Beruflich Dokumente
Kultur Dokumente
CONDENSING UNITS
50 Hz
R22
R134a
R404A
R507
1 CYLINDER
2 CYLINDERS
4 CYLINDERS
GENERAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . p 4
PERFORMANCE DATA . . . . . . . . . . . . . . . . . . . . . . . . . p 6
OVERALL DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . p 13
ELECTRICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . p 14
Electrical characteristics . . . . . . . . . . . . . . . . . . . p 14
Electrical connections . . . . . . . . . . . . . . . . . . . . . p 15
CONDENSING UNITS
50 Hz catalogue
50 Hz Bluestar
product program
PRODUCT RANGE
medium temperature
0C
application
MGZ HGZ HGM MGM
-10C
R22
R22
-20C
ambient ambient
R404A
R404A
temperature temperature
R507
R507
up to 46C up to 38C
-30C
ambient ambient
temperature
up to 38C
temperature
up to 46C 50Hz
MULTI-APPLICATION
low temperature
-20C
MULTI-REFRIGERANT
application
LGZ
MGM
HGM ) Mineral oil
160 P
-30C MG Z
HGZ ) Ester oil
160 PZ
R404A
R507
L GZ ) Ester oil
160 Z
-40C M Medium temperature application
ambient
temperature H Medium temperature application
up to 43C
high ambient
L Low temperature application
STANDARD PRODUCT
DESCRIPTION
The multi-purpose series of - Compressor oil charge, 160P for - Danfoss HP/LP safety switch.
Bluestar condensing units include R22 version and 160PZ (MGZ-
- Reinforced base frame.
as standard: HGZ), 160Z (LGZ) for HFC ver-
sion. - All components epoxy powder
coated.
- Hermetic compressors for R22 or - High efficiency condensers (2 fans,
R134a / R404A / R507 refrigerants, rifled tubes and louvre fins). - Dry holding charge.
fitted with screw type sight glass,
- 33 bar maxi operating pressure 100%
suction and discharge valves, tested
liquid receiver (except 3,1 litre
built-in protections : pressure,
receivers R22 models M.O.P.
temperature, current.
25 bar) with welded shut-off valve.
- Crankcase heater (auto regulated
- Factory fitted suction and liquid
PTC, 35 W), or trickle circuit for
stubs for brazed connections.
small size single phase compressors
in R22 version. - Prewired electrical boxes.
M G Z 125 S 00 E
Application Compressor & fan
M: Medium temperature motor voltage code
H: Medium temp. high ambient refer to the voltage code tables
L: Low temperature (page 3)
Design
G: reciprocating compressor, twin fan condenser Product configuration
refer to the option code number table below
Refrigerant / lubricant
M: R22 / mineral oil Approvals indication
Z: R134a-R404A-R507 / ester oil refer to products data sheet
BLUESTAR PHILOSOPHY
Danfoss Maneurop condensing units For theses reasons, Danfoss Maneurop medium (M normal ambient, H high
have evolved over the years to meet has made possible a global product ambient) temperature applications.
present and future requirements of development in an effort to Based on this product design,
performance, sound level, compactness, harmonise the various regional two imperative criterias must be
construction quality, and conformity standards, thus offering design considered:
with ecological standards. synergies through a wide programme The product configuration
Today, a successful conception of condensing units. The approvals indication
and production means compliance The G ranges of Bluestar include By referring to theses codes and
with not only the specifics of the a Maneurop compressor and a letter it becomes easy to establish if
application but also the regional multifan condenser. These units the product complies to both tech-
market regulation and standards. could be used for both low (L) and nical and regulation requirements.
PRODUCT CONFIGURATION
This information is given by a 2 applied to standard models. listed below. Other options may be
digit option code number which The main construction variations developed according to your require-
defines the construction variations applicable on standard products are ment, please contact your Danfoss
Option code numbers table Maneurop Sales Organisation.
APPROVALS INDICATION
This information is given by conformity to the main or specific description of special models and
a letter which informs about the regulations inside a region. the corresponding approvals, please
condensing unit components To determine the precise product refer to the Bluestar Data Sheets.
