & where necessary for
skirting and making cutout for switch plate, switch boxes,
light fittings etc. making provision for laying conduits . full
height partition will be measured from finish Floor level to
the bottom of false ceiling.

(3.4) LOW HEIGHT PARTITION (2-0), 1.67 sq.m


with 12mmglass . P & F low height partition to be made up of
(60mm X 60mm) kail wood framing treated against termite and
fire retardant paint of approved make 6 mm ply to be fixed on the
frame of dist 2 X 2 max horizontally & vertically (joint less vertical
member), ply to finished with 1.0mm thk laminate from both sides,
the item includes grouting kail wood frame member in floor
hardware adhesive, with 12mm thickness float glass, 1-6 height
to be at top of each partition fixing of S.S hard ware where ever
necessary, exposed wood surface to be finished with lacquer
polish etc complete in all respect to the satisfaction of
engineer/architect.& Steembeechwood coping 75mm x 38mm
finished with lacquer polish & fix with screws in partition, includes
grouting hard wood frame members in floor, hardware,
adhesive/polishing /painting etc. Total partition thickness = 75mm
[3 ] complete in all respect to the satisfaction of engineer /
Architects./Bank. Item to include acid etching on glass as per
design.
5

(3.5) LOW HEIGHT PARTITION (4-6), with 12mm glass 6.6 sq.m
P & F low height partition as per design, to be made up of (60mm
X 60mm) kail wood framing treated against termite and fire
retardant paint of approved make 6 mm ply to be fixed on the
frame of dist 2 X 2 max horizontally & vertically (joint less vertical
member), ply to finished with 1.0mm thk laminate from both sides,
the item includes grouting kail wood frame member in floor
hardware adhesive, with 12mm thickness float glass, 1 height to
be at top of each partition fixing of S.S hard ware where ever
necessary, exposed wood surface to be finished with lacquer
polish etc complete in all respect to the satisfaction of
engineer/architect.& Steembeechwood coping 75mm x 38mm
finished with lacquer polish & fix with screws in partition, includes
grouting hard wood frame members in floor, hardware,
adhesive/polishing /painting etc. Total partition thickness = 75mm
[3 ] complete in all respect to the satisfaction of engineer /
Architects. Item to include acid etching on glass as per design.

(3.6) FLUSH DOOR 7.81 sq.m


P & F 38mm thk phenol bonded solid core flush door with Both
sides of laminated shutters of core of Block board as per I.S.
1959-1969 confirming to I.S.with C.P.W.D. 1977 Specification
9.8.1 with 12mm x 38mm Along perimeter 1mm thk laminate of
approved make & Colour & shade to be fixed on both sides of
shutter, laminate To be in one piece with out joints or broken
edges including Providing all stainless steel hardware, 4 nos
12mm heavy duty hinges , 1 no 230mm tower bolt , concealed
modular type hydraulic door closer , exposed wood work to be
finished with item to be lacquer polish on anti termite & fire
retardant paint completed in all respect to the satisfaction of
Architect / Engineer.The item includes providing & fixing of
chaukhats made from 100mmx 50mm teakwood members.

(3.7) Panelling[wooden] 111 sq.m


Providing & fixing Panelling on existing walls as per design &
drawing with sub- frame of size 38mm x50mm kail wood @
500mm x 500mm c/c vertically & horizontally, treated with anti
termite and fire retardent paint. The frame to be fixed in walls with
screws and wooden gutties. The panelling made of 6mm thick
commercial plywood, finished with 1mm thick laminate.
Rates to include necessary notches in frame on carrying electrical
conduit and switch boxes. It includes design & grooves in
laminate as directed by Architect/Bank, includes providing
Steembeechwood moulding, lacquer polish on top of low height
panelling wherever necessary etc, complete in all respect to the
satisfaction of Architect/ Engineer.

Total Partition work= Rs


6

(4)Furniture

4.0)SWO counter 5.6 m


SWO to be made of 18mm thick comm. Board finished with 1.0mm top
Bavarian beech laminate machine cut, rounded edge-post forming
lamination & having cutout for wire manager 75mm dia. & 1.0 mm thick
laminate on sides with Rehau, Edge banding tape, as per design &drawing.
Counter consisting of 2 drawers of 120mm width & filing cabinet. Drawer
made of 12mm thick plywood sides and 6mm ply base.Exposed edges of
drawers to be finished with Rehau edge banding tape,of approved color.
Make Drawer unit on right side made of 19mm thick comm. Board and
finished with 1.0mm laminate of approved shade and colour. inside of
drawers finished with 1.0 mm laminates. Drawers slides on Earl Bihari sliding
channel with lock handle stainless steel hardwares of approved make. All
exposes edges of board and ply finished with Rehau edge banding tape.
Item inclusive of painting complete with all stainless steel hardware and
fitting. Keyboard drawer, 1mm thick laminate finished, fixed on Earl Bihari
channels, platform for C.P.U. made of 19mm commercial board on left side
Steembeechwood foot rest, size40mmx90mm to be fixed in between of
C.P.U. platform & drawer unit. Item to be completed in all respect with 75mm
dia powder coated wire manager as per drawing. Complete in all respect to
the satisfaction of Architect / Engineer. Counter length-5.6M, height=0.76M

