Sie sind auf Seite 1von 5

Safety Critical Operations Course

Pre-assessment
(May 24-28, 2015)
Time Allocated: 30 minutes

Participant Name:
.................................................................................................................
.....
Position:
.................................................................................................................
.....

Question No.1: MULTIPLE CHOICES: Circle the letter of the statement


that best completes the sentence.

1. Process Safety Management System consists of : A B C


A. 12 Elements
B. 14 Elements
C. 16 Elements

Process Safety Information include? A B C D .2

A. Material Safety Data Sheets (MSDS)


B. Material and energy balance calculations
C. Block Flow Diagrams
D. All of the above

3. Pre-Start up Safety Review done when: A B C D


E
A. New Processes
B. Modified Process
C. New Facilities
D.Significant modifications that require a change in the process safety
information
E. All of the above

4. Management Of Change includes: A B C D


E
A. Raw material changes / substitutions
B. Organization changes
C. Process parameters
UEPS- Pre-assessment Course May 25-29, 2014 Page # 1
D.Facility changes
E. All of the above

: A Performance Standard is expressed on .5

A B C

A. Qualitative or Quantitative terms


B. Qualitative terms
C. Quantitative terms

6. The first step for Plant shutdown: A B C D


A. De -Gassing
B. De-Sludging
C. Liquid removal
D.Depressurization

7. Examples of Critical HSE Equipment A B C D E


F
A. Fire & Gas Detection System
B. Shutdown System
C. Un-interruptible Power Supply
D. Emergency Lighting
E. Safety Relief Valves
F. All of the above

8. Contractors are classified based on A B C


A. Level of operation Risk
B. Budget of contract
C. Number of their employees

9. Zone ZERO(0) in classifying Hazardous Area A B C

A. Area in which an explosive gas-air mixture is continuously present or


present

for long period

B. Area in which an explosive gas air mixture is likely to occur for short
periods in

UEPS- Pre-assessment Course May 25-29, 2014 Page # 2


normal operation

C. Area in which an explosive gas-air mixture is not likely to occur, and if


it occurs it will only exist for a very short time due to an abnormal
condition

10. Equipment Inspection & Certification shall be done by: A


B C
A. Company Certified Person
B. Approved Third Party
C. Approved Second Party

Question No. 2: Mark each sentence if true () or false (X):

1. Employee Participation is element of Process Safety Management


True False

2. Permits To Work System is an Administration Control.

True False

3. Process Hazards Analysis (PHA) is a tool to prevent Accidents.


True False

4. Material Safety Data Sheets (MSDS) consists of 12 Elements.

True False

5. Procedure is a briefed guide for steps to be followed

True False

6. Personnel Protective Equipment is the first option to prevent Accident

True False

7. Un-interruptible Power Supplies (UPS) is part of Plant Mechanical


Integrity

UEPS- Pre-assessment Course May 25-29, 2014 Page # 3


True False

8. IP 66 is the highest degree of protection of Electrical Equipment.


True False

9. Compliance Audits could be done for only one element of company HSE
MS Elements.
True False

10. Intrinsic Safety is type of protection, for which the energy in the
electrical circuit is held so low that sparks, arcs or temperatures capable
of causing ignition cannot occur.
True False

Question No. 2: Write the meaning of the following Abbreviation

SIS:

IP

MOC
..

MSDS
.

SOP
.

ESD

PPE

NDT
.

PSM

UEPS- Pre-assessment Course May 25-29, 2014 Page # 4


COMAH
..

Best of Luck

Best of Luck

UEPS- Pre-assessment Course May 25-29, 2014 Page # 5

Das könnte Ihnen auch gefallen