CONDENSING UNITS
50 Hz catalogue 2
50 Hz Bluestar
product program
Description Code 016 018 022 028 032 036 040 050 064 080 100 125 144 160
Description Code 018 022 028 032 036 040 050 064 080 100 125 144 160
Voltage LGZ
Compressor Condenser
Weight Type Swept Oil Air Coil Fan
Models (kg) volume charge Flow
Type Intern. vol. Number Fan blade
(m3/h) (dm3) (m3/h) (dm3) (Nb) (mm)
MGM / MGZ 016 48 MT / MTZ 18 5,26 0,95 1740 A3 0,6 2 254
MGM / MGZ 018 48 MT / MTZ 18 5,26 0,95 1450 B3 1,1 2 254
MGM 022 49 MT 22 6,58 0,95 1450 B3 1,1 2 254
MGZ 022 49 MTZ 22 6,58 0,95 1300 C3 1,7 2 254
MGM / MGZ 028 51 MT / MTZ 28 8,29 0,95 1300 C3 1,7 2 254
MGM / MGZ 032 62 MT / MTZ 32 9,3 0,95 2800 D3 1,5 2 300
MGM 036 62 MT 36 10,6 0,95 2800 D3 1,5 2 300
MGZ 036 62 MTZ 36 10,6 0,95 2600 E3 2,2 2 300
MGM / MGZ 040 68 MT / MTZ 40 12 0,95 2600 E3 2,2 2 300
MGM / MGZ 050 85 MT / MTZ 50 14,8 1,8 4600 G3 2,3 2 355
MGM / MGZ 064 99 MT / MTZ 64 18,6 1,8 3600 H3 4,7 2 355
MGM / MGZ 080 115 MT / MTZ 80 23,7 1,8 5400 J3 4,7 2 400
MGM / MGZ 100 145 MT / MTZ 100 29,8 3,9 8600 L3 5,1 2 450
MGM / MGZ 125 154 MT / MTZ 125 37,6 3,9 8200 M3 6,8 2 450
MGM / MGZ 144 159 MT / MTZ 144 42 3,9 8200 M3 6,8 2 450
MGM / MGZ 160 165 MT / MTZ 160 47,25 3,9 8000 N3 8,5 2 450
CONDENSING UNITS
50 Hz catalogue 4
General
specifications
3,1 252 130 3/8 / 10 3/8 / 10 1/2 / 12 3/8 / 10 3/8 / 10 HGM / HGZ 018
6 291 170 1/2 / 12 1/2 / 12 1/2 / 12 1/2 / 12 1/2 / 12 HGM / HGZ 022
6 291 170 1/2 / 12 1/2 / 12 1/2 / 12 1/2 / 12 1/2 / 12 HGM / HGZ 028
6 291 170 1/2 / 12 1/2 / 12 5/8 / 16 1/2 / 12 1/2 / 12 HGM / HGZ 032
6 291 170 1/2 / 12 1/2 / 12 5/8 / 16 1/2 / 12 1/2 / 12 HGM 036
7,5 384 170 5/8 / 16 1/2 / 12 5/8 / 16 1/2 / 12 1/2 / 12 HGZ 036
7,5 384 170 5/8 / 16 1/2 / 12 5/8 / 16 1/2 / 12 1/2 / 12 HGM / HGZ 040
7,5 384 170 5/8 / 16 1/2 / 12 7/8 / 22 5/8 / 16 1/2 / 12 HGM / HGZ 050
10 350 220 3/4 / 19 5/8 / 16 7/8 / 22 3/4 / 19 1/2 / 12 HGM / HGZ 064
10 350 220 3/4 / 19 5/8 / 16 1 1/8 / 28 3/4 / 19 1/2 / 12 HGM / HGZ 080
14 455 220 3/4 / 19 5/8 / 16 1 1/8 / 28 3/4 / 19 5/8 / 16 HGM / HGZ 100
14 455 220 3/4 / 19 5/8 / 16 1 1/8 / 28 7/8 / 22 5/8 / 16 HGM / HGZ 125
14 455 220 3/4 / 19 5/8 / 16 1 1/8 / 28 7/8 / 22 5/8 / 16 HGM / HGZ 144
14 455 220 3/4 / 19 5/8 / 16 1 1/8 / 28 7/8 / 22 5/8 / 16 HGM / HGZ 160
3,1 252 130 3/8 / 10 3/8 / 10 5/8 / 16 3/8 / 10 3/8 / 10 LGZ 022
3,1 252 130 1/2 / 12 1/2 / 12 5/8 / 16 1/2 / 12 3/8 / 10 LGZ 028
6 291 170 5/8 / 16 1/2 / 12 7/8 / 22 5/8 / 16 1/2 / 12 LGZ 040
7,5 384 170 5/8 / 16 1/2 / 12 7/8 / 22 5/8 / 16 1/2 / 12 LGZ 044
7,5 384 170 5/8 / 16 1/2 / 12 7/8 / 22 5/8 / 16 1/2 / 12 LGZ 050
10 350 220 3/4 / 19 5/8 / 16 1 1/8 / 28 3/4 / 19 1/2 / 12 LGZ 088
10 350 220 3/4 / 19 5/8 / 16 1 1/8 / 28 3/4 / 19 1/2 / 12 LGZ 100
CONDENSING UNITS
50 Hz catalogue 6
Performance data
50 Hz
HGM R22
TE + 10C + 5C 0C - 5C - 10C - 15C - 20C
Models
TA P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A.