4.1)Grahak Mitra counter 1.8 m


Grahak Mitra Counter [curved]to be made of 18mm thick comm. Board
finished with 1.0mm Bavarian beech laminate machine cut, rounded edge-
post forming lamination & having cutout for wire manager 75mm dia. & 1.0
mm thick laminate on sides with Rehau, Edge banding tape, as per design
&drawing. Counter consisting of 2 drawers of 120mm width & filing cabinet.
Drawer made of 12mm thick plywood sides and 6mm ply base.Exposed
edges of drawers to be finished with Rehau edge banding tape,of approved
color. Make Drawer unit on right side made of 19mm thick comm. Board and
finished with 1.0mm laminate of approved shade and colour. inside of
drawers finished with 1.0 mm laminates. Drawers slides on Earl Bihari sliding
channel with lock handle stainless steel hardwares of approved make. All
exposes edges of board and ply finished with Rehau edge banding tape.
Item inclusive of painting complete with all stainless steel hardware and
fitting. Keyboard drawer, 1mm thick laminate finished, fixed on Earl Bihari
channels, platform for C.P.U. made of 19mm commercial board on left side
Steembeechwood foot rest, size40mmx90mm to be fixed in between of
C.P.U. platform & drawer unit. Item to be completed in all respect with 75mm
dia powder coated wire manager as per drawing. Complete in all respect to
the satisfaction of Architect / Engineer. Counter length-1.8m, height=0.76m

4.2)server counter 2.0 m


Server counter to be made of 19mm thick comm. Board finished with
Bavarian beech laminate 1.0 mm thick laminate sheet,on top as per
approved shade and brand, & having cutout for wire manager 75mm dia. &
1.0 mm thick laminate on sides with Steembeechwood molding 15mm
x45mm, lacquer polish as per design &drawing. Counter consisting of 2
drawers of 120mm width & filing cabinet. Drawer made of 12mm thick
plywood sides and 6mm ply base. Drawer unit on right side made of 19mm
thick comm. Board and finished with 1.0mm laminate of approved shade and
colour. inside of drawers finished with 1.0 mm laminates. Drawers slides on
7

sliding channel with lock handle stainless steel hardwares of approved make.
All exposes edges of board and ply finished with 3mm thick
Steembeechwood beading. Item inclusive of painting complete with all
stainless steel hardware and fitting.
Keyboard drawer, 1mm thick laminate finished, fixed on Earl Bihari channels,
platform for C.P.U. made of 19mm commercial board on left side &
Steembeechwood foot rest, size38mmx90mm to be fixed in between of
C.P.U. platform & drawer unit. Item to be completed in all respect with 75mm
dia powder coated wire manager as per drawing. Complete in all respect to
the satisfaction of Architect / Engineer.
Size: Work Top-1.3mx 0.6m. Ht :- 0.76m.

4.3) Cash Counter ( 4 wide ) 2.7 m


Counter worktop finished with 19mm tk commercial board finished with
1.5mm thick laminate and front fascia finished with 1mm thick laminate over
12mm thick ply & only customer top finished with 18mm thick Jed Black
Granite, machine cut, rounded edges mirror polished over 19mm thick
commercial Board. Worktop finished with1.5mm thk laminate of approved
shade, with rounded edges and front fascia with 1.0 mm thick laminate and
Steembeechwood moulding as per design + drawing. Counter to incorporate
drawer unit, consisting of 2 nos 120 mm high and 1 no. Filing drawers for
clerical counter & to be divided as per various currency denominations for
Cashier & be fixed on right side of the table. Drawers made from
12mmx120mm plywood sides 19mm thick comm. Board front and 6mm thick
comm. Ply base provided under table top between drawer and side unit.
Front and exposed side finished with 1.5mm thick laminate as per drawing.
All internal surfaces of drawers to be enamel painted . All drawers to be
mounted on roller channels fixed on sides. Edges of the board to have 3mm
thick Steembeechwood lipping. Finished with Duco paint.
Drawer units to have one key locking filing system. Item to be completed in
all respects including all necessary Stainless steel hardware such as
stainless steel hinges, side of drawer unit of size. Tray for computer
keyboard made from 19mm thick comm. board with 12mm thick comm. Ply
wood vertical sides. Inside of tray finished with 1.0 mm thick laminate tray
fixed on roller channels with lockable folding front fascia. Magnetic catchers
between fascia and side.19mmx19mm Steembeechwood molding as per
design in front. Item to be completed in all respects including all necessary
stainless steel
hardware.75mm dia powder coated wire manager fixed on work counters.
Steembeechwood footrest, size-38mmx90mm, C.P.U. stand made of
19mm comm. Board finished with laminated sheet all complete.Mirror 5mm,
modi float, on inner side of counter, facing cashier, extending to full counter
length. [Basic rate of cat eye granite- Rs 3000/- sq.m]
Size:
Worktop: 1.3m x0.68m(w)x0.75m(h)
Customer top :1.3mx0.30mx 1.12m (h)
Drawer unit: 0.45mx 0.45m(w)x0.75m(h)

