Beruflich Dokumente
Kultur Dokumente
RIC-LC
Data Sheet
RIC-LC
RIC-LC
Ethernet Converter for Bonded PDH Circuits
RIC-LC is a Fast Ethernet over E1 converter The device can be used in a point-to-point
that provides simple, efficient and application or in a hub-and-spoke
cost-effective Fast Ethernet connectivity topology, operating with RADs Egate-100,
over one, four, eight or sixteen bonded E1 Egate-2000 and RICi-16 or third-party
circuits. The device enables service gateways.
providers to supply high-capacity Ethernet Typical applications include:
services to remote locations and
transparently connect corporate LANs Ethernet private Line/LAN services
over existing E1 links. IP DSLAM, cellular IP, and WiMAX
RIC-LC supports standard Next Generation base station backhauling
Ethernet over PDH protocols including GFP Interoffice or enterprise LAN
ITU-T G.8040, VCAT ITU-T G.7043 and connection.
LCAS ITU-T G.7042. These protocols allow
Using interface bonding, RIC-LC creates a
service providers to dynamically allocate
scalable, large virtual pipe comprised of up
bandwidth to their customers by mere
to four, eight or sixteen E1 lines. The
changing the number of links bonded to
bonding is performed at the E1 level,
the virtual group, without stopping the
providing flexible bandwidth for different
service.
applications.
SFPs
For full details, see the SFP Transceivers
data sheet at www.rad.com
0H
RIC-LC
Ethernet Converter for Bonded PDH Circuits
and the product names Optimux and IPmux, are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders.
411-100-02/12 (1.0) Specifications are subject to change without prior notice. 19902012 RAD Data Communications Ltd. The RAD name, logo, logotype, and the terms EtherAccess, TDMoIP and TDMoIP Driven,
$ E1 interface (Default=balanced): OPTIONAL ACCESSORIES
Ordering U Unbalanced DC connection kit
Note: 1-, 4- or 8-port options are supplied with
STANDARD CONFIGURATIONS RM-33-2
BNC ports; 16-port units have RJ-45 ports and are
RIC-LC/E1/4UTP shipped with RJ-45 to BNC cable adapter.
Hardware kit for mounting one or two
RIC-LC/4E1/4UTP units in a 19-inch rack
RIC-LC/8E1/4UTP @ Ethernet ports: CBL-RJ45/2BNC/E1
RIC-LC/16E1/4UTP 4UTP 410/100BaseT RJ-45 to BNC adapter cable (if a 16-E1
Ethernet ports port unit with unbalanced interfaces is
SPECIAL CONFIGURATIONS 2NULL2UTP 210/100BaseT and ordered)
RIC-LC/!/$/@ 2SFP (100Fx) ports
AC power cord
! PDH ports:
E1 1E1 port CBL-MUSB-DB9F
4E1 4E1 ports Mini USB control port cable
8E1 8E1 ports
16E1 16E1 ports
Feature