27 4950 1,3 4070 1,2 3300 1,1 2620 1 2030 0,9 1530 0,8 - -
HGM 018 32 4590 1,4 3780 1,3 3060 1,2 2420 1,1 1860 0,9 1400 0,8 - -
38 4160 1,5 3420 1,4 2770 1,2 2180 1,1 1670 1,0 1240 0,8 880 0,7
46 3750 1,6 2950 1,5 2370 1,3 1860 1,2 1410 1,0 1040 0,9 - -
27 6680 1,7 5620 1,6 4650 1,5 3780 1,3 3000 1,2 2310 1,0 - -
HGM 022 32 6250 1,8 5240 1,7 4330 1,6 3490 1,4 2750 1,2 2090 1,1 - -
38 5710 1,9 4780 1,8 3930 1,6 3150 1,4 2450 1,3 1830 1,1 1290 0,9
46 4980 2,1 4150 1,9 3380 1,7 2680 1,5 2050 1,3 - - - -
27 8700 2,2 7440 2,1 6270 2,0 5210 1,9 4240 1,7 3370 1,5 - -
HGM 028 32 8200 2,4 7000 2,3 5900 2,1 4880 1,9 3960 1,8 3120 1,6 - -
38 7600 2,6 6480 2,4 5430 2,2 4470 2,0 3600 1,8 2800 1,6 2100 1,4
46 6740 2,9 5730 2,7 4780 2,4 3910 2,1 3110 1,9 2380 1,6 - -
27 9400 2,8 8000 2,6 6710 2,4 5540 2,2 4500 2,0 3580 1,8 - -
HGM 032 32 8840 2,9 7510 2,7 6270 2,5 5160 2,3 4160 2,1 3280 1,9 - -
38 8160 3,2 6910 2,9 5760 2,6 4720 2,4 3770 2,1 2930 1,9 2200 1,7
46 7260 3,4 6150 3,1 5110 2,8 4150 2,5 3300 2,2 2520 1,9 - -
27 10360 3,2 8950 3,0 7640 2,7 6410 2,5 5280 2,2 4260 2,0 - -
HGM 036 32 9750 3,4 8420 3,1 7160 2,9 5990 2,6 4910 2,3 3930 2,1 - -
38 8990 3,7 7750 3,3 6570 3,0 5470 2,7 4450 2,4 3520 2,1 2700 1,9
46 7940 4,0 6850 3,6 5780 3,2 4770 2,9 3840 2,5 2950 2,2 - -
27 12280 3,2 10500 3,1 8860 2,9 7380 2,7 6050 2,4 4860 2,1 - -
HGM 040 32 11740 3,5 9990 3,3 8400 3,1 6950 2,8 5650 2,5 4490 2,3 - -
38 11060 3,9 9370 3,6 7830 3,3 6430 3,0 5170 2,7 4040 2,4 - -
46 10142 4,3 8540 3,9 7070 3,6 5730 3,2 4520 2,9 - - - -
27 15500 3,8 12900 3,5 10610 3,2 8630 2,9 6930 2,6 5500 2,3 - -
HGM 050 32 14630 4,1 12150 3,7 9970 3,4 8070 3,1 6440 2,8 5080 2,4 - -
38 13560 4,3 11230 4,0 9170 3,6 7390 3,3 5850 2,9 4570 2,6 - -
46 12080 4,7 9960 4,3 8090 3,9 6460 3,5 5060 3,1 3890 2,8 - -
27 18820 5,1 15890 4,7 13240 4,4 10850 4,0 8740 3,5 6890 3,1 - -
HGM 064 32 17740 5,5 14960 5,1 12430 4,6 10150 4,2 8130 3,7 6360 3,3 - -
38 16410 5,9 13830 5,4 11460 4,9 9330 4,4 7430 4,0 5760 3,5 4320 3,0
46 14660 6,4 12350 5,8 10220 5,3 8300 4,7 6550 4,2 5000 3,7 - -
27 23390 6,4 19890 5,9 16680 5,4 13750 4,9 11140 4,4 8800 3,9 - -
HGM 080 32 22050 6,8 18730 6,3 15670 5,7 12890 5,2 10380 4,6 8150 4,1 - -
38 20400 7,3 17340 6,7 14490 6,1 11880 5,5 9520 4,9 7420 4,4 5560 3,8
46 18250 8,1 15510 7,4 13970 6,7 10630 6,0 8490 5,4 6570 4,8 - -
27 29120 6,9 24550 6,6 20440 6,3 16800 5,9 13610 5,4 10850 5,0 - -
HGM 100 32 27240 7,4 22900 7,0 18990 6,6 15520 6,1 12470 5,6 9820 5,1 - -
38 25020 8,0 20980 7,5 17320 7,0 14050 6,4 11170 5,8 8680 5,2 6540 4,6
46 22160 8,9 18520 8,2 15220 7,5 12900 6,8 9630 6,1 7350 5,4 - -
27 38240 9,4 32380 8,8 27050 8,2 22270 7,6 18060 6,9 14390 6,3 11230 5,6
HGM 125 32 35840 10,1 30290 9,4 25260 8,7 20750 8,0 16750 7,3 13270 6,6 10270 5,9
38 32860 10,9 27760 10,1 23110 9,3 18930 8,5 15220 7,7 11970 6,9 9170 6,1
46 28850 11,9 24380 10,9 20280 10,0 16570 9,0 13270 8,1 10370 7,3 - -
27 41690 10,8 35370 10,1 29660 9,3 24530 8,5 19960 7,8 15990 7,0 - -
HGM 144 32 39010 11,5 33110 10,7 27710 9,8 22830 9,0 18520 8,2 14730 7,4 - -
38 36090 12,3 30530 11,3 25460 10,4 20900 9,5 16840 8,6 13300 7,7 10240 6,9
46 31600 13,4 26730 12,2 22260 11,1 18230 10,1 14630 9,1 11470 8,1 - -
27 47510 12,1 40190 11,2 33580 10,4 27700 9,6 22500 8,8 17990 8,0 14130 7,1
HGM 160 32 44460 12,9 37590 11,9 31380 11,0 25800 10,1 20880 9,2 16600 8,3 12940 7,4
38 40790 13,9 34460 12,8 28710 11,7 23550 10,7 18980 9,7 15000 8,7 11580 7,8
46 35780 15,1 30230 13,8 25160 12,5 20590 11,4 16530 10,2 12980 9,1 - -
CONDENSING UNITS
50 Hz catalogue 8
Performance data
50 Hz
MGZ R134a
TE + 10C + 5C 0C - 5C - 10C - 15C
Models
TA P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A.