4.4) SLIP COUNTER 2 no


P/F in position writing Desk as per design of overall size made out of 19 mm
thk block board. The top shall be of 12 mm plate glass, shelf & shutter below
shall be finished with 1.5 mm thk laminate of approved makes,shade &
colour. All woodwork shall have Duco finish and all hardware in stainless
steel. complete in all respect to the satisfaction of Architects / Engineer. [
Size-0.9mx0.45mx1.15m height]
8

(4.5)Lunch Table 1 no
P & F in position LunchTable, it consists of
The i) table top to be made of 19mm thick commercial board & finished with
1.5mm thick laminate , finished with steembeechwood leaping 10mm
thickness. Tables finished with 1.5mm thick laminate of approved shade & to
be made up of 19mm commercial board & finished with & exposed faces with
10mm thk Steembeechwood Beading finished with lacquer. The finishing of
table should be smooth finish,with lacquer polish of 2-3 coats to get desired
smooth effect. The wood should be free from knots. Table top supported
on Steembeechwood frame size -55mmx75mm .
Worktop : size 3-0 x 6-0,
Ht=0.76m

(4.6) Corner Table 2 no


P & F in position corner table of size 0.45m x 0.45m,made up of
steembeachwood frame of 450 x 450mm size,polished
with 2-3 coats of lacquer polish and table top to be of 12mm thick toughened
glass with beveled edge, all round supported on steembeachwood frame.The
finishing of table should be smooth finish,with lacquer polish of 2-3 coats to
get desired smooth effect. The wood should be free from knots.

(4.7)Officers Table with side unit. 4 no


P & F in position OfficersTable, it consists of
The i) table top to be made of 19mm thick commercial board &
finished with 1.0mm thick laminate , finished with steembeechwood
leaping 10mm thickness, provided with 75mm dia wire manager to
be provided as per design. Modesty panel & side of Tables finished
with 1mm thick laminate of approved shade & to be made up of
19mm commercial board & finished with & exposed faces with 10mm
thk Steembeechwood Beading finished with lacquer polish. Drawers
made from (12mm x 120 mm high) plywood 19mm thick comm.
Board front & 6mm thick commercial ply base. All internal surfaces of
drawers to be painted inside with synthetic enamel paint. 19mm x
25mm Steembeechwood members between drawers. All drawers to
be mounted on roller channels fixed on sides. Edges of board to
have 3mm thick Steembeechwood lipping. Side unit, top made from
19mm thick laminated comm. Board with Steembeechwood lipping
along with laminate in front.19mm thick one side laminated / teak
board for sides & 6mm thick commercial ply rear.(iii) Side unit to
extend inside table, incorporates Steembeechwood foot rest- size
38mmx75mm & tray for keyboard and fixed on Earl Bihari channels.
Items to be completed in all respect including Duco paint all
complete as per design drawing.All hardware in stainless steel.Size :
Table size:-Worktop : 46x23,ht=26
Drawer Unit : Side table 3x16,ht=26 with separate lock in
each drawer.

(4.8)Officers Table without side units. 3 no


P & F in position OfficersTable, it consists of
The i) table top to be made of 19mm thick commercial board &
finished with 1.0mm thick laminate , finished with steembeechwood
leaping 10mm thickness, provided with 75mm dia wire manager to
be provided as per design. Modesty panel & side of Tables finished
with 1mm thick laminate of approved shade & to be made up of
19mm commercial board & finished with & exposed faces with 10mm
9

thk Steembeechwood Beading finished with lacquer polish. Drawers


made from (12mm x 120 mm high) plywood 19mm thick comm.
Board front & 6mm thick commercial ply base. All internal surfaces of
drawers to be enamel painted. 19mm x 25mm Steembeechwood
members between drawers. All drawers to be mounted on roller
channels fixed on sides. Edges of board to have 3mm thick
Steembeechwood lipping. Side unit, top made from 19mm thick
laminated comm. Board with Steembeechwood lipping along with
laminate in front.19mm thick one side laminated / teak board for
sides & 6mm thick commercial ply rear.(iii) Side unit to extend inside
table, incorporates Steembeechwood foot rest- size 38mmx75mm &
tray for keyboard and fixed on Earl Bihari channels. Items to be
completed in all respect including Duco paint all complete as per
design drawing.All hardware in stainless steel.Size :
Table size:- Table size:-Worktop : 46x23,ht=26
Drawer Unit : 3 drawer umit,with separate lock in each
drawer.

(4.8)Managers Table with side units. 1 no


P & F in position ManagersTable, it consists of
The i) table top to be made of 19mm thick commercial board &
finished with 1.5mm thick laminate of approved make finished with
steembeechwood leaping 10mm thickness, provided with 75mm dia
wire manager to be provided as per dwg. Modesty panel & side of
Tables finished with 1mm thick laminate of approved shade & to be
made up of 19mm commercial board & finished with & exposed
faces with 10mm thk Steembeechwood Beading finished with
lacquer polish. Drawers made from (12mm x 120 mm high) plywood
19mm thick comm. Board front & 6mm thick commercial ply base. All
internal surfaces of drawers to be laminated with 1.0 mm thick
laminate. 19mm x 25mm Steembeechwood members between
drawers. All drawers to be mounted on roller channels fixed on sides.
Edges of board to have 3mm thick Steembeechwood lipping. Side
unit, top made from 19mm thick laminated comm. Board with
Steembeechwood lipping along with laminate in front.19mm thick
one side laminated / teak board for sides & 6mm thick commercial
ply rear.(iii) Side unit to extend inside table, incorporates
Steembeechwood foot rest- size 38mmx75mm & tray for keyboard
and fixed on Earl Bihari channels. Items to be completed in all
respect including Duco paint all complete as per design drawing.All
hardware in stainless steel.Size : Worktop : 6-0x3-0
Drawer Unit : Side table 3-0x16
Ht=26