27 - - 2595 0,9 2126 0,8 1689 0,7 1299 0,7 955 0,6
MGZ 016 32 - - 2382 0,9 1943 0,8 1534 0,8 1166 0,7 837 0,6
38 - - 2120 1,0 1732 0,9 1361 0,8 1022 0,7 718 0,6
27 3543 0,9 2922 0,8 2360 0,8 1863 0,7 1423 0,6 1042 0,6
MGZ 018 32 3269 1,0 2689 0,9 2162 0,8 1689 0,7 1270 0,7 906 0,6
38 2925 1,0 2409 0,9 1934 0,8 1498 0,8 1113 0,7 776 0,6
27 4495 1,1 3700 1,0 2985 0,9 2356 0,9 1809 0,8 1343 0,7
MGZ 022 32 4167 1,2 3425 1,1 2752 1,0 2153 0,9 1636 0,8 1191 0,7
38 3748 1,3 3085 1,1 2476 1,0 1928 0,9 1451 0,8 1039 0,7
27 5257 1,5 4332 1,3 3492 1,2 2755 1,1 2134 1,0 1613 0,8
MGZ 028 32 4880 1,6 4022 1,4 3238 1,3 2545 1,1 1956 1,0 1463 0,9
38 4396 1,7 3633 1,5 2931 1,3 2298 1,2 1767 1,0 1314 0,9
27 6418 1,8 5259 1,6 4229 1,5 3333 1,4 2578 1,2 1938 1,0
MGZ 032 32 5983 1,9 4897 1,7 3930 1,5 3078 1,4 2356 1,2 1746 1,1
38 5428 2,0 4449 1,8 3565 1,6 2783 1,4 2113 1,3 1547 1,1
27 7638 2,0 6371 1,8 5236 1,7 4238 1,5 3374 1,4 2629 1,2
MGZ 036 32 7173 2,1 5998 1,9 4920 1,7 3971 1,6 3142 1,4 2430 1,3
38 6588 2,3 5510 2,0 4526 1,8 3644 1,7 2878 1,5 2208 1,3
27 7828 2,2 6653 2,0 5578 1,8 4607 1,7 3756 1,5 2999 1,3
MGZ 040 32 7399 2,3 6297 2,1 5282 1,9 4359 1,7 3539 1,6 2816 1,4
38 6837 2,5 5831 2,3 4896 2,0 4044 1,8 3276 1,7 2595 1,5
27 10389 2,8 8532 2,5 6930 2,3 5523 2,1 4323 1,9 3297 1,7
MGZ 050 32 9628 3,0 7953 2,6 6434 2,4 5093 2,2 3931 2,0 2951 1,8
38 8786 3,1 7234 2,8 5831 2,5 4594 2,3 3515 2,0 2594 1,8
27 13352 3,5 11031 3,2 8948 2,9 7109 2,6 5549 2,3 4211 2,0
MGZ 064 32 12470 3,7 10277 3,3 8310 3,0 6565 2,7 5059 2,4 3775 2,1
38 11393 3,8 9382 3,5 7551 3,1 5927 2,8 4518 2,4 3311 2,1
27 17196 4,6 14356 4,1 11801 3,7 9533 3,4 7566 3,0 5865 2,6
MGZ 080 32 16138 4,8 13475 4,2 11043 3,8 8891 3,4 6994 3,0 5361 2,7
38 14809 4,9 12371 4,4 10125 3,9 8107 3,5 6331 3,1 4797 2,8
27 20547 4,9 16935 4,4 13704 4,1 10893 3,8 8493 3,4 6435 3,0
MGZ 100 32 19230 5,2 15813 4,7 12741 4,3 10063 3,9 7755 3,5 5789 3,2
38 17584 5,5 14460 5,0 11627 4,5 9123 4,1 6972 3,7 5132 3,2
27 24996 6,0 20740 5,5 16904 4,9 13570 4,5 10674 4,0 8184 3,5
MGZ 125 32 23367 6,3 19337 5,7 15713 5,1 12525 4,6 9731 4,1 7361 3,6
38 21313 6,6 17621 6,0 14275 5,3 11311 4,8 8696 4,2 6452 3,6
27 28996 7,8 24380 6,9 20116 6,3 16331 5,8 13032 5,2 10162 4,5
MGZ 144 32 27168 8,0 22793 7,3 18792 6,6 15189 5,9 12039 5,3 9272 4,7
38 24794 8,5 20840 7,7 17176 6,8 13847 6,2 10894 5,5 8305 4,9
27 31977 8,6 26853 7,6 22191 6,9 18019 6,3 14383 5,6 11209 4,9
MGZ 160 32 29832 8,8 25082 8,0 20722 7,2 16775 6,4 13303 5,7 10286 5,1
38 27098 9,3 22846 8,3 18888 7,4 15282 6,7 12084 5,9 9286 5,3
CONDENSING UNITS
50 Hz catalogue 10
Performance data
50 Hz
HGZ R134a
TE + 20C + 15C + 10C + 5C 0C - 5C - 10C
Models
TA P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A. P.F. P.A.
27 5176 1,0 4405 0,9 3683 0,9 3028 0,8 2444 0,8 1918 0,7 1463 0,6
HGZ 018 32 4687 1,1 4075 1,0 3403 0,9 2791 0,9 2235 0,8 1738 0,7 1308 0,7
38 4277 1,2 3656 1,1 3060 1,0 2507 0,9 2000 0,8 1545 0,8 1148 0,7
46 3589 1,3 3082 1,2 2584 1,1 2120 1,0 1687 0,9 1295 0,8 945 0,7
27 6866 1,2 5793 1,1 4810 1,1 3929 1,0 3149 0,9 2470 0,8 1890 0,8
HGZ 022 32 6406 1,3 5398 1,2 4479 1,1 3645 1,0 2904 1,0 2258 0,9 1706 0,8
38 5812 1,4 4905 1,3 4063 1,2 3307 1,1 2624 1,0 2026 0,9 1513 0,8
46 4973 1,6 4215 1,4 3497 1,3 2839 1,2 2249 1,1 1743 0,9 1270 0,8
27 8674 1,6 7244 1,5 5960 1,4 4823 1,2 3838 1,1 2995 1,0 2295 0,9
HGZ 028 32 8122 1,8 6784 1,6 5572 1,5 4493 1,3 3560 1,2 2764 1,1 2099 1,0
38 7398 1,9 6196 1,7 5092 1,6 4104 1,4 3244 1,3 2510 1,1 1897 1,0
46 6393 2,1 5369 1,9 4419 1,7 3568 1,5 2818 1,3 2179 1,2 1640 1,1
27 9718 2,0 8181 1,8 6780 1,7 5515 1,6 4423 1,5 3474 1,3 2671 1,2
HGZ 032 32 9082 2,2 7647 2,0 6323 1,8 5147 1,7 4102 1,5 3199 1,4 2437 1,2
38 8261 2,3 6966 2,1 5769 1,9 4689 1,8 3733 1,6 2895 1,4 2189 1,2
46 7081 2,5 6001 2,3 4983 2,1 4051 1,9 3218 1,6 2487 1,5 1863 1,3
27 11039 2,2 9412 2,0 7933 1,9 6582 1,8 5398 1,6 4355 1,5 3453 1,3
HGZ 036 32 10437 2,4 8903 2,2 7493 2,1 6225 1,9 5087 1,7 4084 1,5 3226 1,4
38 9630 2,6 8238 2,3 6944 2,2 5757 2,0 4701 1,8 3766 1,6 2957 1,4
46 8465 2,8 7269 2,6 6129 2,4 5090 2,1 4151 1,9 3318 1,7 2589 1,5
27 11531 2,1 9904 2,1 8434 1,9 7101 1,8 5910 1,7 4856 1,6 3931 1,4
HGZ 040 32 10971 2,4 9443 2,2 8036 2,1 6759 1,9 5616 1,8 4607 1,7 3716 1,5
38 10246 2,7 8834 2,4 7516 2,3 6330 2,1 5255 1,9 4297 1,8 3458 1,6
46 9158 3,0 7923 2,7 6762 2,5 5690 2,3 4719 2,1 3854 1,9 3087 1,7
27 16700 2,8 14018 2,7 11609 2,5 9478 2,4 7619 2,2 6027 2,1 4676 1,9
HGZ 050 32 15672 3,1 13136 2,8 10850 2,7 8823 2,5 7052 2,3 5533 2,1 4243 1,9
38 14409 3,3 12066 3,0 9961 2,9 8068 2,6 6422 2,4 4993 2,2 3780 2,0
46 12598 3,6 10568 3,4 8698 3,1 7036 2,8 5555 2,5 4287 2,3 3207 2,0
27 19943 3,9 16849 3,5 14018 3,4 11474 3,0 9268 2,8 7346 2,6 5701 2,3
HGZ 064 32 18759 4,2 15837 3,8 13148 3,5 10756 3,2 8629 2,9 6774 2,6 5196 2,4
38 17210 4,4 14540 4,0 12078 3,7 9846 3,4 7866 3,0 6141 2,7 4658 2,4
46 15018 4,9 12726 4,5 10578 4,0 8614 3,6 6837 3,2 5293 2,8 3947 2,5
27 25266 5,2 21520 4,7 18095 4,4 15010 3,9 12286 3,6 9886 3,3 7807 3,0
HGZ 080 32 23802 5,5 20299 4,9 17047 4,6 14127 4,1 11504 3,7 9206 3,4 7211 3,0
38 21901 5,8 18718 5,2 15726 4,8 13024 4,3 10579 3,9 8425 3,5 6547 3,1
46 19184 6,2 16438 5,7 13812 5,1 11417 4,6 9245 4,0 7315 3,6 5609 3,2
27 30845 5,1 26000 4,8 21612 4,5 17711 4,3 14285 4,0 11312 3,7 8783 3,4
HGZ 100 32 28940 5,6 24386 5,2 20242 5,0 16532 4,5 13264 4,2 10426 3,9 8007 3,5