(4.6) Centre Table 1 no


P & F in position corner table of size 1.2m x 0.6m,made up of
steembeachwood frame of 450 x 450mm size,polished
with 2-3 coats of lacquer polish and table top to be of 12mm thick toughened
glass with beveled edge, all round supported on steembeachwood frame.The
finishing of table should be smooth finish,with lacquer polish of 2-3 coats to
get desired smooth effect. The wood should be free from knots.

Total of furniture work Rs


10

(5) CASEWORK

(5.1) Low Height Cabinets.


Providing and fixing in position storage cupboards made of
19mm thick commercial board with intermediate shelves. All
exposed edges of the board to becovered with first class
Steembeechwood leaping & to be finished with lacquer polish.
All internal surfaces of the cup-boards to be finished with
synthetic enamel paint. The shutters of the cabinets to be
made of 19mm thick commercial board & finished with 1.5mm
thick laminate. The rate to include providing and fixing of 3
Stainless steel handles, knobs, locking arrangements,
magnetic ball catchers, Stainless-steel tower bolts etc. All
hardware in stainless steel of approved make.
0.45m deep.13.2 sqm

(5.2) Full Height Cabinets.


Providing and fixing in position storage cupboards made of
19mm thick commercial board with intermediate shelves as
shown in the drawing. All exposed edges of the board to
becovered with first class Steembeechwood leaping & to be
finished with lacquer polish. All internal surfaces of the cup-
boards to be finished with synthetic enamel paint. The shutters
of the cabinets to be made of 19mm thick commercial board &
finished with 1.5mm thick laminate. The rate to include
providing and fixing of 3 Stainless steel handles, knobs,
locking arrangements, magnetic ball catchers, Stainless-steel
tower bolts etc. All hardware in stainless steel of approved
make.

0.45m deep.19 sqm

Total of Casework Rs
11

S.NO DESCRIPTION OF ITEMS QTY UNIT RATE AMOUNT


6) FALSE CEILING
(6.1) Gypsum Board false ceiling. 118 sq.m
Providing and fixing in position Gypsum Board false ceiling suspended on
G.I. Frame work consisting of: - Perimeter channel of size 27mmx 0.5mm with
flanges of 20mm and 30mm screwed & fixed to brick wall or partition wall as
the case may be. Intermediate channels of size 45mm x0.5mm with flangesof
15mm each suspended from existing ceiling of with steel hangers of width
25mmx 0.5mm thick fixed with dash fasteners. Spacing of intermediate
channels not greater than 600mmc/c.
Ceiling section of 0.5mm thickness having knurled edge of 51.5mm and two
flanges of 26mm each with lips of 10.5mm fixed to intermediate channel with
the help of connecting clips and in direction perpendicular to the intermediate
channel with the help of connecting clips and in direction perpendicular to the
intermediate channel at 450c/c, 12.5mm thick tapered edge gypsum plaster
board (Confirming to IS 2095 of 1982, Gypboard) screwed, the tapered and
square edges of the boards to be jointed and finished with requisite filler,
paper tape, finisher and primer suitable for gypsum plaster board to give a
smooth and even finish.
(All above as per the recommendations of India Gypsum Limited.) Finishing
false ceiling with two or more coats of plastic emulsion paint (super white
color) to give an even shade. However the rate to include making necessary
cut outs/ openings for light fittings. These cut outs to have perimeter channel
of size 0.5mm all round and supported suitably.Item to include necessary
modifications with respect to existing false ceiling, with respect to various level
changes, as per design or as per A/c grill positioning. False ceiling to be
measured in plan only. Ht of ceiling from f.f.l. = 86 ht.

(6.2)2x2 grid,mineral fibre false ceiling. 82.5 sq.m


Nittobo/Armstrong false ceiling tiles, 2' x2':-Thickness of tile-
15 mm; NRC 0.6 TEGULAR EDGES
Ceiling tiles shall be NITTOBO SOLATON GINGA X tra
White/Armstrong Square / TEGULAR Bevelled edge mineral fiber
acoustic ceiling in size 600x600x15mm having noise reduction co-
efficient of 0.60, CAC of 43db, Light reflection of over 85%, Density of
3
350 kg / / m , Thermal resistance RC = 0.28m2.K/W or K value =
0.053 and Humidity resistance of 95% and modulus of rupture of 266N
to be laid on UNILOCK exposed grid system.
Installation:-To comprise main runners spaced at 1200mm centres
securely fixed to the structure by the means of a metal rawl plug
having a min. dia of 8mm, & suspending a GI wire of 4mm dia through
a L shaped soffit cleat using a level adjusting clip.
Flush fitting 1200mm cross tees to be interlocked between main
runners at 600mm centres to form 1200 x 600 modules. 600 x 600
modules to be formed by fitting 600mm long cross tees centrally
between 1200mm cross tee. Wall angle to be secured to the wall at
450mm maximum centre. Ht of ceiling from f.f.l. = 90 ht.
Total of False Ceiling work =Rs
12