38 26522 6,0 22377 5,5 18569 5,3 15146 4,8 12110 4,4 9463 4,0 7201 3,6
46 23176 6,9 19608 6,3 16275 5,8 13260 5,2 10566 4,7 8205 4,2 6176 3,7
27 38117 6,2 32211 5,9 26873 5,5 22140 5,1 17964 4,8 14331 4,4 11221 3,9
HGZ 125 32 35926 6,7 30333 6,2 25249 5,9 20714 5,5 16711 5,0 13220 4,6 10233 4,1
38 33105 7,4 27948 6,6 23234 6,3 19002 5,7 15252 5,2 11977 4,7 9164 4,1
46 29066 8,1 24555 7,4 20380 6,8 16613 6,1 13250 5,4 10306 4,8 7751 4,2
27 43829 8,3 37401 7,6 31512 7,2 26194 6,6 21479 6,1 17329 5,6 13747 5,0
HGZ 144 32 41329 8,9 35276 8,1 29696 7,6 24639 6,9 20122 6,3 16144 5,7 12700 5,2
38 38065 9,4 32537 8,5 27389 8,0 22703 7,3 18495 6,6 14771 6,0 11533 5,4
46 33379 10,2 28617 9,5 24112 8,6 19978 7,8 16230 7,0 12894 6,3 9971 5,6
27 48453 9,6 41377 8,6 34837 7,9 28920 7,3 23689 6,7 19098 6,1 15138 5,5
HGZ 160 32 45537 10,1 38905 9,1 32747 8,5 27154 7,6 22174 6,9 17794 6,2 14015 5,6
38 41679 10,5 35673 9,4 30070 8,8 24951 8,0 20350 7,2 16288 6,5 12760 5,8
46 36262 11,2 31122 10,4 26304 9,4 21867 8,5 17822 7,6 14228 6,8 11085 6,0
CONDENSING UNITS
50 Hz catalogue 12
Overall
dimensions
d c f
e
H
Fixation
Mounting
9 mm
20 a b 25
W D
HGM / HGZ 018 700 500 392 660 300 130 647 367 105
HGM / HGZ 022 800 600 442 760 400 145 747 417 75
HGM / HGZ 028 800 600 442 760 400 145 747 417 75
HGM / HGZ 032 800 600 442 760 400 145 747 417 75
HGM 036 800 600 442 760 400 145 747 417 75
HGZ 036 1000 700 555 960 460 200 937 520 70
HGM / HGZ 040 1000 700 555 960 460 200 937 520 70
HGM / HGZ 050 1000 700 555 960 460 200 937 520 95
HGM / HGZ 064 1200 800 671 1160 500 225 1132 621 100 / 150**
HGM / HGZ 080 1200 800 671 1160 500 225 1132 621 100 / 150**
HGM / HGZ 100 1200 800 671 1160 500 225 1132 621 100 / 150**
HGM / HGZ 125 1500 870 975 1460 500 225 1432 925 240
HGM / HGZ 144 1500 870 975 1460 500 225 1432 925 240
HGM / HGZ 160 1500 870 975 1460 500 225 1432 925 240
LGZ 022 700 500 392 660 300 130 647 367 105
LGZ 028 800 600 442 760 400 145 747 417 75
LGZ 040 800 600 442 760 400 145 747 417 75
LGZ 044 1000 700 555 960 460 200 937 520 70
LGZ 050 1000 700 555 960 460 200 937 520 70
LGZ 088 1200 800 671 1160 500 225 1132 621 100 / 150**
LGZ 100 1200 800 671 1160 500 225 1132 621 100 / 150**
Note: * value without cable gland, may slightly vary depending on fan manufacturer
** single/three phase fan motor
Compressor Fan *
Models Locked rotor current (A) Max. continuous current MCC (A) Max. current (A) Power input (W)
380V/3 230V/1 230V/3 380V/3 230V/1 230V/3 380V/3 230V/1 400V/1 380V/3 230V/1 400V/1
MCC is the maximum current All power wiring must comply with could result in a motor burn-out.
at which compressor internal applicable local and national codes.
For quick contactor selection refer
protector cuts out. Install field supply fused disconnect to the Danfoss brochures
Under normal conditions the (time delay or time lag fuses) Contactors for Danfoss Maneurop
condensing unit operating specific for motors. compressors and condensing units
current will be lower. Do not undersize contactors which and Definite Purpose Contactors.
CONDENSING UNITS
50 Hz catalogue 14
Electrical data
50 Hz
ELECTRICAL CONNECTIONS
Q1
L
KM1* KM1 N L1
KM2 L2
CONTROL
CIRCUIT
L3
KA TH Q F1 Q1
CONTROL CIRCUIT
KM3
KM2 KM3 KM2
KM1 F1 KM3 KA TH Q F1
W V U 11 10 9 8 7 6 5 4 3 2 1
B W N MB N MB N M B N KM1 F1
KM1 KM2 KM3
220 K
A
D D
C F1
RD W V U 11 10 9 8 7 6 5 4 3 2 1
B 1 2 5
LP A M B N MB N MB N M B N
3ARR3J4A4 P
15 K B LP A
P
PRESS
PTC B
HP PTC
COMP.
PRESS
P
S C
D C
R FAN FAN P HP
D C
COMP FAN FAN
Typical single phase wiring diagram (G), Typical three phase wiring diagram (D),
without Pump Down cycle without Pump Down cycle
Legend
A wiring diagram is included in the unit. Danfoss Maneurop terminal type connector blocks, for both
electrical box of each condensing boxes are equipped with screw power connectors and controls.
CAPACITORS TABLE
FOR SINGLE PHASE VERSION
In place of capacitor A, a single run capacitor might be used and would have a capacity equal to A+C values.
For fan motor capacitor value (D), refer to the wiring diagram inside the unit electrical box.
The condensing unit must be loca- will be always in conformity with To optimize the unit running condi-
ted in a well ventilated area, air condensing unit selection. tions, the condenser coil must be
flow through the unit shall not be cleanned at regular intervals.
Be sure the unit is protected from
restricted in any way.
prevailing winds.
It is important to check there is no
condenser air flow recirculation Check for proper fan rotation:
and that ambient air temperature air towards the compressor. Recommended unit site installation.
W D
Weatherproof housing
For outdoor installation, provide When the condensing unit is installed
a shelter or use the Bluestar in a factory assembled refrigeration
H
Dimensions
Condensing units models Size
W D H
MGM / MGZ 016 - 028 HGM / HGZ 018 LGZ 022 750 575 435 1G
MGM / MGZ 032 - 040 HGM / HGZ 022 - 032, HGM 036 LGZ 028 - 040 850 675 485 2G
MGM / MGZ 050 - 080 HGM / HGZ 040 - 050, HGZ 036 LGZ 044 - 050 1050 775 585 3G
MGM / MGZ 100 - 160 HGM / HGZ 064 - 100 LGZ 088 - 100 1250 875 700 4G
- HGM / HGZ 125 - 160 - 1550 945 1000 5G
CONDENSING UNITS
50 Hz catalogue 16
Installation
and service
REFRIGERATING CONNECTIONS
Only use clean, dehydrated copper The refrigerating pipework must be The suction gas velocity must be
refrigeration tubing. as simple and as short as possible, sufficient to ensure a good oil
avoid low points on pipework return, within 8 to 12 m/s in vertical
The compressor pipework has to
where oil could accumulate. risers.
be flexible (pipe run in 3 directions
or in a circular mode, or equipped On suction line, horizontal In horizontal pipes this velocity can
with vibration absorbers). sections shall be slopped downward decrease down to 4 m/s.
It is important not to fasten towards the compressor.
The use of U-trap and double
the pipework too close to the suction risers are often required.
compressor.
These suction risers must always
be fitted with a U-trap at the bottom
and a P-trap at the top and never
be higher than 4 m unless a second
U-trap system is fitted.
To condenser
Compressor
As small as possible
Evaporators
When the evaporator is installed Depending on the application the discharge gas temperature which
above the compressor, suction line following values should be considered : shall never be higher than 130C.
design shall prevent liquid refrige- - evaporator superheat between For specific applications (multi eva-
rant flood back to the compressor 5 and 12K, porator system, long pipe runs, )
during off cycle. - suction gas superheat at compres- the use of an oil separator connec-
The suction line must always be sor inlet 30 K maximum. ted to the discharge side of the
insulated to avoid condensation A too important superheat causes compressor is recommended.
and abnormal superheat. a rapid increase of the compressor
SYSTEM CLEANLINESS
SYSTEM CLEANLINESS
LUBRICANT
Three types of lubricants are used : - mineral oil 160P for MGM and HGM
- ester oil 160PZ for MGZ and HGZ
- ester oil 160Z for LGZ
Models Oil type 1 litre can ref. 2 litre can ref. 5 litre can ref.