S.NO DESCRIPTION OF ITEMS QTY UNIT RATE AMOUNT


( 7) MISCELLANEOUS

(7.1) Roller Blind - 5.59 sq.m


P/f roller blind of standard aluminium section,
Of TRAC/MAC of cloth to be decided as per
Bank/ Architect.[ Rate of fabric- Rs800/- per sq.m]

7.2] Miror in toilet, with bevelled edges 2 nos


Providing & fixing 5mm thick mirror, copper back finish, of required
size over steembeech wood frame made out of 25 x 50mm fixing
with rowel plug,/stainess steel flat screws & hexagonal cap nut,
frame to be melamine polished. Mirror edge shall be smooth, mirror
size 0.45m x 0.45m.

7.3]Stainless steel indicator- 2 nos


Providing & fixing stainless steel AISI 316 Grade sign plates
depicting male, female symbol to be used on toilet door, as per the
direction of Bank/Architect.

7.4] Providing/ fixing soft board 3 sqm


With fabric encasing of color as approved by Architect/ bank, with
backing of 6 mm thick ply with 1 x thick steembeech wood
moulding on outer periphery.with plastic film on top to protect from
dust etc. The moulding be finished with polish as approved.

7.5] Providing/fixing glass film etching design 10 sq.m


Glass etching film, with computer cut design depecting Banks logo,
along with alphabetical letters,or other computer cut design, as given by
Architect / Engineer incharge.FILM MAKE- Birla 3M., sparkle

7.6) Aluminium composite panelling:-- 36.1 sq.m


Aluminium composite panelling:-Providing & fixing Aluminium
composite paneling in standard aluminum frame as per manufacturers
specifications, Aluminium sections of Jindal of standard sections and
frame as per manufacturers specifications, Aluminium sections of Jindal
of standard sections to be used.
Aluminium composite panel specifications:-

Panel-AL-45,Thickness-4mm, width 1220mm, length-3660mm, foil


thickness-0.50mm, Surface coating-PVDF, Application- Interior.Brand
Alucobond/ Alstone.[ note:-color of exterior grade ACP sheet shall be
decided by bank/Architect.
7.7] Providing/ fixing planter box with artificial plants 3 no
Providing and fixing in position planter box with artificial plants .Box
to be made of 19mm thick commercial board with necessary
grooves.and finished from outer sides with 1 mm thick laminate of
approved shade/color. All exposed edges of the board to becovered
with Rehau edge banding tape leaping & to be finished with lacquer
polish. All internal surfaces of the box to be finished with synthetic
enamel paint, of 2-3 coats as needed be.
Planter box size- 0.45m x 0.45m, ht=0.40m
Basic price of plant= Rs800/-
13

S.NO DESCRIPTION OF ITEMS QTY UNIT RATE AMOUNT

7.8] Providing/ fixing 3 seater beam seating 4 no


Providing/ fixing in position 3 seater beam
seating,chromium plated,metal frame. Brand-
Geeken/ Supereq-MODEL Spacio,chrome

7.9] Providing/ fixing 3 seater sofa 2 no


Providing/ fixing in position 3 seater sofa,,Sofa frame to
comprise of hollockwood frame structure,of adequate &
appropriate size with seat of 100mm thk rubber covered with
25mm foam,32 density and finished in Fabric of approved
shade. Item includes Flat springs for cushioning to be placed
at placing not more than 75mm c/c, Quality markings all
around the seat, back and sides as required, All necessary
hardware, Stitching, provisions for contours, slopes etc
complete. treated wood with termite proofing coating,
Back rest,sides or arm rest to be adequately cushioned,
upholstery shall be Fabric of approved thickness and
color.The item to be complete in all respect. to the
satisfaction of Architect/ Engineer incharge.The sofa shall be
covered from all sides by Fabric [ rear,front ,sides
backrest,seats-fully covered by Fabric.
Basic Rate of Fabric 350/- per metre.

7.11]a] Providing manager chair 1 no


Providing/ fixing high back manager chair with ,Nylon
Pedestal,Gas lift,pp seat,back cover.Soft touch P.U.Armrest.
Brands- Godrej/Durian
7.11]b] Providing officer chair 10 no
Providing/ fixing medium back,gas lift, chair, thick
cushion,back cover,Nylon Pedestal,Soft touch P.U.Armrest.
Brands- Godrej/Durian
7.11]c] Providing visitor chair 15 no
Providing/ fixing visitor chair without armrest, thick cusion,
back cover,Nylon Pedestal, Brands- Godrej/Durian
Total of Miscellaneous work= Rs

GrandTotal cost= Rs
14

Interior Decoration Works Furnishing, For State Bank of Patiala at


Murthal,Haryana.
SUMMARY

1. CIVIL WORK Rs.

2. PAINTING Rs.

3. PARTITIONS Rs

4. FURNITURE WORKS Rs

5. CASE WORK Rs

6. FALSE CEILING WORK Rs

7. MISCELLANEOUS Rs

TOTAL OF ITEMS 1 TO 7 Rs

GRAND TOTAL OF FURNISHING = Rs-


15

SUMMARY OF COST
FOR ELECTRICAL, FIRE ALARM AND
AIRCONDITIONING ITEMS AT
SBP,Murthal Branch HARYANA.

Sub
Head Description Amount

I :-INTERNAL WIRING

II :-LIGHTING FIXTURE & FANS

III :-WIRING FOR TELEPHONE

IV :-DISTRIBUTION BOARD & PANEL

V :-DATA CABLING SYSTEM

VI :-EARTHING

VII :-MUSIC SYSTEM

VIII
:- FIRE ALARM

IX :- AIRCONDITIONING

:-TOTAL
16

B.O.Q. FOR INTERNAL INSTALLATION ELECTRICAL WORKS


FOR SBP,Murthal,Haryana

S.NO DESCRIPTION OF ITEM UNIT QTY Rate Amount

SUB-HEAD I: INTERNAL WIRING


1 Wiring for light, fan, call bell and 5A plug point with 2x1.5
sq.mm.F.R.L.S., PVC insulated copper conductor cable
in recessed / surface MS conduit 16 gauge with suitable
junction boxes switches and plugs etc. all fitted in
concealed 16 SWG zinc passivated embedded in walls
with moulded plate switches continuous running of 1.5
sq.mm.F.R.L.S., PVC insulated copper solid conductor
cable earthing the fixtures outlet boxes and wiring of sub
circuit & mains circuit with supply and laying of 2x1.5
sq.mm.F.R.L.S., PVC insulated copper conductor cable
ans 1.5 sq.mm. F.R.L.S.,PVC insulated copper soild
conductor cable for earthing from the distribution board
as required (All wiring items include provision of conduit
and all fittings / conduit accessories complete wiring and
switches)

a. Wiring as above for a light point controlled by a 6A


switch. Point 30
b. Wiring as above for a bracket / ceiling fan controlled by
a 6A switch. Point 21
c. Wiring as above for exhaust fan point controlled by a 6A
switch. Point 4
d. Wiring as above for two light points controlled by a 6A
switch. Point 20

e Wiring as above for universal 2/3 pin 6A socket with


switch outlet point. Point 17
2 Wiring for universal 6 pin 16x6A power socket outlet
point with 2x4 sq.mm.F.R.L.S., PVC insulated copper
conductor cable in surface / recessed MS conduit 16
gauge including providing and fixing 6 pin 16x6A socket
outlet with moulded switch plates with zinc passivated
boxes embedded in walls including continous running of
4 sq.mm. F.R.L.S.,PVC insulated copper solid conductor
cable and earthing the 3rd pin required ( only one power
point per circuit will be wired.)
Point 15
17

S.NO DESCRIPTION OF ITEM UNIT QTY Rate Amount

3 Supplying & fixing of 1 no. 16 Amps moulded switch and


3 nos. 6 Amps moulded sockets in partition with box and
including with 2x4 sq.mmF.R.L.S., PVC insulated copper
conductor cable in surface / recessed MS conduit and
earthing the 3rd pin with 1x4 sq.mm F.R.L.S.,PVC
insulated copper conductor cable complete as required
(2 point per circuit shall be wired) complete as required.

Each 17

4 Supplying and laying of PVC conduit with accessories


under floor of the following size complete as required.

a. 25mm dia Meter 40

5 Wiring for sub main with following sizes in recessed /


surface MS conduit as required.
a]. 4x35 sqmm,Aluminium armoured cable. Meter 40
b]. 4x 6 sqmm ,F.R.L.S.,copper wires. Meter 40
c] 4x 10sqmm,F.R.L.S.,copper wires. Meter 60
d] 2x 10 sqmm,F.R.L.S.,copper wires. Meter 50
6 Supplying & wiring for 3 pin 25A power plug point with
2x6sqmm,F.R.L.S., PVC insulated copper conductor
cable in surface / concealed PVC conduit 2mm thick
including providing a fixing 3 pin 25 A metal clad socket
with 25A DPMCB in sheet enclosure including earthing
the 3rd pin with 2.5 sq.mm.F.R.L.S., PVC insulated
copper solid conductor cable as required.
NO 8

SUB-HEAD I
TOTAL:
18

S.NO DESCRIPTION OF ITEM UNIT QTY Rate Amount

SUB-HEAD II:- LIGHTING FIXTURE AND FANS

1 Supplying and fixing recessed/surface decorative


type36 watt LED luminaries with mirror optics complete
with Electronic chokes/Transformer etc complete in
all respect with, lockable holders including
connections complete as required. BRANDS:-
PHILIPS/CROMPTON GREAVES/WIPRO.

a) Supply Each 29
b) Erection Each 29
2 Supplying, fixing and commissioning of 305mm 1400
RPM exhaust fan complete with louver and bird guard
screen with 3 core flexible wire complete as
required.(GEC,Bajaj,Crompton Greaves)

a] Exhaust fan Nos. 4

3 Supplying and fixing recessed/surface 2x36watt


decorative type fluorescent luminaries with mirror optics
complete with Electronic chokes, lockable holders 36W
CFL lamps including connections complete as required.
CAT NO WVP 25236,[SG] 2X 36W CFL ( TC-),
CRESCENT-Recess mounted mirror optics luminaire
with P5 Louvres, Brand WIPRO. Nos. 0
WCP 64236 (Fusion) softlite (off white reflector)
(working Area) or Equivalent Philips make

4 Supplying & fixing square type recessed fixture with


Electronic chokes/Tranformer,relay etc complete in
all respect with lockable holders, ceiling light
connections complete as required.BRANDS:-
PHILIPS/CROMPTON GREAVES/WIPRO.
a. 18 W Each 40

5 supply and erection of wall mounted fans complete fittin.