The condensing unit compressor sufficient for standard applications, When the compressor is running
is supplied with an initial oil charge it is important to check the oil smoothly at stabilised conditions
(refer to part 3 of this document). level during the start-up period. the oil level must be between 1/2
On delivery the oil level can be During this starting procedure and 3/4 of the oil sight glass.
checked through compressor sight no oil addition is required except Liquid refrigerant in the compressor
glass. when oil level is no longer visible sump at start-up may give wrong
Although this initial oil charge is in the sight glass. oil level indication.
CONDENSING UNITS
50 Hz catalogue 18
Operating limits
and safeties
The refrigerant charge limit for According to the size of compressors evaluate if additional precautions
Maneurop reciprocating fitted on condensing units, are required :
compressors, is 2,5 kg per cylinder. the following table shall be used to
Refrigerant
Condensing units models Compressor charge limit
(kg)
MGM / MGZ 016 - 040 HGM / HGZ 018 - 040 LGZ 022 - 028 1 cyl. 2,5
MGM / MGZ 050 - 080 HGM / HGZ 050 - 080 LGZ 040 - 050 2 cyl. 5,0
MGM / MGZ 100 - 160 HGM / HGZ 100 - 160 LGZ 088 - 100 4 cyl. 10,0
F0
Legend:
KS F4
KM1 KM2 KM3 Q1: power fused KM1: compressor contactor
F1 disconnect
F2
KM2-KM3: fan contactor
180 s KM1
FO: control circuit fuses
SAFETY PRESS
F3 KS: safety devices
LP A
P F1: compressor overload
CONTROL B
protection 180s: short cycle timer
PRESS HP
Q TH P P
TH: control (thermostat)
BP C D F2-F3: fan overload
LLSV M1 M2 M3
protection LLSV: liquid line solenoid
KM1 KM2 KM3 KS
F4: PTC fuses valve
COMP FAN FAN PTC
The Danfoss HP/LP pressure switch should the discharge pressure The HP switch must either
KP17W (automatic reset), or KP15 exceed the values shown in the be in a lockout circuit or be
(manual reset), is not factory following table.The high pressure a manual reset device (KP15)
preset. Be sure that the high switch can be set to lower values to prevent short cycling on its high
pressure setting will not exceed depending on the application and pressure limit.
the receiver maximum service ambient conditions.
pressure. Refrigerant R22 R134a R404A
High pressure safety Setting (bar g.) 28 *
20.2 28
The high pressure safety switch is Setting (psig) 400 300 400
required to stop the compressor, *
Except MGM / HGM unit with 3 litres receivers: 25 bar, 360 Psig
Condensing pressure control of the condensing temperature. Both single and three phase fan
The double fan condenser design Continuous fans speed control is motors used in Bluestar units are
makes condensing pressure control an alternate method for maintening suitable for speed control.
easy. constant condensing temperature Fan speed controllers usually use
A high pressure control pressurestat under fluctuating ambient. the voltage feed to the motor
(type KP 5 Danfoss) could be used This will also improve compressor to control its speed as a function
for starting and stopping fans to operational reliability, noise level of the condensing temperature
prevent a wide fluctuation and energy consumption. or pressure.
CONDENSING UNITS
50 Hz catalogue 20
Operating limits
and safeties
There must be no more than 12 If necessary, use an anti-short-cycle When a soft start equipment
starts per hour. A higher number timer in the control circuit. is used the maximum number of
reduces the service life of the A three-minutes time-out is start shall not exceed 6 / hour.
motor-compressor unit. recommended.
SOUND LEVEL
Bluestar condensing units For extra low sound system frequency attenuation in the range
are engineered for low sound and requirements compressor acoustic of 6 to 8 dB(A).
vibration characteristics with hood could be used to further These acoustic hoods are of the
a compact condenser and two fan dampen compressor sound. quick and easy fit-on type and do
construction. These accessory covers incorpora- not excessively increase the overall
The table below give the unit te sound proofing materials size of the compressor.
sound level. and achieve excellent high and low
For further technical details, refer to Danfoss Maneurop Technical information n051, or contact Danfoss Maneurop sales organisation
France
USA India
Brazil
New Zealand
Anse
GA036 - 01/99 GB - Replace CC026 10/97 GB.
France
Lawrenceville
Georgia - USA
Trvoux
France
Simplicity
A single voltage code digit*
gives you the compressor
and condenser fan voltages.
More information
The option code number S00**
defines the product configuration
with its attached approvals.
Worldwide service
This unique model
designation guarantees
a worldwide after sales
support through
the Danfoss network.
** To introduce this new code extension a dual model designation will be printed
on units name plates during 1999.
** See table page 2 in Selection & Application Guidelines ref. GA036 01/99 - GB.