Nos. 21
6 supply and erection of ceiling fans complete
fittin.,havells/ crompton greaves 5 star rated fans Nos. 2

SUB-
HEAD II
TOTAL:
19

S.NO DESCRIPTION OF ITEM UNIT QTY Rate Amount

SUB-HEAD III:- WIRING FOR TELEPHONE

1 Point wiring:-Providing and fixing telephone wiring with


two pair telephone cable in PVC conduit including two
pair cord outlet, moulded type telephone outlet housed
in zinc passivated box with suitable connector strip in
recessed wall / partitions/floor as required. Note:- cost to
include wiring cost,conduits, RJ-11 Socket with plate
including terminations ,complete in all respect.

a. single pair cord outlet Nos. 17


b.four pair cord outlet Nos. 1

2 Supplying, and installing of MS junction box of size 300


x 300 x 40 mm suitable for adopting two run of floor
trunking of size 150x32mm embdded in floor by cutting
the existing floor to be in flush to the existing floor finish
level and rendering the floor complete with cement
concrete as approved layout complete as required
including providing steel plate top cover and frame as
required (LAN and telephone cabling)
Each 5
SUB-HEAD
III TOTAL :

S.NO DESCRIPTION OF ITEM UNIT QTY Rate Amount

SUB-HEAD IV:- DISTRIBUTION BOARD & PANELS


1 Supplying, erection and commissioning of 8 way TPN
MCB distribution board comprising of recessed sheet
steel enclosure with double door with loose wire box
100A tinned copper bus bars neutral and earth strips
interconnections etc. complete with following mountings
as required. (DB-for Power and Air conditioner) with 100
Amp MCCB 4 pole.
b) 6 SP MCB
c) 16A SP MCB
d) 20A SP MCB out going - 18 Nos. Set 1
20

2 Supplying, erection and commissioning of 6 way Vertical


TPN MCB distribution board comprising of recessed
sheet steel enclosure with double door with loose wire
box 100A tinned copper bus bars neutral and earth
strips interconnections etc. complete with following
mountings as required. (DB-for Light ).

a) 63 amp, 4P MCB as incoming - 1 no


b) 40A, 2P ELCB outgoing - 3 Nos.
c) 6 SP MCB
d) 16A SP MCB
e) 20A SP MCB out going - 18 Nos. Set 1

3 Supplying, erection and commissioning of 4 way TPN


MCB distribution board comprising of recessed sheet
steel enclosure with double door with loose wire box
100A tinned copper bus bars neutral and earth strips
interconnections etc. complete with following mountings
as reqired. (Computer DB)
a) 40A, 4P MCB as incoming - 1 No.
b) 40A, 2P ELCB outgoing - 3 Nos.
c) 10A SP MCB
d) 20A SP MCB -12Nos. Set 1

4 Supplying, erection testing and commissioning of cubical


type sheet steel clad clad mounted totally enclosed LT
switch board suitable for use on 415V 3 phase 4 wire 50
cycles complete housed with incoming and
outgoing,200A tinned copper bus bar including
interconnection accessories etc. Complete as required
and with following incoming and outgoing switchgear as
per specification and drawings.
INCOMING
a)200A, 4P MCCB (25KA) - 1 No
& 200 Amp TPN Bus bar - 1 set
b) Voltmeter 0-500V with selector switch -1No
c) Ammeter 0-100A with selector switch $ CTs-1Set
d)Indicating lamp RYB -1 Set
OUTGOING
a) 100Amp 4P MCCB -1Nos. Set 1
b) 125Amp 4P MCCB for power & A/C -1Nos.
C) 100Amp 4P changeover (1 for ups & 1 for light)-
2Nos.
d) 63AMP 4P MCB -2nos,

SUB-HEAD IV TOTAL:
21

SUB-HEAD V:- DATA CABLING SYSTEM

1 Providing & fixing IOU, of AT & T make including the


square face plate and M.S.housing box with RJ-45
Socket etc.complete in all respect.including cat -6 Data
cable,pvc conduits, identification ferrules, complete in all
respect including comissioning of the hub.(Contractor
will be responsible for structure cable approvel for AT &
T)
no 17
2 PROVIDING & FIXING,COMMISIONING OF JACK
PANEL & HUB AND COMMISIONING IT., 24 PORT
NO 2

3 Providing and fixing Mounting cords one per port.

i] for 3'-0" long Nos. 17


ii for 7'-0" long Nos. 17
SUB-HEAD V TOTAL:

S.NO DESCRIPTION OF ITEM UNIT QTY Rate Amount

SUB-HEAD VI:- EARTHING

1 Supplying and erection of earthing electode of Cu pipe


4.5 M long and 40mm dia class-B including accessories
and providing masonry enclosure with 6mm Cu cover
plate and 25x25x6mm angle iron frame with locking
arrangemnt including excavation with charcoal and salt
as required as per technical specifications.

Set 3
2 Supplying, laying and terminating earth connection with
25x6mm Cu strip in 40mm dia GI pipe "B" class from
earth electrode as required.
Meter 25
3 Supplying and laying 25x6mm Cu strip on the trench /
tray wall with Cu saddles at 600 mm interval as
required.
Meter 25
4 Providing and fxing 8 SWG Cu wire in recess or surface
for loop earthing with submain conduit and LT. cable
from panel to DB's as required.
Meter 25
SUB-HEAD VI TOTAL:
22

SUB-HEAD VII:- MUSIC SYSTEM

1 Supplying ,installation ,testing & commisioning of 8 ohms,


6 watt, 6" dia speaker of BOSCH make recessed on the
false ceiling complete with line matching transformer.

Set 10
2 Supplying ,installation ,testing & commisioning of Music
system DVD Philips make & 120 watt amplifier having USB
port for pen drive Bosch make.
Meter 1
3 Supplying ,installation ,testing & commisioning of point
wiring of speaker with 1 no of 2 core 14/36 SWG or 2 core
1.5 sq.mm stranded tin copper flexible wire run in 20/25
dia pvc conduits. All conduits shall run above false ceiling
with PVC spacers, clamps etc. complete.

Meter 250

SUB-HEAD VII TOTAL:


23

SUBHEAD
-VIII BOQ for Fire alarm system for SBP,Murthal Branch.

Sr.no Description Qnt. Unit Rate Amount


SUB-HEAD V:- WIRING FOR FIRE
ALARM SYSTEM
supplying and laying 2 core, 1.5 sqmm
1 armoured cable 250 m
Supplying, installation, testing and
commissioning of ionization type
smoke detector ,AppoIlo,System
sensor make, 65 series twin blinking
2 LED as required. 10 No.
Supplying, installation, testing and
commissioning of optical type smoke
detector, Appolo,System Senor, Moles
3 make, 65 series.as required. 10 No.
Supplying, installation, testing and
commissioning of variable heat
detector , Appolo make, 65 series,
system sensor as required.
4 3 No.
Supplying, installation, testing and
commissioning of duel tone electronic
hooter suitable for wall mounted
electronic hooter for complete with 75
decibel sound as
required.[Appollo,GST,System
Sensor,Moles]
5 2 No.
Supplying, installation, testing and
commissioning of manual call box in
suitable enclosure with
hammer.[Appollo,GST,System
6 Sensor,Moles] as per IS 2189. 2 No.
Supplying, installation, testing and
commissioning of microprocess. base
main fire alarm control panel of 2[ two]
zone capacity ([Appollo,GST,System
Sensor,Moles]make)as complete with
Exide Maintenance free batteries &
charger illuminated numeric display
complete as required with Auto dialer.
7 1 No.
Supplying, installation, panic switch
8 button 2 No.
Total of fire alarm system=
24

S.NO DESCRIPTION OF ITEM UNIT QTY Rate Amount

SUB-HEAD IX :- AIRCONDITIONING

1]a] SUPPLY ,ERECTION,TESTING & COMMISIONING OF SPLIT AIR


CONDITIONER 1.5 TR,3-STAR RATED A/C OF VOLTAS/ BLUE
STAR /CARRIER/HITACHI no 2

1]b] SUPPLY,ERECTION,TESTING & COMMISIONING OF SPLIT AIR


CONDITIONER 2 TR,3-STAR RATED A/C OF VOLTAS/ BLUE
STAR /CARRIER/HITACHI no 5

2] SUPPLY OF AUTOMATIC VOLTAGE STABILISER no 2


OF 4 KVA , with 3 step relay and input voltage
range of 140-280 and output to be 230 V crystal care/skybird/
logicstat make, wall mounted model.
3]
SUPPLY OF AUTOMATIC VOLTAGE STABILISER no 5
OF 5 KVA , with 3 step relay and input voltage
range of 140-280 and output to be 230 V crystal care/skybird/
logicstat make, wall mounted model.
4]
EXCEEDING COPPER PIPEING AFTER 5 METRE WITH
INSULATION AND WIRE. m 100

5] PROVIDING AND FIXING OF IRON ANGLE STAND WITH CAGE


FOR CODENSING UNIT
no 7

6] CONNECTING OF MS PVC DRAIN PIPE 25MM m 120

A] Scope of Work-Supplying, erection, testing and commissioning


wall mounted Split units with remote &voltage stabilizer complete
including copper refrigerant piping for(4.0 mtrs.) connecting indoor
units, drain piping with all necessary fittings duly insulated with 9mm
thick nitrile rubber pipe insulation with evaporator coil, fan and fan
motor, control panel with cabling between control panels and units.
All completeas per drawing, approval and instructions of the
Architect / Bank.

Warranty:-One year from the date of invoice for Airconditioners,


and another 5

year for the compressor., warranty card to be surrendered to the


bank.
Scope of work:-1]Installation of indoor & outdoor units.
2]Connection of refrigerant (Copper) piping up to 4.0 meter length, free with unit
3]Insulation of refrigerant (Copper) piping
4]Pressure testing & gas charging for split Airconditioners.
SUB-HEAD A/C TOTAL:
25
26

Das könnte Ihnen auch gefallen